ASSMANN WU EC Series Dual Band Wireless USB Adapter Installation Guide
- June 5, 2024
- Assmann
Table of Contents
ASSMANN WU EC Series Dual Band Wireless USB Adapter
Windows OS Operating Instructions
Driver Installation
Please follow the following instructions to install your new wireless USB Adapter:
-
Insert the USB wireless network card into an empty USB 2.0/3.0 port of your computer when computer is switched on. Never use force to insert the card, if you feel it’s stuck, flip the card over and try again.
-
The following message will appear on your computer, click ‘Cancel / Close’.
Under Windows Vista and Windows 7 -
Insert the driver CD into your CD-ROM, open the “D” drive. Select proper file for your system “Windows/Mac/Linux”
-
Double left-click on the setup.exe file and follow the direction to finish the installation
-
Once the installation is finished the computer will be asked to reboot. you can click ‘Finish’ and reboot the computer to finish the installation of driver files
-
Insert the USB wireless network card into an USB 2.0/3.0 port of your computer, the system will find the new hardware and will install the drivers automatically.
A new icon will appear near the clock of system tray:
Connect to the Internet:
-
After finishing driver installation, click adapter utility from your taskbar or programs folder. Click “available networks”, select the wireless access point you would like to connect and press “Add to Profile” button.
-
Fill in the security information if any requirement, and then click “OK” to connect the wireless network.
-
Connected successfully. It will show the status screen.
Left-click the icon will launch wireless network configuration utility, and you can right-click the icon to show the quick menu of configuration utility. This icon also uses different colors to show the status of wireless connection:
- Wireless connection is established good signal reception.
- Wireless connection is established weak signal reception.
- Connection is not established yet.
- Wireless network card is not detected.
- For detailed instructions of wireless network configuration utility, please see next chapter.
Mac OS Operating Instructions
- Please copy all files on CD to the desktop.(If is compressed package， please decompression through windows system first, then copy to the MAC system), open the folder and find the Driver – as below picture:
- Select the corresponding folder for the system – as below picture:
- Select the corresponding version – as below picture (my computer version:10.10.5):
- Please double-click to open Installer.pkg:
- Please choose “Continue “ to enter the next step.
- Please choose “Continue “ to enter the next step.
- Please choose “Continue “ to enter the next step.
- Please choose “Agree“ to enter the next step
- Please choose “Install “ to enter the next step.
- Please input your power-on password here, then cleck “Install Software”. If no password please click “Install Software” directly to enter the next step.
- Please choose “Continue Installation“ to enter the next step.
- It show “Installing Wireless USB Adapter Driver”, please waiting a few minutes.
- Installaton successful, please choose “Restart”.
- You can see installed the wireless card here after you restart the computer .
