Kernelly

Wireless Earbuds Bluetooth 5.0 Headphones

Specifications

• MODEL NUMBER: JS36
• BT VERSION: 5.0
• TRANSMITTING DISTANCE: 10m/33ft
• FREQUENCY RANGE: 40-20KHz
• SENSITIVITY: 106±3dB
• IMPEDANCE: 32Ω
• MUSIC PLAYTIME: about 4 hours (depends on music volume)
• CHARGING TIME: about 1 hour
• COLOR: Black/White
• PACKAGE WEIGHT: 75g/2.18oz
• FEATURES: Adjustable
• BRAND: Kernelly

Introduction

It has High data transmission speeds, a steady and quick connection, and minimal power consumption are all features of BT 5.0. it is Lightweight and small in size, they comfortably fit into your ear canal. It is Sweatproof, so you can enjoy music and activities without worrying about splashing water and sweat. The earphones may be charged and stored in a charging case. The remaining power can be displayed on a digital display. Touch control is supported. Music and phone calls are simple to control.

PACKAGE LIST

• 1 * Pair of Earbuds
• 1 * Charging Cable
• 1 * User Manual (English)
• 1 * Charging Case

HOW TO SETUP

• To begin, go to Settings…
• Then select Connections.
• Then select Bluetooth…
• Then, in the top-right corner of your screen, tap Scan.
• Then, on your headphones, hit and hold the power button.
• Finally, locate and tap your headphones.

HOW TO CONNECT

• Place your earbuds in pairing mode. The first step is to put your earbuds in pairing mode.
• On your phone, go to Settings – Bluetooth.
• Scan the Bluetooth category for new gadgets….
• Connect your device by selecting it…
• Play your preferred music.

HOW TO INSTALL

In both ears, place the headset (earbud) pieces. Place the (left) marked unit in your left ear and the (right) marked unit in your right ear. A tactile dot is present on the left unit. To slide the earbud tip deep into your ear, twist the headset (earbud).

HOW TO ADJUST THE VOLUME

What is the best way to control the volume on my TWS 5.0 earbuds? The Creative Outlier Air TWS earbuds provide direct volume control, which is simple to use. Turn down the volume by pressing and holding the left earpiece. Turn up the volume by pressing and holding the right earbud.

HOW TO CHARGE

You may charge your headphones with a USB cable; connect to charge, and when the case is fully charged, a light will appear; then, place your earbuds in the case, and the earbuds will begin charging.

Frequently Asked Questions

• How do you make both wireless earbuds function simultaneously?
  The two Bluetooth headsets must be paired at the same time; otherwise, only one will pair.
  Push both buttons until a blue flashing light appears (don’t stop pressing when alternating blue/red lights appear).
  Open Bluetooth on your phone and search for two-k2, then select one of them to pair.

• When my wireless earphones are fully charged, how do I know?
  When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged.

• What is the best way to increase the volume of my Bluetooth earbuds?
  Volume control is available on the majority of wireless earphones. This is usually accomplished with a smart touch feature that allows you to adjust the volume by tapping either side of the earbuds.

• Why aren’t my earbuds communicating with one another?
  Turn off your device’s Bluetooth option. Remove the earbuds from the casing and they will automatically turn on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: Try it again if it doesn’t work the first time.

• How do earbuds function?
  The sound goes through wires that connect to the speaker if you’re using wired earbuds. A wire coil, magnet, and cone make up the speaker itself. These parts are held together by the device’s casing. Many individuals today, of course, utilize wireless earphones.

• On Bluetooth headphones, where is the power button?
  You’re referring to the middle of the “three.” It’s fantastic because everything is on the same side. If you want to connect to your phone, the center button also serves as a “answer and hang-up” button.

• Why won’t my earbuds charge?
  The most likely cause is a problem with your cable or USB port. Your Bluetooth headphones are not charging because the USB cable is damaged or the USB is put incorrectly. Make sure your USB is fully inserted in both the power supply and the headphones.

• When charging earbuds, how long does it take?
  The earphones take around 2 hours to fully charge. If the battery is low, charging it in the charging case for 10 to 20 minutes can give you an extra hour of use.

• Should we preserve our earbuds in case they become damaged while charging?
  Lithium-ion batteries are used in almost all wireless earbuds, and they are engineered to stop charging once they are fully charged. Your earphones will be protected from harsh temperatures, moisture, and even dust if you keep them in the case.

• Why are my wireless earbuds only working on one side?
  Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>