milwaukee M12 LL Lantern Light User Manual
- June 5, 2024
- Milwaukee
Table of Contents
milwaukee M12 LL Lantern Light
TECHNICAL DATA M12 LL M18 LL
Lighting time with one fully charged battery (4.0 Ah)| |
---|---|---
High level| 8 hrs| 9 hrs
Medium level| 15 hrs| 18 hrs
Low level| 67 hrs| 75 hrs
Strobe| 16 hrs| 18 hrs
Battery voltage| 12 V| 18 V
USB output| 5,0 V / 2,1 A| 5,0 V / 2,1 A
Weight according to EPTA-Procedure 01/2003 (2.0 Ah)| 640 g| 960 g
Protection class| |
dust ( Ø ≥ 12.5 mm) and water resistance| IP 24| IP 24
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the product.
Do not dispose of used battery packs in the household refuse or by burning
them. Milwaukee Distributors offer to retrieve old batteries to protect our
environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only compatible Milwaukee chargers from the same battery platform for
charging battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with battery acid wash it off immediately
with soap and water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
Warning: Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance). Staring into
the light beam may result in serious injury or vision loss.
Don‘t use the product in wet areas .
SPECIFIED CONDITIONS OF USE
The Stick Light is intended to be used as a light source away from the mains supply. Do not use the product in any way other than stated for normal use.
BATTERIES
Battery packs which have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, the battery packs have to be fully charged, after
use.
To obtain the longest possible battery life, remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
- Store the battery pack where the temperature is below 27°C and away from moisture
- Store the battery packs in a 30% – 50% charged condition
- Every six months of storage, charge the battery pack as normal.
How to Use
Do not disassemble the work light. The LED light cannot be replaced.
Use only Milwaukee accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our Milwaukee
service agents.
If needed, an exploded view of the tool can be ordered. Please state the
article no. as well as the machine type printed on the label, and order the
drawing at your local service agents.
USB PORT
Devices connected to the USB port are supplied with power. Any device that uses more than 2,1 A of DC electrical current will trip a self-resetting function and disable the output
SYMBOLS
Please read the instructions carefully before starting the product.
CAUTION: Possibly hazardous optical radiation emitted from this product. Do
not stare at operating lamp. May be harmful to the eye.
Do not dispose of electric tools together with household waste material.
Electric tools and electronic equipment that have reached the end of their
life must be collected separately and returned to an environmentally
compatible recycling facility. Check with your local authority or retailer for
recycling advice and collection point.