NuEyes Pro Visionary Design Restore Sight User Guide

NuEyes Pro Visionary Design Restore Sight User Guide

READ THESE INSTRUCTIONS IN ORDER

1. Master one section at a time.
2. All “left/right” directions are how you would reach up to the head set when it’s on your head.
3. Put the goggles on before turning it on. It will be totally dark. It can sense position. It goes to sleep when you take it off for even a few seconds to save the battery. After you get to know how that works, it doesn’t matter if it’s on your head or off as you power up.
4. You can adjust the side straps with the tabs on either side of your head. If you need the top strap longer, pull one side of the loose end of the inside strap to release a rubber button.

SECTION ONE

ORIENTATION TO Buttons

1. Power Button: under right corner near the front edge.
   Note: The other tactile marking under the right side is just to mark the charging port.
   Three buttons positioned vertically on right side:

2. Zoom In: “Button 1” top right with one tactile indicator.

3. Zoom Out: “Button 2” second one down with two tactile indicators.

4. Enter VR Mode: “Button 3” AKA “Home Button” lowest on the right side – no tactile
   indicator. It feels indented/concaved.
   Do NOT press Home Button until you master the NuEyes Mode AND read all about VR Mode in Section Two “Home Button” on head set feels indented just like the Home Button on the remote.

5.  Two buttons under left corner.

   • Contrast/Color Change: use either button to scroll through colors: Blue, Orange natural color, enhanced positive and enhanced negative.
     OR

   • Volume Up and Down: only when you’re listening to something

6. Remote: There is no “power” button on the remote. You can only activate it when you “power on” the headset. You only need it in
   VR Mode.
   Two buttons for basic use:

   • Trigger: use pointer finger to pull works as a mouse click
   • Home Button: feels indented/concaved use thumb to press

POWER UP – TO NuEyes MODE

1. After reading Section One, read through this section again before putting it on.

2. Get the controller handy. It’s optional for NuEyes Mode. But you can only sync it (activate it) while powering up.

3. On head set, push-hold power button for 2 full seconds. (under right front edge)

4. After short pause: see “NuEyes” logo, hear a jingle, see “Loading”.

5. You may see a moving blue donut and a pencil drawing of the remote. You have 10 seconds to quick press the Home Button on remote to sync the remote.

6. You may see (first time it powers up):
   “Do Not Drive or Walk With This Device”.

7. In NuEyes Mode, you may:
   Zoom-In
   Zoom-Out
   Change Color

SECTION TWO

Virtual Reality Mode (VR Mode)

Switch Between NuEyes Mode and VR Mode

1. From NuEyes Mode, quick press Home Button (either on the remote OR on the head set).
2. Each of the 3 tiles on screen represents a application.
3. To go back to NuEyes Mode: Point remote beam (blue +) at the top left tile (Blue Circle with white “e2” logo). Pull trigger to select.
4. Go to step one

Scroll Through VR Program Options

1. From NuEyes Mode, go to VR Mode: quick press “Home Button”.
2. Now practice scrolling right by clicking right carrot > on right side of 3 tiles. You’ll see 3 more tiles slide into view.
3. Scroll right till you can’t scroll right anymore (2 or 4 times).
4. The only way to exit the VR Mode:
   • Scroll all the way back to the left by using the trigger on the left carrot <.
   • Select the “e2” in the to exit. That brings you back to the NuEyes Mode AKA Real World.
5. To Exit a VR Program AND VR Mode:
   first have to quick press the Home Button to exit any VR Program – to get back to the screens of 3 tiles.

After you master Sections One and Two, You can explore virtual reality programs.

SECTION THREE

TIPS TO EXPLORE VIRTUAL REALITY

Quick Press: Brings you into VR Mode from NuEyes Mode.
OR brings you back to the VR menu options (tiles of 3 per page) if/when you enter a VR Program.

LONG Hold: Reorients VR field of view. So if you want to change your body position in the real world (i.e. quarter turn left), move your head and body position first then hold Home Button to re-center what you see.

The VR Mode will work best if you are connected to WiFi. Unfortunately, it is not a low-vision friendly process to put in a WiFi password. (We recommend you have a family/friend assist you)

A few of the tiles offer off-line experiences/games. It won’t harm the device to click on any VR Program Tile to see what’s there. Just remember: quick press the Home Button to
exit any VR Program.

The Bright Red Circle is the best way to get to the internet. It’s called Opera. You can find YouTube, Facebook and much more. BUT you have to connect to a WiFi to access the internet.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>