TRiSTAR VE-5817 Ceiling Fan Instruction Manual
- June 5, 2024
- Tristar
Table of Contents
VE 5817
PARTS DESCRIPTION
Instruction manual
SAFETY
- This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
- By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- This appliance is only to be used for household purposes and only for the purpose, it is made for.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
- Always attach the fan to the ceiling, never to the PowerPoint itself.
- The minimum distance between the blades of the fan and the floor has to be more than 2.3m. The minimum carrying capacity must be 100kg.
- Take account of the minimum separation distance from other objects and the room required around the fan.
- All electrical connections and connection cables must comply with the appropriate rules and match the operating instructions
- The fan must be properly earthed to avoid the risk of an electric shock.
- Never mount the fan in a moist or wet place.
- Be careful when working near the rotating blades.
- The fitting must be correctly installed if it is to operate reliably.
- If in any doubt consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened.
- Take note of the symbols when connecting wires: N=Neutral, L=Phase, = Earth, LS=Live switched.
PARTS DESCRIPTION
- Canopy with I.R. sensor
- Down rod
- Motor unit
- Fan blades
- Lamp
- Remote control
BEFORE THE FIRST USE
- Take the appliance and accessories out of the box. Remove the stickers, protective foil, or plastic from the device.
- Place the device in a place with at least 50 cm of free space around the unit.
Installation of the fan
- Secure the mounting plate to the ceiling with the provided two screws, spring washers, and flat washers. Ensure the support for the mounting plate must be capable of safely and securely holding the moving weight of the fan.
- Hang the fan assembly onto the mounting plate. The mounting plate has a lug recess on it, it must be aligned with the corresponding groove on the ball joint of the fan.
- Insert the remote control receiver between the bracket and the ball joint and the sensor as shown.
- Insert the male connector into the female connector (from the remote control receiver to the fan, and from the remote control to the terminal block).
- Connect the wires from the earthed mains supply to the terminal block.
- Lift up the canopy into place over the mounting plate. Ensure that you do not trap any wires.
- Install the fan blade assembly onto the motor by tightening the screws and spring washers.
- Connect the light kit by clipping together the two plastic male/female connectors.
- Fit the light kit to the switch housing by using the three light kit-fixing screws and star washers. Ensure that you do not trap any wires.
- Install the light bulbs (E27 max 46W, max 105x60mm, not supplied) to the lamp holder. Switch the power on to check the correct operation of the light and the fan.
- Install the lampshade onto the motor housing by rotating the lampshade clockwise.
Remote control:
• 2xAAA size batteries are required.
• Ensure batteries are inserted in the correct direction.
• When replacing, ensure both batteries are changed simultaneously.
USE
- Control the fan and light by pushing the corresponding buttons on the remote control as explained in the table below:
Remote control | Mode |
---|---|
ON/OFF | Turn light on or off |
2H | 2 hours timer function |
4H | 4 hours timer function |
8H | 8 hours timer function |
HI | Turn the fan on at high speed |
MED | Turn fan on at medium speed |
LOW | Turn fan on at low speed |
OFF | Turn fan off |
- The transmitter is infrared, the remote control must be pointed to the I.R. sensor on the appliance for proper operation.
- When using the timer function, the fan turns off after the selected 2, 4, or 8 hours.
- The lamp must be switched on and off manually by using the on/off button.
- The switch on the motor housing controls the direction of air movement:
– In cold weather: press the “UP” switch so that the blades push the hot air down and let it circulate through the room.
– In hot weather: Push the switch “DOWN” so that the blades will create a breeze and circulate the cold air through the room.
Note: Let the fan stop operating before using the direction switch in order to prevent any damage to the motor or injury. The switch should stay at the UP or DOWN position when the fan is working.
CLEANING AND MAINTENANCE
- Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pads, or steel wool, which damages the device.
ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its
durability but must be offered at a central point for the recycling of
electric and electronic domestic appliances. This symbol on the appliance,
instruction manual, and packaging put your attention to this important issue.
The materials used in this appliance can be recycled. By recycling used
domestic appliances, you contribute an important push to the protection of our
environment. Ask your local authorities for information
regarding the point of recollection.
Support
You can find all available information and spare parts at
www.tristar.eu!
WWW.TRISTAR.EU
Tristar Europe B.V. | Jules Verneweg 87
5015 BH Tilburg | The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>