MarCum PHDL Pursuit HD Handheld Underwater Fishing Camera User Guide

June 3, 2024
MarCum

PHDL Pursuit HD Handheld Underwater Fishing Camera
User GuideMarCum PHDL Pursuit HD Handheld Underwater Fishing
Camera

PHDL Pursuit HD Handheld Underwater Fishing Camera

Select a Viewing Angle
The Pursuit SD+ comes with an adjustable camera head to achieve a multitude of performance-enhancing viewing angles. To achieve a new position, simply adjust the camera clip atop the camera to a different tab. To achieve a down view, remove the camera clip from the positioning system atop the camera head.

Deploy The Camera
Managing 50 feet of cable just got easier with our new Integrated Cable Cord Reel. To deploy the camera, simply unlock the spool, detach the camera cable from the cable reel and start spooling offline. A slow and steady pace will keep the cable from unspooling. Once you have reached your desired depth, relock the spool and reconnect the cable to the notch to hold it in place.

Power Button
The bottom button powers the system on and off.
Press the power button to turn the system on. A start-up screen with the MarCum logo will briefly show, followed by the video image. To turn the system off, press and hold the power button for 5 seconds until the system shuts down.

LED / Up Arrow Button
The LED/Up arrow button serves several purposes.
When selected it will turn on and increase the intensity of the LED lights. An on-screen display will be shown momentarily to indicate the light intensity level selected. When in the menu section of the system, this button serves as an up selection.

IR/Down Arrow Button
The IR/Down arrow button serves several purposes.
When selected, it will turn on and increase the intensity of the Infrared lights. An on-screen display will be shown momentarily to indicate the light intensity level selected. When in the menu section of the system, this button serves as a down selection.

Menu/Enter Button
The Menu/Enter button serves a dual purpose.
Pressing once accesses the Menu system.
Once inside the menu system, it functions as the enter button.

Accessing The micro-SD
Card To access the micro-SD card slot, open the rectangular rubber cap on the left side of the unit. The card can be inserted by placing it into the slot and pressing downwards until it clicks into place. To remove the micro-SD card, press down on the card. The PURSUIT SD+ will support up to a 128GB Class 10 micro-SD card (be sure the card has a class 10 symbol like the example above).

Record Button
The Record button serves a dual purpose to both take a picture (JPEG) and record a video (MP4). The PURSUIT SD+ has a built-in DVR that allows you to capture all the actions below. All recorded media is saved to a micro-SD card (not included).

Recording Video In MP4 Format
MarCum PHDL Pursuit HD Handheld Underwater Fishing Camera - Figure
9 To record a video, press and hold the record button for approximately 3 seconds until a Red Camera with a blinking red circle icon appears in the upper left-hand corner of the screen. The recording time will be displayed on the top-middle of the screen. To stop the recording, press the REC button again. Once the icon disappears, the unit is no longer recording.

Taking a Photo
The PURSUIT SD+ has the ability to take a screenshot photo of what is currently visible on the screen. To take a picture, complete a quick press of the REC button. A red camera icon will momentarily appear in the upper left- hand corner of the screen and then disappear, indicating that a picture was taken.

Accessing Media
MarCum PHDL Pursuit HD Handheld Underwater Fishing Camera - Figure
11 Previously recorded videos and photos can be accessed by pressing MENU and then selecting LIBRARY by pressing the MENU/ENTER button. Once in the Library sub-menu, you can select either PHOTO or VIDEO. Use the Up and Down arrows to cycle through the saved media. All video files will automatically start when selected.

Charging
To charge the PURSUIT SD+, power the system off (5-second hold of the power button) and locate the rubber cap on the left side of the monitor. Lift the rubber cap to expose the USB Charging port. Insert the supplied USB cable and connect it to the supplied charger, or any USB port. Once the charger is connected to either the wall outlet or the USB  port, the charge indicator light (next to the USB port) will illuminate.

OSD – On-Screen Display

The PURSUIT SD+ camera system features Five On-Screen Displays (OSD), Depth, Camera Direction, Temperature, Battery Indicator, and Recording Status.

Depth
A depth OSD will display in the lower right-hand corner of the screen. This feature alerts the user of the depth of the camera. Camera depth will only show when in the water.
Outside of water, it should read 0.
Camera Direction
The direction the camera is facing is displayed in the upper right-hand corner of the screen. This direction will display as directions of the compass (N, NE, E, etc.) If the camera direction is not accurate it can be calibrated by following the instructions in the SYSTEM SETTING menu.

Temperature
The current temperature of the water will display in the lower left-hand corner of the screen. The units can be changed from Fahrenheit to Celsius, or vice versa in the  MONITOR SETTING menu. The camera will not detect the air temperature correctly.

Battery Status Indicator
The PURSUIT SD+ has an on-screen display of the battery status found in the upper left side of the video image. Once the video image starts the battery status indicator will detail a series of green bars. Three full green bars will indicate a full charge.

Recording Status
The PURSUIT SD+ has an on-screen display found in the upper left side of the video image. Once the REC has been pressed the red camera icon will appear in top left corner of the screen, indicating that the camera has begun recording.

Video Out Capable
The PURSUIT SD+ comes with a Video Out adapter cable so you can watch the action on your big screen inside of a MarCum PHDL Pursuit HD Handheld
Underwater Fishing Camera - Figure 19

Warranty

MarCum warrants this product to be free from defects in materials and workmanship for one year from the date of purchase. This warranty applies to customers who properly  complete the Online product registration form found on the MarCum Technologies Website: www.MarCumTech.com

Service

If your system is malfunctioning, check the support section of our website. You may find that the solution to your problem is something you can resolve yourself. If you need to send it in, there is no need to contact our office. Getting repairs made is as simple as going to our website, www.MarCumTech.com clicking the support tab, and then filling out the MarCum Warranty claim.MarCum PHDL Pursuit HD Handheld
Underwater Fishing Camera - Figure 21

Manufacturer: Electronics Technologies LLC, 3943 Quebec Ave N Minneapolis, MN 55427
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; A battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

www.MarCumTech.com
MarCum User Manuals are available for download from www.MarCumTech.com
Les manuels d’utilisation de MarCum sont disponibles en téléchargement sur www.MarCumTech.com
2022-0215

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals