WEGOBOX-01 Intelligent Medical Consumables Management Cabinet User Manual
- June 5, 2024
- WEGO
Table of Contents
WEGOBOX-01 Intelligent Medical Consumables Management Cabinet
Product Introduction
This product is mainly used for storage and management of high-value consumables in warehouses of the operating room, the interventional room /DSA catheterization room, the endoscopy room / the gastroscopy center and other departments. Product Function By using UHF RFID technology and long-distance batch identification, the refined management of high-value consumables in warehouses can be realized through a one-thing one-code management mode.
Product Model
Product Function
This product can be used in warehouses of the operating room, the interventional room / DSA catheter room, the endoscope room / the digestive gastroscope center and other departments, for access, take, return, inventory, query, multi-service early warning and other functions of high-value consumables, and can realize real-time record of personnel business operations
Product Diagram
- Camera
- Laminate
- 14″Operation screen
- Card swiping module
- Universal wheel
- LCD display screen
- Hanging piece hook
- Finger vein module
- Power cable interface
- Network interface
- Power switch
- Emergency zipper
- Central control cover plate
Matters need Attention
-
Open the door urgently
When it is found that the cabinet door cannot be opened normally, the emergency treatment plan is to pull the emergency zipper urgently, open the cabinet door, and take or return consumables. -
Safe Operation
When troubleshooting, it is necessary to open the central control cover plate⑬, make sure that the static electricity has been released or wear anti- static gloves before carrying out relevant operations. -
Finger vein Entry
- Please do not press the finger vein module hard when registering, otherwise, it will easily lead to unclear blood vessel scanning and poor quality of finger vein template.
- When registering, it needs to be verified at least 3 times, and the finger should be lifted and placed after each placement.
- When registering, do not press the glass surface with your finger, but place it in the module groove. It is recommended to use the index finger or middle finger
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.