RYOBI FVL52 USB Lithium Flip Light User Manual
- June 3, 2024
- RYOBI
Table of Contents
OPERATOR’S MANUAL
USB LITHIUM FLIP LIGHT
FVL52
IMPORTANT SAFETY INSTRUCTIONS
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ
AND KEEP FOR FUTURE REFERENCE.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below, may result in electric shock, fire and/or serious personal
injury.
WARNING!
When using electric appliances, basic precautions should always be followed,
including the following:
- Read all the instructions before using the appliance.
- To reduce the risk of injury, close supervision is necessary when an appliance is used near children. Do not permit children to use light. It is not a toy. The temperature of the LED will become hot after being on for only a short period of time. This hot temperature can cause burn injury if touched and can create sufficient heat to melt some fabrics.
- To reduce the risk of electrical shock, do not put light or charger in water or other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.
- If wrapped or in contact with fabrics, the light lens can produce sufficient heat to melt some fabrics. To avoid serious personal injury, never allow the light lens to come in contact with anything.
- Do not use or permit use of light in bed or sleeping bags. This light lens can melt fabric and a burn injury could result.
- Use only the FVB01 battery pack or UL listed USB sources to charge this device. Use of any other battery packs or non-UL Listed USB sources may create a risk of fire
- Use only recommended battery pack. Any attempt to use another battery pack will cause damage to your light and could possibly explode, cause a fire, or personal injury.
- Remove battery pack from light before performing any routine maintenance or cleaning.
- Do not disassemble the light.
- Do not place or operate LED light, battery or charger near fire, heat, or flammable liquids/gases. They may explode. Also, do not dispose of a worn out battery pack by incinerating. Do not incinerate the battery, even if it is severely damaged or completely worn out. The battery may explode in fire.
- Keep light dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvent to clean the light.
- Do not expose internal flashlight components to rain. Water entering the product will increase the risk of electric shock or malfunction.
LIGHT USE AND CARE
- This product is for household use only.
SAFETY RULES FOR LIGHT
- Always remove battery pack before storing the device.
SAVE THESE INSTRUCTIONS
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with the product.
| SYMBOL | SIGNAL | MEANING |
|---|---|---|
| **** | DANGER: | Indicates a hazardous situation, which, if not avoided, |
will result in death or serious injury.
**| WARNING:| Indicates a hazardous situation, which, if not avoided,
could result in death or serious injury.
**| CAUTION:| Indicates a hazardous situation, that, if not avoided,
may result in minor or moderate injury.
| NOTICE:| (Without Safety Alert Symbol) Indicates information
considered important, but not related to a potential injury (e.g. messages
relating to property damage).
Some of the following symbols may be used on this product. Please studythem and learn their meaning. Proper interpretation of these symbols willallow you to operate the tool better and safer.
| SYMBOL | NAME | DESIGNATION/EXPLANATION |
|---|---|---|
| **** | Safety Alert | Indicates a potential personal injury hazard. |
| Read Operator’s Manual | To reduce the risk of injury, user must read and |
understand operator’s manual before using this product.
| Wet Conditions Alert| Do not expose battery or internal flashlight
components to rain or water.
| Extremely Bright Light| This product uses extremely bright LEDs. To
avoid serious eye injury, do not shine into eyes or face.
| Recycle Symbols| This product uses Lithium-ion (Li-Ion) batteries. Local,
state or federal laws may prohibit disposal of batteries in ordinary trash.
Consult your local waste authority for information regarding available
recycling and/or disposal options.
V| Volt| Voltage
min| Minutes| Time
| Direct Current| Type or a characteristic of current
PRODUCT SPECIFICATIONS
Max Light Output ………………………………… 500 Lumens
Waterproof Rating ……………………………………..IP54
OPERATION
See Figures 1 – 4.
WARNING:
If any parts are damaged or missing do not operate this product until the
parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not direct the light beam at persons or animals and do not stare into the
light beam yourself (not even from a distance). Staring into the light beam
may result in serious injury or vision loss.
A – Battery cap
B – LED lens
C – Adjustable stand
D – Magnets
E – High/medium/Low/off button (If output mode is constant for 5 seconds, the
next click will turn the unit off)
A – Remove battery cap to insert or remove battery pack
B – USB lithium battery pack (FVB01)
A – Rotate stand to desired position
A – Use the stand to mount the light on 2-by material
B – Use the magnets to mount the light on metal surfaces
To request service, purchase replacement parts, locate an Authorized Service
Center and obtain Customer or Technical Support: Visit
www.ryobitools.com or call
1-800-525-2579
If any parts or accessories are damaged or missing, do not return this product
to the store. Call 1-800-525-2579 for
immediate service.
Please obtain your model and serial number from the product data plate.
This product is covered under a 3-year limited Warranty. Proof of purchase is
required.
TTI CONSUMER POWER TOOLS, INC.
P.O. Box 1288, Anderson, SC 29622 • Phone
1-800-525-2579
www.ryobitools.mx
800-843-1111 (en México)
www.ryobitools.com
998000952
3-21-22 (REV:01)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>