Haylou GT6 Earbuds Instruction Manual
- June 5, 2024
- Haylou
Table of Contents
Haylou GT6（iOS）Video
Haylou GT6 （Android）Video
How to Pair
1. Simultaneously take out both earbuds
2. Turn on Bluetooth and search for ” Haylou GT6 ” Click to complete connection.
If the connection fails, put them back into case and repeat the above operation
Re-connection
1. Put the earbuds back into the charging case to turn off and charge.
2. Open the case and take them out ( Bluetooth need to be turned on )
Seamless Switch between mono and stereo mode
After the two earbuds are successfully connected, it is stereo mode
1. Put any earbud back into the case to turn off, the other will enter mono mode
2. Take it out again to automatically restore stereo mode
Answer / Hang up
When there is incoming call, Short press (any) earbud to answer/hang up the call
Music control
When Playing music, tap the earbud once: Play/pause
When playing music, double tap the R earbud: Skip Track Forward
Turn on/off low latency mode
When playing game, Double tap the L earbud to turn on/off low latency mode
Summon Voice Assistant
When standby, tap (any) earbud three times
Factory Reset
1. Put the earbuds back into the charging case
2. Simultaneously long press the L and R earbuds touch panels for about 10 seconds
3. Release after the lights flash alternately red and white 3 times
4. Take them out from the charging case until the lights on both earbuds flash white slowly
5. Clear phone pairing record and follow the pairing steps to complete Bluetooth connection again
Thanks for watching
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>