MARLEY EM-JT002-SB Stir It Up Wireless Turntable User Guide

MARLEY EM-JT002-SB Stir It Up Wireless Turntable

PRODUCT MAP

1. Spindle
2. Tone Arn Rest Ho lder
3. Turntable
4. Tone Arn
5. 45 Adaptor
6. Stylus
7. Balance Weight
8. Needle Cover
9. Anti-Skating Knob
10. Off/33/45 Knob
11. Tone Arn Lift Level
12. Power Adaptor Mith
13. Interchangeable Plugs

FUNCTION LAYOUT

1.  RCA Line dut
2. Tuatha autton
3. Pre-np Switch luttan
4. VOL Kns
5. to Becarding
6. headphone jack
7. org/31/es kno
8. .Ati-skating Knot

SETUP

POWERING ON YOUR STIR IT UP WIRELESS

• Your Stir It Up Wireless uses an AC power supply and is powered by a standard wall outlet.
• Connect the power adaptor to the wall outlet.

BLUETOOTH PAIRING

• Power on the external Bluetooth device first before turning on the BT function on the Turntable.
• Press the BT button on the turntable to turn on the Bluetooth® transmitter.
• Press the button again to enable the unit to search the Bluetooth® device till the BT indicator light becomes solid. This will be indicated your devices are paired.
• Blue LED light flash
• Blue LED light stable

DISCONNECT BLUETOOTH° PAIRING

• Long press and hold the BT button till the BT indicator light turns off.
• The turntable will then disconnect from an external device.
• Blue LED light will turn off

PLAYING A RECORD

1. Put a vinyl record on the turntable.
2. Assemble the balance weight and set it to a proper position.
3. To adjust the balance weight rotate the balance weight at counter-cleck wise.
4. Lift and move the tone arn to the turntable. lace the tane arm on the adge af the record.
5. Ture the N Dial knees ta select the speed sceerding ta the record you are playing.
6. The turntable platter will auto stop when the music has ended. Lift the tane arn and place it ts tone arn rest manually.

To listen to side B, flip the record and repeat the above steps.

*33 RPM speed to play corresponding size 33 vinyl disc

*45 RPM speed to play corresponding size 45 vinyl disc To power the unit off Rotate the RPM Dial knob to the off position.

Note Remove the needle cover before you balance the tone arn. Hold tonearm whenever you make any adjustments or action so as to protect the tone arm. Do not try to adjust the balance weight while playing the record as this could break the needle and scratch the record. Re-secured the tonearm before transportation to protect the needle. Remove the balance weight before transportation to prevent damage or breakage to the unit. Do not stop or turn the platter manually. Moving or jarring the turntable without securing the Tone arn clasp could result in damage to the Tone arn.

ANTI-SKATING

Normally the anti-skating should be set to its minimum setting. Anti-s kate compensates for inward tracking forces that occur with certain pick-up when the tylus nears th center of the record. If the turntable is experiencing excessive skipping while nearing the center spindle, try increase the anti- skating in the increments indicated on the dial. Start by adding an increment of 1, test its performance, then increase it more, and so on.

Note: During adjusting the anti-skating knob, leave the tone arn and balance weight alone to prevent damaging the stylus (needle).

VOLUME CONTROL

1. Increase Volume: Rotate the Volume Knob clockwise.
2. Decrease Volume: Rotate Volune Knob counterclockwise.

HEADPHONE OPERATION VIA HEADPHONE JACK

Connect a set of headphones (not included) in the headphone jack. Note: Never put on the headphone till you have plugged in the headphones plug

USB TO PC RECORDING Download

Full instructions for the Audacity Software at: http://www.audacitytean.org/downloadL Connect the Turntable and the computer via the provided USB cable. Follow the instruction of the sof tware installation steps and operation interface.

COMPLIANCE INFO

SAVE THIS INSTRUCTION

provide reasonable protection against harmful interference in a residential Inarritu interference to radio communications. However, there s no guarantee that by turning the equipment on and on, the user is encouraged to try to correct the

• Reorient or relocate the receiving antenna
• Connect the comment into an outlet rit ediforant from at to win the
• Beaver, it connected. consult the dealer or an experienced radio technician for help.

this device complies with Fut radiation exposure limits set forth for an uncontrolled his device must accept any interference received, including interference that may Te emitter must not be co-oc:ated or operating m conjunction with any partner Any changes or modifications not expressly approved by the party responsible hie device complies with Innovation, Science, and Econorticevelop accept any interference, including interference that may cause undesired operation e device e present

References

• Bob Marley – Dedicated to the life & legacy of Tuff Gong.
• Declaration of Conformity - The House of Marley UK
• House of Marley Bluetooth Speakers, Headphones, Earbuds & Turntables Inspired by Bob Marley — One Love Movie Giveaway
• Audacity ® | Downloads
• House of Marley Bluetooth Speakers, Headphones, Earbuds & Turntables Inspired by Bob Marley - One Love Giveaway
• Declaration of Conformity - The House of Marley UK
• House of Marley | Bluetooth Speakers, Headphones & Earbuds inspired by Bob Marley

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>