Xiaomi 100492 Redmi AirDots Wireless Earbuds User Guide
- June 5, 2024
- Xiaomi
Table of Contents
Xiaomi 100492 Redmi AirDots Wireless Earbuds
Charging:
- Remove product from packaging and all the protective tape and stickers
- Place earphones back in the charging case and plug-in USB to allow to charge for an hour or so. It should light red when charging on the box and earphones. Red also means that it is disconnected from Bluetooth.
- If there is a white light when taken out of the box, it means it is connected to the Bluetooth of the mobile phone. When there is a white light when in the charging box for a minute and then goes out, it means the earphones are fully charged.
Set up and Pairing:
-
Once charged, remove the earphones from the charging box and it will turn on.
-
Turn on Bluetooth and search for “Redmi AirDots_R” or “Redmi AirDots_L” depending on which earphone took out to pair the device. If it does not appear, please refresh the Bluetooth device list and search again. The other earpiece should connect automatically.
-
To pair only one of the earphones (singular), take out the earphone and the white light will flash quickly for about 4 – 5 seconds, once the white light starts to flash slow, check the Bluetooth device list on your smartphone and pair it. Works for either side of the earphones.
Turning on/off the earphones: -
To turn earphones on press the multi-function key (about 1 – 2 seconds).
-
To turn off the earphone, either put it back in the charging box or press the multi-function key for about 5 seconds until the white light turns red and then off.
Operation:
- Call function (answer, hang up or reject call)
- Incoming calls: Press the multifunction key (end of earbud) to answer the phone
- Press the multi-function key again to hang up
- Reject the call by pressing and holding the multi-function key for a few seconds
- Music or video
- To pause or play the music/video while it is running, press the multi-function key
- Voice assistant
- To turn on the voice assistant, double click the multi-function key
- Supports Xiaomi voice control, Siri and Google assistant
- The phone needs to support voice control to enable this setting
- Airdots Headset reset:
- Reset is generally used if the product cannot connect successfully.
- Press the multi-function key on both Left and right earphones for 15 seconds until the red and white flashes alternately for 3 times then turns off
- Remove or unpair the Xiaomi Redmi Airdots on your smartphone’s Bluetooth device list and delete the connection record then refresh.
- Reset successful and ready to start the pairing process again
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>