Cylinda KFS6180NEE Side by Side Refrigerator User Manual

: June 3, 2024
: Cylinda

Table of Contents

Cylinda KFS6180NEE Side by Side Refrigerator
Safety Instructions
Your Refrigerator
Installation
Preparation
Operating the Product
Maintenance and cleaning
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Cylinda KFS6180NEE Side by Side Refrigerator

Cylinda-KFS6180NEE-Side-by-Side-Refrigerator-product

Dear Customer,

Please read this manual before using the product
Thank you for choosing this product. We would like you to achieve optimal efficiency from this high-quality product which has been manufactured with state-of-the-art technology. To do this, carefully read this manual and any other documentation provided before using the product and keep it as a reference. Heed all information and warnings in the user manual. This way, you will protect yourself and your product against the dangers that may occur. Keep the user manual. Include this guide with the unit if you hand it over to someone else.

The following symbols are used in the user guide:

The hazard that may result in death or injury.
NOTICE A hazard that may cause material damage to the product or its surroundings
Important information or useful tips on the operation.
Read the user manual.

INFORMATION

The model information as stored in the product database can be reached by entering the following website and searching for your model identiﬁer (*) found on the energy label.
https://eprel.ec.europa.eu/.

Safety Instructions

This section includes the safety instructions necessary to prevent the risk of personal injury or material damage.
Our company shall not be held responsible for damages that may occur if these instructions are not observed.
Installation and repair operations shall always be performed by Authorized Service.
Always use genuine spare parts and accessories.
Original spare parts will be provided for 10 years, following the product purchasing date.
Do not repair or replace any part of the product unless specified expressly in the user manual.
Do not perform any modifications on the product.

Purpose of usage

This product is not intended for commercial use and it shall not be used out of its intended purpose.
This product is intended for operating interiors, such as households or similar.
For example;
- In the staff kitchens of the stores, offices and other working environments,
- In farmhouses,
- In the units of hotels, motels or other resting facilities that are used by the customers,
- In hostels or similar environments,
- In catering services and similar non-retail applications.

This product shall not be used in open or enclosed external environments such as vessels, balconies or terraces. Exposing the product to rain, snow, sunlight and wind may cause risk of fire.
Safety of children, vulnerable persons and pets

This product may be used by children aged 8 years and older and persons with underdeveloped physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a the product safe way and the hazards involved.
Children between 3 and 8 years are allowed to put and take out food to/from the cooler product.
Electrical products are dangerous for children and pets. Children and pets must not play with, climb on, or enter the product.
Cleaning and user maintenance should not be performed by children unless there is someone overseeing them.
Keep the packaging materials away from children. Risk of injury and suffocation.
Before disposing of old products that shall not be used any more:
1. Unplug the power cord from the mains socket.
2. Cut the power cord and remove it from the appliance together with the plug.
3. Do not remove the racks and drawers from the product to prevent children from getting inside the appliance.
4. Remove the doors.
5. Store the product so that it shall not be tipped over.
6. Do not allow children to play with the scrapped product.
Do not dispose of the product by throwing it into fire. Risk of explosion.
If there is a lock available in the product’s door, keep the key out of children’s reach.

Electrical safety

The product shall not be plugged into the outlet during installation, maintenance, cleaning, repair, and transportation operations.
If the power cord is damaged, it shall be replaced by authorized service only to avoid any risk that may occur.
Do not tuck the power cord under the product or to the rear of the product. Do not put heavy items on the power cord. The power cord should not be bent, crushed, and come into contact with any heat source.
Do not use an extension cord, multiplug or adaptor to operate your product.
Portable multi sockets or portable power supplies may overheat and cause fire. Thus, do not have a multiplug behind or in the vicinity of the product.
The plug shall be easily accessible. If this is not possible, a mechanism that meets the electrical legislation and that disconnects all terminals from the mains (fuse, switch, main switch, etc.) shall be available on the electrical installation.
Do not touch the plug with wet hands.
When unplugging the appliance, don’t hold the power cord, but the plug.

Handling Safety

This product is heavy, do not handle it by yourself.
Do not hold the product from its door while handling the product.
Be careful not to damage the cooling system and the pipes while handling the product. Do not operate the product if the pipes are damaged, and contact an authorized service.

