mao Baby Monitor with Camera – 4.3 Inch – Premium Baby Monitor Instruction Manual

mao Baby Monitor with Camera – 4.3 Inch – Premium Baby Monitor

BEFORE USE

Before use, please read this manual carefully.

Only connect the appliance to an earthed wall socket.

This appliance is for household use only. When using electrical appliances, basic satety precautions should always be followed to avoid ftires, electric shocks, burns, or ofher injuries and damage. Read\ these operating and satety instructions caretully.

PARTS IN THE PACKAGING

1. Camera
2. Monitor
3. Manual
4. Power adapter
5. Power cable

PRODUCT STRUCTURE

1. Photo sensitive sensor
2. Lens
3. Microphone
4. Indicator
5. Power interface
6. Temperature sensor
7. Button
8. Antenna
9. ON/OFF/Eco mode
10. Menu button/back
11. Navigation button
12. OK button
13. Music play button
14. Power interface
15. Talk (long press)/ adjust (short press) button
16. Status indicator
17. Microphone
18. RESET button

ICONS & INDICATORS

• No signal connection between the receiver and the camera
• Signal strength between the receiver and the camera
• The Lullaby function is enabled.
• Displaying current room temperature
• Show current battery level
• Temperature alarm has been turned on
• Feed reminder has been turned on
• Audible alarm has been turned on
• No camera is added or the camera is disconnected from receiver
• Audio alarm
• Temperature alarm reminder
• Feed alarm reminder
• Low battery alarm reminder

Explanation LED indicator:
The first to the fifth green indicators flash from low to high: indicating the received volume; the sixth red indicator is steady on: indicating the lithium battery is being charged; (displayed whether it is powered on or off)

PLACEMENT

Place the Camera Unit in a convenient location (e.g. on a table or a shel and point the camera lens toward the area you want to monitor. Note:
Do not place the Monitor Unit within baby’s reach. If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.
Warning:
Children could strangle in the cords. Keep this cord out of the reach of children more than 3feet(0.9m) away. Never use extension cords with AC Adapters.Only use the AC Adapters provided.

BEFORE USE

Camera

1. Powering the Camera Unit Insert one end of the included charging cable into the USB jack on the back of the camera. Insert the other end into the included power adapter. Then insert the adapter into the socket.
   When energized, the camera will be automatically turned on. (The camera indicator flashes green. At this point. the camera is turned on successfully).
   Receiver

2. Power on the receiver (The receiver is provided with a lithium battery, if the receiver has enough power, please go directly to the Step

3. Insert one end of the charging cable into the USB charging jack on the side of the receiver.

4. Receiver starting up
   Press and hold the “ON/OFF” button on the receiver to turn it on. Note: This device has been paired before leaving the factory. If the receiver fails to display on the monitor screen as described above, please re-try the device pairing operation. For detailed steps, please refer to Page 8 “Camera Pairing”.

SETTINGS

Receiver
Functions of the Babysitter is user definable, to best satisfy your demands. Audio and temperałure alarms may oter automatic notitication to you. This chapter will introduce the user-detinable setings item by item.
Access receiver menu
In states of live view, press MENU button on the monitor can enter into MENU list; In states of non-live view, press MENU button on the monitor can return to previous intertace level. Camera
Add camera

1. Select Camera, and press OK to enter the function.
2. Select the channel to be paired, and press OK to contirm. Then select “Add Camera” and press OK to contirm.
3. When the device prompts “Start pairing, please press the SEl button on the camera.”, press the SET button on the camera, and at this point, the device enters pairing mode. After pairing succeeds, the screen will iump to a real-time monitoring screen.

Delete camera

1. Select Camera icon, and press OK to enter the tunction.
2. Select the channel to be deleted, and press OK to confirm. Then select “Delete Camera” and press OK to confirm.

LULLABIES

The digital wireless baby monitor has 5 lullabies. They can help you lull your baby to sleep.

