Shenzhen Taihuaxin Technology A9R9890 3-In-1 Foldable Wireless Charger User Manual
- June 5, 2024
- Shenzhen Taihuaxin Technology
Table of Contents
User Manual
3 IN 1 FOLDABLE WIRELESS CHARGER
Product Appearance
Product Introduction
Thanks for purchasing the multi‐functional wireless charger. The 3‐in‐1 Wireless Charger adopts a high‐end fast charge IC, with its luxury and portable design. It can provide 3 compact charging stations, powered by only one outlet. Also, it can support mobile phones/earbuds/Apple Watch. The charger will start automatically when devices are placed on it. It can support any cell phone with QI standards. This charger is space‐saving designed, which will make your space clean and tidy. All these can help you integrate your electronic equipment and life very well.
Operation Steps
- Connect the charger to a 9V/2.5A QC3.0 adapter through a Type‐C quick charge cable to power on
- Put the phone on the charger
- Put the apple watch on and suck it up to charge(Better loosening of the strap)
- Put the charging case of your earbuds on the charger
Product Specification
Input: 9V/2.5A
Phone Output: 15W/10W/7.5W/5W
Watch Output: 2.5W
Earbuds Output: 5W
Input Interface: Type‐C port
Size:11.3cm7.5cm14.0cm
Weight:266g
Accessories List:Wireless Charger1, Type‐C quick charge cable1,
Adapter*1,User manual”1
LED Indicator Status
Power On| The red light keeps on
On Charging| Green breathing light
Full Charge| The green light keeps on
Error| The Red&Green lights flashed alternately
Attention
- Do not squeeze or collide.
- Please keep the charger away from fire, water, and other liquid.
- Do not use a near magnetic bank card or IC card to avoid malfunctioning.
- Do not use the wireless charger in an extremely hot, humid, or corrosive environment.
- f you need to clean the charger, please make sure it is not connected to the power source.
Notice: To ensure charging 3 devices safely and efficiently, you must use a 9V2.5A adapter and quick charge cable! (if you don’t use the appropriate adapter and cable, the thechargermaynot charge the phone, or may not charge the 3 devices simultaneously, or may even damage the charger).
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
FCC Warning
This device complies with Part 18 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Refer to CC Part 18.213(c):
(a) Max. Electric Field Emissions: 5.6782V/m
Max. Magnetic Field Emissions: 0.6301V/m
(b) The maintenance of the system is the responsibility of the manufacturer.
(c) To prevent interference, the product should be as far away from devices
operating at the same frequency as possible.
(d) Manufacturers of RF lighting devices must provide an advisory statement,
either on the product packaging or with other user documentation, similar to
the following: This product may cause interference to radio equipment and
should not be installed near maritime safety communications equipment or other
critical navigation or communication equipment operating between 0.45-30 MHz.
Variations of this language are permitted provided all the points of the
statement are addressed and may be presented in any legible font or text
style.