Installation Safety

Contact the Authorized Service for the product’s installation. To prepare the product for installation, see the information in the user guide and make sure the electric and water utilities are as required. If the installation is not suitable, call a qualified electrician and plumber to have them make the necessary arrangements. Otherwise, electric shock, fire, issues with the product or injuries may occur.
Check for any damage on the product before installing it. Do not have the product installed if it is damaged.
Place the product on a level and hard surface and balance with the adjustable legs. Otherwise, the refrigerator may tip over and cause injuries.
The product shall be installed in a dry and ventilated environment. Do not keep carpets, rugs or similar floor covers under the product. This may cause risk of fire as a result of inadequate ventilation!
Do not block or cover ventilation holes. Otherwise, power consumption may be increased and damage to your product may occur.
Do not connect the product to supply systems such as solar power supplies. Otherwise, damage to your product may occur as a result of the abrupt voltage fluctuations!
The more refrigerant a refrigerator contains, the bigger its installation room shall be. In very small rooms, a flammable gas-air mixture may occur in case of a gas leak in the cooling system. At least 1 m3 of volume is required for every 8 grams of refrigerant. The amount of refrigerant available in your product is specified in the Type Label.
The installation place of the product shall not be exposed to direct sunlight and it shall not be in the vicinity of a heat source such as stoves, radiators, etc.
If you cannot prevent the installation of the product in the vicinity of a heat source, you shall use a suitable insulation plate and the minimum distance to the heat source shall be as specified below.
- At least 30 cm away from heat sources such as stoves, heating units, heaters, etc.,
- And at least 5 cm away from electric ovens.
Your product has the protection class of I. Plug the product in a grounded socket that conforms with the Voltage, Current, and Frequency values specified in the type label. The socket-outlet shall be equipped with a fuse with a rating of 10 A – 16 A. Our company shall not be responsible for the damages that shall be incurred as a result of operating the product without ensuring ground and electrical connections are made as per local or national regulations.
The product’s power cable must be unplugged during installation. Otherwise, the risk of electric shock and injury may occur!
Do not plug the product to loose, broken, dirty, greasy sockets or sockets that have come out of their seats or sockets with a risk of water contact.
Place the power cord and hoses (if available) of the product so that they shall not cause a risk of tripping over.
Penetration of humidity to live parts or to the power cord may cause a short circuit. Thus, do not use the product in humid environments or in areas where water may splash (e.g. garage, laundry room, etc.) If the refrigerator is wet from water, unplug it and contact an authorized service.
Do not connect your refrigerator to power-saving devices. These systems are harmful for the product.

Operational safety

Do not use chemical solvents on the product. These materials contain an explosion risk.
In case of a failure of the product, unplug it and do not operate until it is repaired by the authorized service. There is a risk of electric shock!
Do not place a source of flame (e.g. candles, cigarettes, etc.) on the product or in the vicinity of it.
Do not get on the product. Risk of falling and injury!
Do not cause damage to the pipes of the cooling system using sharp and piercing tools. The refrigerant that sprays out in case of puncturing the gas pipes, pipe extensions or upper surface coatings may cause irritation of skin and injuries of the eyes.
Do not place and operate electric appliances inside the refrigerators/deep freezer unless it is advised by the manufacturer.
Do not jam any parts of your hands or your body to the moving parts inside the product. Be careful to prevent the jamming of your fingers between the refrigerator and its door. Be careful while opening or closing the door if there are children around.
Do not put ice cream, ice cubes or frozen food to your mouth as soon as you take them out of the freezer. Risk of frostbite!
Do not touch the inner walls, metal parts of the freezer or food kept inside the refrigerator with wet hands. Risk of frostbite!
Do not place soda cans or cans and bottles that contain fluids that may be frozen to the freezer compartment. Cans or bottles may explode. Risk of injury and material damage!
Do not use or place materials sensitive to temperatures such as flammable sprays, flammable objects, dry ice or other chemical agents in the vicinity of the refrigerator. Risk of fire and explosion!
Do not store explosive materials such as aerosol cans with flammable materials inside the product.
Do not place cans containing fluids over the product. Splashing of water on an electrical part may cause the risk of an electric shock or a fire.
This product is not intended for storage and cooling of medicines, blood plasma, laboratory preparations or similar materials and products that are subject to the Medical Products Directive.
If the product is used against its intended purpose, it may cause damage to or deterioration of the products kept inside.
If your refrigerator is equipped with blue light, do not look at this light with optical devices. Do not stare directly at UV LED light for a long time. Ultraviolet rays may cause eye strain.
Do not fill the product with more food than its capacity. Injuries or damages may occur if the contents of the refrigerator falls when the door is opened. Similar problems may occur when an object is placed over the product.
Ensure that you have removed any ice or water that may have fallen to the floor to prevent injuries.
Change the locations of the racks/bottle racks on the door of your refrigerator while the racks are empty only. The danger of physical injury!
Do not place objects that may fall/tipped over on the product. These objects may fall while opening or closing the door and cause injuries and/or material damage.
Do not hit or exert excessive pressure on glass surfaces. Broken glass may cause injuries and/or material damage.
The cooling system in your product contains R600a refrigerant. The refrigerant type used in the product is specified in the type label.
This gas is flammable. Therefore, be careful not to damage the cooling system and the pipes while operating the product. In case of damage to the pipes;
- do not touch the product or the power cord,
- Keep the product away from potential sources of fire that may cause the product to catch fire.
- ventilation the area where the product is placed. Do not use a fan.
- Contact authorized service.
If the product is damaged and you observe gas leak, please stay away from the gas. Gas may cause frostbite if it contacts your skin.

