poly 202652-101 Voyager Focus UC with Charge Stand User Guide
- June 5, 2024
- Poly
Table of Contents
Poly 202652-101 Voyager Focus UC with Charge Stand
Overview
Headset
- Volume up/down
- Track backward*
- Play/pause music*
- Track forward*
- ANC active noise canceling
- Charge port
- Active call = mute/unmute
- Idle = OpenMic (hear your surroundings)
- Headset LEDs for pairing, battery status, online indicator
- Call button ([ ])
- Power button
- Bluetooth pair button
NOTE *Functionality varies by application. Does not function with web- based apps.
Charge Stand*
- *Contents may vary by product.
- Both the charging stand and micro USB cable can be plugged into either a computer or wall charger. It is only necessary to plug the charge stand into a computer to update the firmware.
USB Bluetooth adapter
- USB LEDs What they mean
- Red and blue flashes Pairing
- Solid Blue Pairing successful; Connected
- Blue flashes On a call
- Solid red Mute active
- Purple flashes Streaming music/media from a computer.
Connect and pair
Connect to PC
- Your Bluetooth USB adapter comes pre-paired to your headset.
- Insert the Bluetooth USB adapter into your laptop or PC.
- Pairing is successful when you hear “pairing successful” and the USB adapter LED is solid blue.
- OPTIONAL: Headset call control Some softphones require the installation of Plantronics Hub for Windows and Mac (plantronics.com/software) to enable headset control (answer/end and mute) functionality.
- Plantronics Hub software also allows you to customize your headset’s behavior through advanced settings and options.
Configure USB adapter
-
Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music, you will need to configure your Bluetooth USB adapter.
Windows -
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound
-
Playback tab. Select Plantronics BT600, set it as the Default Device, and click OK.
-
To pause music when you place or receive calls, go to the Start menu > Control Panel > Sound > Communications tab and select the desired parameter.
Mac -
To configure the Bluetooth USB adapter, go to the Apple menu > System Preferences > Sound. On both the Input and Output tabs, select Plantronics BT600.
Pair to mobile device
To put your headset in pair mode, press and hold the power button towards the Bluetooth icon until you hear “pairing” and the headset LEDs flash red and blue.
- Activate Bluetooth on your phone and set it to search for new devices.
- iPhone Settings > Bluetooth > On*
- Android Settings > Bluetooth: On > Scan for devices*
- *Menus may vary by device.
- Select “PLT Focus.”
- If necessary, enter four zeros (0000) for the passcode or accept the connection.
- Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.
- Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter.
Pair USB adapter again
- Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it.
- Put your headphones in pair mode.
- Put your Bluetooth USB adapter into pair mode by gently pressing and holding the pair button with a pen or paperclip until the Bluetooth USB adapter flashes red and blue.
- Pairing is successful when you hear “pairing successful” and the Bluetooth USB adapter LED is solid blue.
Fit and charge
Wear on the right or left
- To position the microphone on the right or left side, rotate the microphone boom up and over. Adjust the boom so it points to the corner of your mouth.
- TIP Your headset senses when you change the microphone boom from one side to the other and syncs the audio and controls specific to each side.
Charge your headset
Before using, charge the headset fully to reset the accuracy of the talk time prompts. Charge your headset with the charging stand or the micro USB cable. The headset LEDs flash when charging. It takes up to 2 hours to fully charge your headset. The LEDs turn off once charging is complete. NOTE Both the charging stand and micro USB cable can be plugged into either a computer or wall charger. It is only necessary to plug into a computer to update the firmware.
- Headset LEDs Battery status
- 4–5 blue blinks Battery high
- 2–3 blue blinks Battery medium
- 1 red blink Battery low
- flashing red Battery critical; Recharge headset
Check headset battery status
- There are several ways to check your headset battery status.
- Wearing the headset, tap the Call button and listen to the voice alert (smartphone only).
- When not wearing the headset, tap any button except the Call button and observe the headset LEDs.
- Place the headset in the charging cradle and observe the headset LEDs.
Load software
- Some softphones require the installation of Plantronics Hub for Windows and Mac to enable headset control (answer/end and mute) functionality.
- Install Plantronics Hub for Windows and Mac onto your computer by visiting plantronics.com/software.