1. Select Music note icon Play, and press OK to enter the tunction.
2. Select the music you want to play, press OK to contirm, and the camera will play the lullaby of your choice. Press OK again, and the lullaby pauses. Select “All” to play all the lullabies i settings are completed, press MENU to return. a loop. Ater Notice: In the current intertace, press the lett/right arrow keys to switch lullabies and the up/down keys to adjust the volume.
3. You can also play music quickly through the music note play button on the panel.

VOX MODE

VOX mode allows you to control the sound activation ot your baby unit, andcanalso saves the batery lite ot parent unit. It there is no soundaround the baby unit within 30 seconds, it will stop audio transmission and turn off the screen of the parent unit. When the baby unit detects any sounds louder than the sensitivity level, it will start fransmitting the signal of the parent unit again and turn on the screen ot the parent unit.

1. Select Microphone lcon Alarm Settings, press OK to enter the settings page.
2. Select: Low, Medium, High, Off as needed and press OK to contirm.

Note:

1. Low sensitivity: The baby have to make a lot of sound before the VOX function will be activated. High sensitivity level: the baby don’t have to make a lot of sound before the VOX function will be activated. Press Off will turn off this mode.
2. Video ON/OFF button
   • When VOX function is on; short press video on/ott button canturn the screen into Black and can turn on the screen again when VOX level will be activated.
   • When VOX function is Off; short press video on/off button will turn the screen into Black and the baby sound will be transmitting to the monitor as an audio monitor only, unless the video on/ott button being pressed again.

OTHER SETTINGSS

Time settings Calibrate time on the receiver.

1. Select teh gear icon settings, and press OK to enter the settings page
2. Select clock icon Time Settings, and press OK to enter the settings page. After settings are completed, press OK to confirm.

Language selection
Switch language displayed on the receiver.

1. Select Gear lcon settings, and press OK to enter the setings page.
2. Select globe icon Language Settings, and press OK to enter the setings page. Select a language you need and press OK to confirm.

Alarms settings
Sound alarm settings
Switch the alarm sound” ON /OFF” on the receiver

1. Select the gear icon for Settings, and press OK to enter the settings page.
2. Select Alarm Sound Settings, and press OK to enter the settings page.
3. Select “ON/OFF” and press OK to confirm.

Temperature alarm settings
When it is too hot or too cold in your baby’s room, the temperature alarm will push a notitication to your receiver.

1. Select Alarm Settings, press OK to enter the settings page, and seled “Alarm ” settings.
2. Select “Celsius, Fahrenheit ” as needed and press OK to confirm.
3. Select “Alarm ” “ON, OFF ” as needed.

Alarm clock setings

You can set the feeding alarm to prevent you from forgetting to feed your baby as busy or for other reasons, which may atect your baby’s healthy growth

1. Select Alarm Setings , press OK to enter the settings page and selec “Alarms” Settings.
2. Select the time periods and quantity of “Alarms ” as needed, and press OK to enter the setings page. Atter the settings are completed, press OK to contirm.

Restore the receiver to default settings.

1. Select Setitings, and press OK to enter the settings page
2. Select Restore to Default Settings, and press OK to enter the settings page
3. The device will prompt “Restore to default settings? “. Select YES and press OK to contirm. The device begins to execute a tactory reset.

View version information
View version information of the receiver and camera.

1. Select settings, and press OK to enter the settings page.
2. Select Version Information, and press OK to enter the version information view page.

DISPOSAL

Do not dispose of the device in normal domestic waste.
Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.
Observe the currently valid regulations. In case of doubt, consult your waste disposal tacility.

WARRANTY

Dear Valued Customer,
Thank you very much for purchasing a MOA product.
We wish you to intorm you that this product is covered by a warranty which complies with all legal provisions concerning existing warranty and consumer rights in the country where the product was purchased.
Should you find any defect or malfunction of your MOA product, please contact the appropriate Customer Care Center.
Sincerely yours,
The MOA Team

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>