Maintenance and cleaning safety

Do not pull by the door handle if you shall move the product for cleaning purposes. The handle may cause injuries if it is pulled too hard.
Do not clean the product by spraying or pouring water on the product and inside the product. Risk of electric shock and fire.
Do not use sharp or abrasive tools to clean the product. Do not use materials such as household cleaning agents, detergents, gas, gasoline, alcohol, wax, etc.
Use cleaning and maintenance agents that are not harmful for food only inside the product.
Do not use steam or steamed cleaning materials for cleaning the product and thawing the ice inside it. Steam contacts the live areas in your refrigerator and causes short circuit or electric shock!
Take care to keep water away from the electronic circuits or lighting of the product.
Use a clean, dry cloth to wipe the dust or foreign material on the tips of the plugs. Do not use a wet or damp piece of cloth to clean the plug. Otherwise, risk of fire or electric shock may occur.

HomeWhiz

(May not be applicable for all models)

Follow the safety warnings even if you are away from the product while operating the product via the HomeWhiz app. Also, pay attention to the warnings in the app.

Lighting
(May not be applicable for all models)

Contact an authorized service when you shall replace the LED/bulb used for lighting.

Compliance with the WEEE Directive and Disposing of the Waste Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed of with other household wastes at the end of its service life. Used devices must be returned to official collection point for the recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs an important role in recovering and recycling of old appliances. Appropriate disposal of used appliances helps prevent potential negative consequences for the environment and human health.

Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information
The packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Your Refrigerator

Cylinda-KFS6180NEE-Side-by-Side-Refrigerator-fig-1

Freezer compartment
Cooler compartment
Cooler compartment door shelves
Egg Holder
Water dispenser filling tank
Water dispenser reservoir
Bottle shelf
Adjustable stands
Crispers
The dairy (cold storage) bin
Bottle shelf
Glass shelves
Fan
Frozen food storage compartments
Freezer compartment glass shelf
Icematic
Freezer compartment door shelves

May not be available in all models

Installation

The right place for installation

Read the “Safety Instructions” section first

Your product requires adequate air circulation to function efficiently. If the product will be placed in an alcove, remember to leave at least 5 cm clearance between the product and the ceiling, rear wall, and side walls.

If the product will be placed in an alcove, remember to leave at least 5 cm clearance between the product and the ceiling, rear wall, and side walls. Check if the rear wall clearance protection component is present at its location (if provided with the product). If the component is not available, or if it is lost or fallen, position the product so that at
least 5 cm clearance shall be left between the rear surface of the product and the wall of the room. The clearance at the rear is important for the efficient operation of the product.

WARNING:

Do not use an extension or multi sockets in the power connection.
The manufacturer assumes no responsibility for any damage caused by the work carried out by unauthorized persons.
The product’s power cable must be unplugged during installation. Failure to do so may result in death or serious injuries!

WARNING: If the door span is too narrow for the product to pass, remove the door and turn the product sideways; if this does not work, contact the authorized service.

Attaching the plastic wedges
Use the plastic wedges provided with the product to provide sufficient space for air circulation between the product and the wall.

To attach the wedges, remove the screws on the product and use the screws provided with the wedges.
Attach 2 plastic wedges on the ventilation cover as shown in the figure.

In order to adjust the doors vertically,

Loosen the fixing nut at the bottom
Screw adjusting nut (CW/CCW) according to the position of the door
Tighten the fixing nut for the final position

In order to adjust the doors horizontally,

Loosen the fixing screw at the bottom
Loosen the fixing bolt on the top
Screw the adjusting bolt (CW/CCW) on the side according to the position of the door
Tighten the fixing bolt on the top for the final position
Tighten the fixing screw at the bottom

Positioning
This appliance should be installed in a dry, well-ventilated indoor position. This appliance is intended to be used at ambient temperatures ranging from 10°C to 43°C.

Adjustment of the feet
If the product is not in a balanced position, adjust the front adjustable stands by rotating right or left. Cylinda-KFS6180NEE-Side-by-Side-
Refrigerator-fig-4 Cylinda-KFS6180NEE-Side-by-
Side-Refrigerator-fig-5

Electrical connection

WARNING:

Do not use an extension or multi sockets in the power connection.
The damaged power cable must be replaced by Authorized Service.
Our firm will not assume responsibility for any damages due to usage without earthing and power connection in compliance with national regulations.
The power cable plug must be easily accessible after installation.

Hot surface warning!
The side walls of your product are equipped with cooler pipes to enhance the cooling system. High-pressure fluid may flow through these surfaces, and cause hot surfaces on the side walls. This is normal and it does not require servicing. Be careful when you contact these areas.

Preparation

Read the “Safety Instructions” section first!

What to do for energy saving
Connecting the product to electronic energy-saving systems is harmful, as it may damage the product.

For a freestanding appliance; ‘this refrigerating appliance is not intended to be used as a built-in appliance’ ;
Do not keep the refrigerator doors open for long periods.
Do not place hot food or beverages into the refrigerator.
Do not overfill the refrigerator; blocking the internal air flow will reduce cooling capacity.
Depending on the product’s features; defrosting frozen foods in the cooler compartment will ensure energy saving and preserve food quality.
Food shall be stored using the drawers in the cooler compartment in order to ensure energy saving and protect food in better conditions.
Make sure the foods are not in contact with the cooler compartment temperature sensor described below.
Since hot and humid air will not directly penetrate into your product when the doors are not opened, your product will optimize itself in conditions sufficient to protect your food. In this energy-saving function, functions and components such as compressor, fan, heater, defrost, lighting, display, and so on will operate according to the needs to consume minimum energy while maintaining the freshness of your foodstuff.
In case of multiple options are present glass shelves must be placed so that the air outlets at the back wall are not blocked, preferably air outlets are remaining below the glass shelf. This combination may help improve air distribution and energy efficiency.

First operation
Before using your refrigerator, make sure the necessary preparations are made in line with the instructions in the “Safety and environment instructions” and “Installation” sections.

Keep the product running without placing any food inside for 12 hours and do not open the door, unless absolutely necessary.
A sound will be heard when the compressor is engaged. It is normal to hear the sound even when the compressor is inactive, due to the compressed liquids and gasses in the cooling system.
It is normal for the front edges of the refrigerator to be warm. These areas are designed to warm up in order to prevent condensation.
For some models, the indicator panel turns off automatically 1 minute after the door closes. It will be reactivated when the door is open or any button is pressed.

Operating the Product

Read the “Safety Instructions” section first!

Do not use any mechanical tools or any other tools than the recommendations of the manufacturer to speed up the thawing operation.
Do not use parts of your refrigerator such as the door or drawers as a support or a step. This may cause the product to trip over or its components to be damaged.
The product shall be used for storing food only.
Turn off the water valve if you will be away from home (e.g. on the vacation) and you will not be using the Ice Maker or the water dispenser for a long period of time. Otherwise, water leaks may occur.

Turning off the product
lf you shall not be using the product for a long period;

unplug it,
remove the food to prevent odors,
wait until the ice is thawed,
clean the inside and wait until it is dried.
leave the doors open to prevent damage to internal body plastics.

Read the “Safety Instructions” section first!

Indicator panel
Indicator panels may vary depending on the model of your product. Audial and visual functions of the indicator panel will assist in using the refrigerator . Cylinda-KFS6180NEE-Side-by-Side-Refrigerator-fig-8

Key lock
High temperature/error warning
Energy Saving (Display Off) Indicator
Freezing Compartment Temperature Setting Key
Cooling Compartment Temperature Setting Key
Quick Freeze Function Button
Quick Fridge Function Button
Cooling Compartment Vacation Function Key

Using the product

Key lock
When the key lock key is pressed for 3 seconds, the key lock is activated and the LED on the key is illuminated. Press the key for 3 seconds again to cancel the key lock.
You may use the key lock feature when you want to prevent changes to the temperature setting of the refrigerator.
High temperature/error warning
This indicator ( ) shall be active when your refrigerator cannot perform adequate cooling or in case of any sensor error. “E” shall be displayed on the Freezing Compartment temperature indicator and figures such as 1,2,3… shall be displayed on the cooling compartment temperature indicator. These figures provide information to the authorized service on the error that has occurred. An exclamation mark may be displayed when you load warm food to the freezing compartment or keep the door open for a long period of time. This is not a fault, this warning shall be removed when the food is cooled down or when any key is pressed.
Energy Saving (Display Off) Indicator
Energy saving function is enabled automatically and the energy-saving symbol is displayed when the door of the product is not opened or closed for some period of time. When the energy-saving function is active, all symbols on the screen other than the energy-saving symbol shall be turned off. When the energy-saving function is active, pressing any key or opening the door will deactivate the energy-saving function and the display signals
will return to normal. The energy-saving function is a function activated ex- factory and cannot be canceled.
Freezing Compartment Temperature Setting Key
Adjust the temperature setting for the cooling compartment When the key is pressed, the temperature of the freezing compartment can be set at -18, -19, -20, -21, -22, -23, -24 Celsius.
Cooling Compartment Temperature Setting Key
Using the Cooling Compartment Temperature Setting Key, you can adjust the temperature of the freezing compartment. Pressing this key will enable the cooling compartment temperature to be set at 8,7,6,5,4,3,2 and 1 Celcius.
Quick Freeze Function Button
When the quick freeze key is pressed, the LED on the key is illuminated and the quick freeze function shall be activated. The freezing compartment temperature is set to -27 Celcius. Press the key again to cancel the function. The quick freezing function shall be automatically canceled after 24 hours. To freeze a large amount of fresh food, press the quick freeze key before placing the food in the freezer compartment.
Quick Fridge Function Button
When you press the Quick Fridge button, the temperature of the compartment will be colder than the adjusted values. This function can be used for food required to be cooled down rapidly in the fridge compartment. If you want to cool large amounts of fresh food, it is recommended to activate this function before putting the food into the fridge. The quick Fridge indicator is illuminated when the Quick Fridge function is active. To cancel this function, press the Quick Fridge button again. The quick Fridge indicator will turn off and return to its normal settings. If you do not cancel it, the Quick Fridge function will cancel itself automatically after 1 hour or when the fridge compartment reaches the required temperature.
This function is not recalled when power restores after a power failure.
Cooling Compartment Vacation Function Key
Press the key for 3 seconds to activate the vacation function. Vacation mode is activated and the LED on the key is illuminated. “- -” is displayed on the Cooling Compartment temperature indicator and the cooling compartment does not actively perform cooling. Do not keep your food in the cooling compartment when this function is activated. The other compartments continue to cool according to the set temperatures. Press the key for 3 seconds again to cancel this function.

Deodoriser Module

May not be available in all models
The deodorizer module quickly eliminates the bad smells in your refrigerator before they permeate the surfaces. Thanks to this module, which is placed on the ceiling of the fresh food compartment, the bad odors dissolve while the air is actively being passed on the odor filter, then the air that has been cleaned by the filter is re-emitted to the fresh food compartment. This way, the unwanted odors that may emerge during the storage of foods in the refrigerator are eliminated before they permeate the surfaces. This is achieved thanks to the fan, LED, and odor filter integrated into the module. When you want to use the deodorizer module, please activate it from the indicator button.

Blue light

May not be available in all models
Fruits and vegetables stored in the crispers that are illuminated with a blue light continue their photosynthesis by means of the wavelength effect of blue light and thus preserve their vitamin content.

Humidity-controlled crisper

May not be available in all models
Thanks to the humidity-controlled crisper, vegetables and fruits may be stored for a longer period at an environment with ideal humidity conditions. With the humidity setting system with 3 options in front of your crisper, you may control the humidity inside the compartment as per the food you store. We recommend you to store your food by selecting the vegetable option when you store vegetables only, the fruit option when you store fruit only, and the mixed option when you store mixed food. We recommend that the vegetables and fruits shall not be stored in bags to improve the storage period of the food and to better benefit from the humidity control system. Leaving them in plastic bags causes vegetables to rot in a short time. We recommend that cucumbers and broccolis, in particular, are not stored in closed bags. In situations where contact with other vegetables is not preferred, use packaging materials such as paper that have a certain level of porosity in terms of hygiene.

When placing the vegetables, place heavy and hard vegetables at the bottom and light and soft ones on the top, taking into account the specific weights of the vegetables.
Do not put fruits that have a high ethylene gas production such as pear, apricot, peach, and particularly apple in the same crisper as other vegetables and fruits. The ethylene gas coming out of these fruits might cause other vegetables and fruits to mature faster and rot in a shorter period of time.

Using the water fountain

May not be available in all models

The first few glasses of water taken from the fountain will normally be warm. If the water fountain is not used for a long time, dispose of the first few glasses of water to get clean water.

Push the arm of the water fountain with your glass. It would be easier to push the arm with your hand if you are using a soft plastic glass.
Release the arm after filling your glass with water as you desire.

The amount of water flow from the fountain depends on the pressure you apply on the arm. Release the pressure on the arm slightly as the water level in your glass/container is increased to prevent overflow. Water shall drip if you press the arm slightly; this is normal and it is not a malfunction.

Filling the water tank of the water fountain
Open the lid of the water tank as shown in the figure. Fill in pure and clean drinking water. Close the lid.

Cleaning the water tank
Remove the water-filling reservoir inside the door shelf. Detach by holding both sides of the door shelf. Hold both sides of the water tank and remove at 45° angle. Remove and clean the water tank lid. Cylinda-KFS6180NEE-Side-by-
Side-Refrigerator-fig-12

Do not fill the water tank with fruit juice, fizzy beverages, alcoholic beverages or any other liquids incompatible with use in the water fountain. Using such liquids will cause malfunction and irreparable damage in the water fountain. Using the fountain in this way is not within the scope of a warranty. Such certain chemicals and additives in the beverages/liquids may cause material damage to the water tank.
The water tank and water fountain components cannot be washed with dishwashers.
The components of the water tank and water dispenser should not be washed in the dishwasher.

Dairy (cold storage) bin

May not be available in all models
“The dairy (cold storage) bin ” provides lower temperature within the refrigerator compartment. Use this bin to store delicatessen (salami, sausages, dairy products and etc. ) that requires lower storage temperature or meat, chicken or fish products for immediate consumption. Do not store fruits and vegetables inside this bin.

Crisper
The refrigerator’s vegetable bin is designed to keep crispers fresh by preserving humidity. For this purpose, the overall cold air circulation is intensified in the crisper bin. Keep fruits and vegetables in this compartment. Keep the green-leaved crispers and fruits separately to prolong their life.

Ionizer

May not be available in all models
The ionizer system in the cooler compartment’s air duct serves to ionize the air. The negative ion emissions will eliminate bacteria and other molecules causing odour in the air.

Odour filter

May not be available in all models
The odour filter in the cooler compartment’s air duct will prevent undesirable odour formation.

Icematic and ice storage box

May not be available in all models
Fill the icematic with water and put in place. The ice will be ready after approximately two hours. Do not remove the icematic to take the ice. Turn the buttons on the ice chamber’s right-hand side by 90°; the ice will fall to the ice storage box below. You may then remove the ice storage box and serve the ice.

The ice storage box is intended for storing ice only. Do not fill with water. Doing so will cause it to break.
In products with automatic ice machines, you might hear a sound when pouring the ice. This sound is normal and is not a sign of failure.

Freezing fresh food

To preserve food quality, the food items placed in the freezer compartment must be frozen as quickly as possible, use rapid freezing for this.
To freeze a large amount of fresh food, press the rapid freeze button 24 hours before placing the food in the freezer compartment.
Freezing the food items when fresh will extend the storage time in the freezer compartment.
Pack the food items in air-tight packs and seal them tightly.
Make sure the food items are packed before putting in the freezer. Use freezer holders, tinfoil and damp-proof paper, plastic bag or similar packaging materials instead of traditional packaging paper.
Mark each food pack by writing the date on the package before freezing. This will allow you to determine the freshness of each pack every time the freezer is opened. Keep the earlier food items in the front to ensure they are used first.
Frozen food items must be used immediately after defrosting and should not be frozen again.
Do not free large quantities of food at once.

Recommendations for storing frozen foods
The compartment must be set to at least -18°C.

Place the food items in the freezer as quickly as possible to avoid defrosting.
Before freezing, check the “Expiry Date” on the package to make sure it is not expired.
Make sure the food’s packaging is not damaged.

Deep freezer details
As per the IEC 62552 standards, the freezer must have the capacity to freeze 4,5 kg of food items at -18°C or lower temperatures in 24 hours for every 100 liters of freezer compartment volume. Food items can only be preserved for extended periods at or below the temperature of -18°C. You can keep the foods fresh for months (in a deep freezer at or below temperatures of 18°C ). The food items to be frozen must not contact the already-frozen food inside to avoid partial defrosting.

Boil the vegetables and filter the water to extend the frozen storage time. Place the food in air-tight packages after filtering and place in the freezer. Bananas, tomatoes, lettuce, celery, boiled eggs, potatoes and similar food items should not be frozen. Freezing these food items will simply reduce the nutritional value and food quality,
as well as possible spoiling which is harmful to health.

Placing the food

Freezer compartment shelves Various frozen goods including meat, fish, ice cream, vegetables etc.
Cooler compartment shelves Food items inside pots, capped plate and capped cases, eggs (in capped case)
Cooler compartment door shelves Small and packed food or beverages
Vegetable bin Fruits and vegetables
Fresh food compartment Delicatessen (breakfast food, meat products to be consumed in short notice)

Door open alert

May not be available in all models
An audible alert will be heard if the product’s door remains open for 1,5 minutes. The audible alert will stop when the door is closed or any button on the display (if available) is pressed.

Illumination lamp
The interior light uses a LED-type lamp. Contact the authorized service for any problems with this lamp. The lamp (s) used in this appliance cannot be used for house lighting. The intended use of this lamp is to help the user place food into the refrigerator/freezer safely and comfortably.

