milwaukee M12 MLED High Performance Flashlight Bare Unit User Manual

June 5, 2024
Milwaukee

milwaukee logo

milwaukee M12 MLED High Performance Flashlight Bare

milwaukee M12 MLED High Performance Flashlight Bare

TECHNICAL DATA M12 MLED

Lightning time with one fully charged battery (4.0 Ah)|
---|---
High Level| 5 hr (800 lm)
Low Level| 7 hr (325 lm)
Strobe| 7 hr (800 lm)
Colour rendering index (CRI)| 80
Colour temperature| 4000 K
Battery voltage| 12 V
Weight according EPTA-Procedure 01/2003 (1.5 Ah)| 0,7 kg
Protection class| IP 54

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors offer to retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Use only compatible Milwaukee chargers from the same battery platform for charging battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.
Don‘t use this tool in wet areas .
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

SPECIFIED CONDITIONS OF USE
The battery-lamp is intendend to be used light independent use away from mains supply.
Do not use this product in any other way as stated for normal use.

BATTERIES
Battery packs which have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, the battery packs have to be fully charged, after use.
To obtain the longest possible battery life, remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:

  • Store the battery pack where the temperature is below 27°C and away from moisture
  • Store the battery packs in a 30% – 50% charged condition
  • Every six months of storage, charge the battery pack as normal.

TRANSPORTING LITHIUM BATTERIES

milwaukee M12 MLED High Performance Flashlight Bare-1 milwaukee M12 MLED High Performance Flashlight
Bare-3

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.

  • The user can transport the batteries by road without further requirements.
  • Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried  ut by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries:

  • Ensure that battery contact terminals are protected and insulated to prevent short circuit.
  • Ensure that battery pack is secured against movement within packaging.
  • Do not transport batteries that are cracked or leak.
    Check with forwarding company for further advice.

How to Use

milwaukee M12 MLED High Performance Flashlight Bare-5 milwaukee M12 MLED High Performance Flashlight
Bare-6 milwaukee M12 MLED High Performance
Flashlight Bare-7 milwaukee M12 MLED High Performance Flashlight
Bare-8
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been 13 English 13 described, please contact one of our Milwaukee service agents.
If needed, an exploded view of the tool can be ordered. Please state the article no. as well as the machine type printed on the label, and order the drawing at your local service agents.

SYMBOLS

CAUTION! WARNING! DANGER!
Do not stare at the operating light source.
Please read the instructions carefully before starting the product.
Do not dispose of electric tools together with household waste material. Electric tools and electronic equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer for recycling advice and collection point.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals