Intro Union Electronics 2MNCA0117B0A2 Car FM Transmitter Owner’s Manual
- June 5, 2024
- Intro Union Electronics
Table of Contents
Intro Union Electronics 2MNCA0117B0A2 Car FM Transmitter
Safety Instructions
- Please read this manual carefully before using
- Keep these instructions
- Do not disassemble
- Do not expose directly to sunlight or open flame
- Pay attention to the road and do not operate this product while driving
Introduction Features
- Input 12-24V
- 177 inch TFT color display
- FM transmitter: 881-107.9 MHz range
- Bluetooth hands-free calls
- Stream music from smartphone to car audio
- system via FM transmission
- USB charge ports:
- Type-C: PD 3.0 Suitable for iPhone 24 W quick charging
- 5V/2.4A: Max 2.4A/5V smart charging
- Supports SD card streaming
- USB lash drive
- Supports 3.5mm AUX-in and AUX-output
- Car battery monitor
- PD3.0 charging port.
- 5V/2.4A smart charging port.
- AUX port.
- CH: press and enter into FM frequency change mode.
- Previous song.
- Microphone.
- TFT colorful display
- TF card slot
- USB flash drive port.
- Next song.
- M: menu button.
- Multifunction Knob button:
change frequency /Volume
&/Answer&End Calls
How to Setup
-
plug 2MNCAO117BOA2 into your car cigarette lighter socket If the FM Transmitter doesn’t automatically power up. simply push the myltifunction control button
(12)to turn on -
LED screen will illuminate when power is on.
-
Bluetooth icon will blink, signaling it is in pairing mode. Go to your smartphone’s Bluetooth settings and select MNCA0117 to connect. Once your device is paired. you will hear the prompt Bluetooth connected successfully”
-
Turn on your car’s FM radio, and find a vacant (only static noise) channel. Adjust the frequency on 2MNCAO117BOA2 to match the frequency on your car radio.
-
To adjust the FM transmitter frequency Press “CH” button until the frequency display starts blinking, turn the hd multifunction control button to adjust the FM frequency to match the frequency on your car radio.
Play music
Play music on your phone After Setup steps 1-6. you can start playing audio on
your smartphone, the music will stream using Bluetooth from your phone via FM
transmission to your car speakers using your car’s radio.
Volume display mode
Turn the multifunctional control button to adjust the volume
Play music from SD cards
Insert the SD card into the card port. 2MNCAO117BOA2 will start playing
automatically.
Screen functions
Menu Settings
Under SD card USB playing status, press and hold “M” button until the
directory list shows up
The enhanced sound effect is easy to adjust on this product,
- Treble: press the TRE button to enter into the below interface, and rotate the knob button to switch treble sound effects from-5 to 5,10 levels available.
- Bass: press the bass button to enter into the below interface, and rotate the knob button to switch treble sound effects from-5 to 5, 10 levels available.
Stream your smartphone’s music using your car’s AUX port:
if you can t find empty channels on your cars radio. you can use a 35mm AUX
cable to connect 2MNCAO117BOA2 to your car’s AUX input port Make sure you
adjust your car radio to AUX setting. Your phone’s audio will now play through
your car’s speakers (AUX cable not included).
Once your phone is paired to 2MNCAO117BOA2 you’ll
be able to answer calls, hands-free!
2MNCAO117BOA2 wireless FM transmitter features two
USB ports: Type-C: PD 3.0 Suitable for iPhone 24 Quick charging 5V/2.4A smart
charging port: provides allowed max input current to your devices.
Specifications
- DC input: 12-24V
- Type-C: PD 3.0 Suitable for iPhone 20W
- quick charging
- Bluetooth: V5.0
- Audio format: MP3. WMA, FACL,APE. WAV
- FM transmission distance: >2M
- USB capacity support: <64GB
- Working temperature range: -20’C to 40’C
- Storage temperature range: -40°C to 85C
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following
measures:
- -Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be installed and operated with minimum distance between 20cm the radiator your body.