Maintenance and cleaning

WARNING: Read the “Safety Instructions” section first! Unplug the refrigerator before cleaning it.

Do not use sharp or abrasive tools to clean the product. Do not use materials such as household cleaning agents, soap, detergents, gas, gasoline, alcohol, wax, etc.
The dust shall be removed from the ventilation grill on the rear of the product at least once a year (without opening the cover). Cleaning shall be performed with a dry cloth.
Take care to keep water away from the lamp’s cover and other electrical parts.
Clean the door with a damp cloth. Remove all contents to remove the door and body racks. Remove the door racks by lifting them upwards. Clean and dry the shelves, then attach them back in place by sliding them from above.
Do not use chlorinated water or cleaning products on the exterior surface and chrome-coated parts of the product. Chlorine will cause rust on such metallic surfaces.
Do not use sharp and abrasive tools, soap, house cleaning materials, detergents, gas, gasoline, varnish, and similar substances to prevent the deformation of the plastic part and removal of prints on the part. Use warm water and a soft cloth for cleaning, and then dry it.
On the products without a No-Frost feature, water droplets and icing up to a thickness of a finger may occur on the rear wall of the freezer compartment. Do not clean, and never apply oils or similar materials.
Use a mildly dampened microfiber cloth to clean the external surface of the product. Sponges and other types of cleaning clothes may cause scratches.
To clean all removable components during the cleaning of the interior surface of the product, wash these components with a mild solution consisting of soap, water, and carbonate. Wash and dry thoroughly. Prevent contact of water with illumination components and the control panel.

CAUTION:
Do not use vinegar, rubbing alcohol or other alcohol-based cleaning agents on any interior surface.

Stainless Steel External Surfaces
Use a non-abrasive stainless steel cleaning agent and apply it with a soft lint-free cloth. To polish, gently wipe the surface with a micro-fiber cloth dampened with water and use dry polishing chamois. Always follow the veins of the stainless steel.

Cleaning of the Products with Glass Doors
Remove the protective foil on the glasses. There is a coating on the surface of the glasses. This coating minimizes the formation of stains and provides easy cleaning of the stains and dirt that have been formed. Glass that is not protected by coating may be exposed to a permanent bonding of organic or inorganic, air and water-based contaminants such as limestone, mineral salts, unburned hydrocarbons, metal oxides, and silicones, which cause staining and physical damage easily in a short period of time. Keeping the glasses clean becomes very difficult, if not impossible, despite the fact they are cleaned regularly. As a result, the transparency and appearance of the glass deteriorate. Hard and abrasive cleaning methods and agents further increase these defects and accelerate the process of deterioration.

For routine cleaning processes, non-alkaline and non-corrosive water-based cleaning products shall be used. In order to have a longer service life of this coating, alkaline and corrosive substances shall not be used during cleaning.

A tempering process is applied to increase the resistance of these glasses against impacts and breakage.
As an additional safety precaution, a safety film has been applied to the rear surface of these glasses to prevent harm to the environment in case it breaks.

Preventing Odours
The product is manufactured free of any odorous materials. However, keeping the food in inappropriate sections and improper cleaning of internal surfaces may lead to odours.
To avoid this, clean the inside with carbonated water every 15 days.

Keep the foods in sealed holders. Microorganisms may spread out of unsealed food items and cause malodour.
Do not keep expired and spoilt foods in the refrigerator.

Tea is one of the most effective odour removers. Place the pulp of the brewed tea in the product inside an open container and remove it after 12 hours at the latest. If you keep the tea pulp inside the product for longer than 12 hours, it will collect the organisms that cause the odour so it can be the source of odour itself.

Protecting Plastic Surfaces
Oil spilled on plastic surfaces may damage the surface and must be cleaned immediately with warm water.

Troubleshooting

Check this list before contacting the service. Doing so will save you time and money. This list includes frequent complaints that are not related to faulty workmanship or materials. Certain features mentioned herein may not apply to your product.

The refrigerator is not working.

The power plug is not fully settled. >>> Plug it in to settle completely into the socket.
The fuse connected to the socket powering the product or the main fuse is blown. >>> Check the fuse.

Condensation on the side wall of the cooler compartment (MULTI ZONE, COOL, CONTROL and FLEXI ZONE).

The door is opened too frequently >>> Take care not to open the product’s door too frequently.
The environment is too humid. >>> Do not install the product in humid environments.
Foods containing liquids are kept in unsealed holders. >>> Keep the foods containing liquids in sealed holders.
The product’s door is left open. >>> Do not keep the product’s door open for long periods.
The thermostat is set to a very cool
temperature. >>> Set the thermostat to an appropriate temperature.

