Haylou GT2S Earbuds Instruction Manual
- June 5, 2024
- Haylou
Table of Contents
Haylou GT2S (Android)Video
Haylou GT2S (IOS)Video
How to pair
Take out both tow earbuds from the charging case
On phone , Tap Haylou GT2S to connect (White LED will turn off)
Master-salve Switch
1. Put Right earbud back into the case and Left one will auto enter mono mode
2. Take out it again, earbuds will auto enter stereo mode
3. Like wise , Put Left earbud back into the case and Right one will auto enter mono mode
4. Take out it again, earbuds will auto enter stereo mode
Music Control
When Plying:
1. Press MFB on either earbud to Pause/resume playing
2. Double Press MFB on right/left earbud to skip track forward/backward
Voice Assistant
- Triple press MFB to summon Voice Assistant and say next song to skip track
Answer/End/Ignore Call
- Press MFB to answer incoming call
- Press again to End or hold MFB for 1.5s to ignore it
Re-connecting
Take out both earbuds ( LED on right earbud will blink white) and they will auto reconnect to your device.
Factory Setting
1. Hold MFB for 4.5s to power off earbuds (LED Glows red for 2s)
2. Keep holding both MFBs for 15s or until LED s blink red and white 3 times then back into the case.
3. On Phone, delete, relative connectivity record to finish factory setting.
Thanks for watching