milwaukee M12 JSSP Bluetooth Speaker User Manual
- June 5, 2024
- Milwaukee
Table of Contents
milwaukee M12 JSSP Bluetooth Speaker
TECHNICAL DATA M12 JSSP
Battery voltage 12 V
Music power 5 W
Weight without packing and battery 0.49 kg
USB output 5.0 V/2.1 A
Sound quality AUX. Input 35 Hz – 20 kHz
Bluetooth input 55 Hz – 16 kHz
Transmission range min. 10 m
Runtime (4.0Ah) 25 h
WARNING!
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SPEAKER SAFETY WARNINGS
Never disassemble or modify this apparatus in any way.
Do not use this apparatus near water.
Clean only with dry cloth. Certain cleaning agents and solvents are harmful to
plastics and other insulated parts. Keep the apparatus handle clean, dry and
free of oil or grease.
Refer all servicing to qualified service personnel.
Do not install near any heat sources.
No flame sources, such as lighted candles, should be placed on the apparatus.
It shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
Do not dispose of used battery packs in the household refuse or by burning
them. Milwaukee Distributors offer to retrieve old batteries to protect our
environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only System M12 chargers for charging System M12 battery packs. Do not use
battery packs from other systems.
Never break open battery packs and chargers and store only in dry rooms. Keep
dry at all times.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with battery acid wash it off immediately
with soap and water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
This appliance is not intended to be used or cleaned by persons with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge,
unless they have been given instructions concerning the safe use of the
appliance by a person legally responsible for their safety. They should be
Msupervised while using the appliance. Children shall not use, clean or play
with this appliance, which when not in use should be secured out of their
reach.
SPECIFIED CONDITIONS OF USE
The Bluetooth speaker can play back audio signals from connected audio
devices.
Via USB connection the speaker can charge USB devices.
Do not use this product in any other way as stated for normal use.
USB PORT
Devices connected to the USB port are supplied with power.
Any device that uses more than 2,1 A of DC electrical current will trip a
self-resetting function and disable the output.
POWER BUTTON
Power on:
Press the / button.
LED turns on.
USB powers on.
Fuel gauge illuminates to show current battery level for 3 seconds.
Bluetooth enters connecting mode and searches for last paired device.
Power off:
Press the / button.
LED turns off.
USB powers off.
Speaker powers off.
Bluetooth pairing:
Press and hold the / button for 3 seconds. LED light will flash to indicate
speaker is in pairing mode.
Select “M12 Speaker” on the Bluetooth capable device
- Speaker plays connected tone.
- LED light stays illuminated.
Bluetooth connecting:
When device is turned on and no AUX cable is plugged in.
Speaker will default to Bluetooth mode and begin connecting.
LED will fl ash.
When speaker locates bluetooth device:
- Speaker plays connected tone.
- LED stays illuminated.
Loss of Bluetooth connection:
If connection between speaker and bluetooth device is lost, speaker will immediatly try to reconnect to bluetooth device.
The LED will fl ash
Bluetooth connecting to a different device:
Press and hold the / button for 3 seconds until the LED flashes. It will then be in pair mode and can be connected to a different device.
VOLUME BUTTON + / –
Volume increase – press button +.
Volume decrease – press button -.
AUX IN
When 3.5 mm AUX cable is plugged in speaker input will automactically switch
to Aux in. When AUX cable is unplugged speaker will change back to Bluetooth
mode. LED indicator light remains on.
TROUBLESHOOTING
BATTERIES
Battery packs which have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after
used.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from
moisture
Store the battery packs in a 30% – 50% charged condition
Every six months of storage, charge the pack as normal.
MAINTENANCE
Use only Milwaukee accessories and Milwaukee spare parts.
Should components need to be replaced which have not been described, please
contact one of our Milwaukee service agents(see our list of guarantee/service
addresses).
If needed, an exploded view of the tool can be ordered. Please state the ten-
digit No. as well as the machine type printed on the label and order the
drawing at your local service agents.
SYMBOLS
CAUTION!
WARNING! DANGER!
Remove the battery pack before starting any work on the machine.
Please read the instructions carefully before starting the machine.
Do not dispose of electric tools together with household waste material.
Electric tools and electronic equipment that have reached the end of their
life must be collected separately and returned to an environmentally
compatible recycling facility.
Check with your local authority or retailer for recycling advice and
collection point.
This tool is only suitable for indoor use. Never expose tool to rain.
Safety class III