Compressor is not working

In case of sudden power failure or pulling the power plug off and putting back on, the gas pressure in the product’s cooling system is not balanced, which triggers the compressor thermic safeguard. The product will restart after approximately 6 minutes. If the product does not restart after this period, contact the service.
Defrosting is active. >>> This is normal for a fully-automatic defrosting product. The defrosting is carried out periodically.
The product is not plugged in. >>> Make sure the power cord is plugged in.
The temperature setting is incorrect. >>> Select the appropriate temperature setting.
The power is out. >>> The product will continue to operate normally once the power is restored.

The refrigerator’s operating noise is increasing while in use

The product’s operating performance may vary depending on the ambient temperature variations. This is normal and not a malfunction.

The refrigerator runs too often or for too long

The new product may be larger than the previous one. Larger products will run for longer periods.
The room temperature may be high. >>> The product will normally run for long periods in higher room temperatures.
The product may have been recently plugged in or a new food item is placed inside. >>> The product will take longer to reach the set temperature when recently plugged in or a new food item is placed inside. This is normal.
Large quantities of hot food may have been recently placed into the product. >>> Do not place hot food into the product.
The doors were opened frequently or kept open for long periods. >>> The warm air moving inside will cause the product to run longer. Do not open the doors too frequently.
The freezer or cooler door may be ajar. >>> Check that the doors are fully closed.
The product may be set to a temperature too low. >>> Set the temperature to a higher degree and wait for the product to reach the adjusted temperature.
The cooler or freezer door washer may be dirty, worn out, broken or not properly settled. >>> Clean or replace the gasket. A damaged/torn door washer will cause the product to run for longer periods to preserve the current temperature.

The freezer temperature is very low, but the cooler temperature is adequate

The freezer compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.

The cooler temperature is very low, but the freezer temperature is adequate

The cooler compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.

The food items kept in cooler compartment drawers are frozen

The cooler compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.

The temperature in the cooler or the freezer is too high

The cooler compartment temperature is set to a very high degree. >>> Temperature setting of the cooler compartment has an effect on the temperature in the freezer compartment. Wait until the temperature of relevant parts reaches a sufficient level by changing the temperature of the cooler or freezer compartments.
The doors were opened frequently or kept open for long periods. >>> Do not open the doors too frequently.
The door may be ajar. >>> Fully close the door.
The product may have been recently plugged in or a new food item is placed inside. >>> This is normal. The product will take longer to reach the set temperature when recently plugged in or a new food item is placed inside.
Large quantities of hot food may have been recently placed into the product. >>> Do not place hot food into the product.

Shaking or noise

The ground is not level or durable. >>> If the product is shaking when moved slowly, adjust the stands to balance the product. Also make sure the ground is sufficiently durable to bear the product.
Any items placed on the product may cause noise. >>> Remove any items placed on the product.

The product is making noise of liquid flowing, spraying etc

The product’s operating principles involve liquid and gas flows. >>> This is normal and not a malfunction.

There is sound of wind blowing coming from the product

The product uses a fan for the cooling process. This is normal and not a malfunction.

There is condensation on the product’s internal walls

Hot or humid weather will increase icing and condensation. This is normal and not a malfunction.
The doors were opened frequently or kept open for long periods. >>> Do not open the doors too frequently; if open, close the door.
The door may be ajar. >>> Fully close the door.

There is condensation on the product’s exterior or between the doors

The ambient weather may be humid, this is quite normal in humid weather. >>> The condensation will dissipate when the humidity is reduced.

The interior smells bad

The product is not cleaned regularly. >>> Clean the interior regularly using sponge, warm water and carbonated water.
Certain holders and packaging materials may cause odour. >>> Use holders and packaging materials without free of odour.
The foods were placed in unsealed holders. >>> Keep the foods in sealed holders. Micro-organisms may spread out of unsealed food items and cause malodour.
Remove any expired or spoilt foods from the product.

The door is not closing

Food packages may be blocking the door. >>> Relocate any items blocking the doors.
The product is not standing in full upright position on the ground. >>> Adjust the stands to balance the product.
The ground is not level or durable. >>> Make sure the ground is level and sufficiently durable to bear the product.

The crisper is jammed.

The food items may be in contact with the upper section of the drawer. >>> Reorganize the food items in the drawer.

In case of a Hot Surface on the Product

High temperature may be observed between two doors, on the side panels and on the rear grill area while your product is operated. This is normal and it does not require servicing!

Fan continues to operate when the door is opened

Fan may continue to operate when the freezer door is open.

WARNING:
If the problem persists after following the instructions in this section, contact your vendor or an Authorized Service. Do not try to repair the product.

www.cylinda.se.