- Manage your headset settings with your computer or mobile device with Plantronics Hub for
- Windows and Mac or Plantronics Hub for iOS and Android, respectively (plantronics.com/software)
The basics
- Volume up/down
- Track backward*
- Play/pause music*
- Track forward*
- Active noise canceling
- Charge port
- Active call = mute/unmute
- Idle = OpenMic (hear your surroundings)
- Headset LEDs for pairing, battery status, online indicator
- Call button ([ ])
- Power button
- Bluetooth pair button.
- *Functionality varies by application. Does not function with web-based apps.
- Make/Take/End Calls
- Answer or end a call
- Tap the Call button.
- Call back last call (smartphone)
- To dial the last number you dialed, double-tap the Call button.
- Voice dial (smartphone)
- If your smartphone has a voice-enabled assistant, press and hold the Call button for 2 seconds and wait for the phone prompt and then tell the phone to dial the number of a stored contact.
- Mute/unmute
- While on an active call, choose:
- Tap the red Mute button
- Take off/put on your headset while on an active call (requires active smart sensors)
- **Mute on reminder***
- Plantronics Hub for Windows and Mac required (plantronics.com/software)
- If you have muted an active call and you start to speak, then a desktop notification reminds you that you are on mute. You can add a voice prompt notification by managing your mute features with Plantronics Hub for Windows and Mac.
- OpenMic
- While not on a call, tap the red Mute button to activate OpenMic and hear your surroundings. Control the level of ambient noise you hear by adjusting the volume wheel.
- Volume
- Rotate the volume wheel forward (+) or backward (–) to control the volume
- Play or pause music
- Choose:
- Put on/take off the headset (requires active smart sensors)
- Tap the Play/pause button
- Functionality varies by application. Does not function with web-based apps.
- Track selection
- Tap the Forward button or Back button to control the track selection.
- Functionality varies by application. Does not function with web-based apps.
- Use sensors
- Smart sensors respond when you put on or take off your headphones.
Reset sensors
- You may need to reset the sensors if they are not working as expected.
- There are two ways to reset the headset sensors. Choose:
- With your headset powered on, charge your headset on the charge stand for 10 seconds
- Press and hold both the Mute and Play/pause buttons for more than 4 seconds until the
- LEDs flash purple twice, being careful to not touch the earcup padding or allow it to come in contact with surfaces.
Disable sensors
You can disable your headset’s smart sensors in several ways Manage sensors through Plantronics Hub software Hold both the Mute and Call buttons for more than 4 seconds until the LED flashes purple then red. Repeat to reactivate; the LED flashes purple then blue Sensors cannot be disabled while streaming audio.
ANC
Active Noise Cancelling (ANC) reduces external noise and enhances your music and sound quality. Your headset ships with ANC on. To turn ANC off, slide the switch away from “ANC.”
More Features
DeepSleep mode
If you leave your headphones powered on but out of range of your paired phone or USB adapter for more than 7 days, your headset conserves its battery power by entering into DeepSleep mode. Once back in range with your phone or USB adapter, press the Call control button to exit DeepSleep mode.
Answer calls from a second device
It’s easy to answer calls from two devices (including a softphone). When on a call, you hear a ringtone notification of the incoming call from the second paired device. To answer a second call from the other device, first, tap the Call button to end the current call and tap the Call button again to answer the new call. If you choose to not answer the second call, it will go to voicemail.
Change language
You can change the voice prompts language of your headset (for example “mute on”). Download Plantronics Hub for Windows/Mac at plantronics.com/software. Dock your headset in the charging stand and plug it directly into your computer. Disconnect your headset from other devices; this includes unplugging your USB adapter from the computer. Open Plantronics Hub for Windows/Mac and go to Settings > Language to view language choices for voice prompts.
Update firmware
Firmware updates are designed to keep your headset current with the latest technology Update your firmware to
- Change voice alert/command languages
- Improve performance
- Add new features to your device
- Download Plantronics Hub for Windows/Mac at plantronics.com/software.
- To update your headset firmware, dock your headset in the charging stand and plug it directly into your computer. Disconnect your headset from other devices; this includes unplugging your USB adapter from the computer.
- Open Plantronics Hub for Windows/Mac and check the Updates tab for firmware update alerts.
- Do not answer or place a call during the update.
What’s in the box
Contents may vary by product.
Accessories
Sold separately at plantronics.com/accessories.
Troubleshoot
Support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>