True Wireless Earbuds, Bluetooth 5.0 Headphones in Ear-Complete Features/Instruction Guide
- June 5, 2024
- BC MASTER
Table of Contents
True Wireless Earbuds, Bluetooth 5.0 Headphones in Ear
Specifications
- FEATURES : Bluetooth 5.0
- BRAND : BC Master
- COLOR : Black
- WATER RESISTANCE: IPX5
- PLAYTIME: 25-Hour
Introduction
Crisp, high-fidelity sound is provided via Bluetooth 5, which allows for speedier pairing and a robust, efficient wireless connection. With high- sensitivity touch sensors and microphones on each earbud, you can easily manage audio playback and calls. The true wireless earbuds are ready when you are – simply remove them from the charging case and they will connect to your smartphone instantly (after being paired the first time). It has a Playtime of 25 hours The earbuds can play Hi-Fi stereo sound for up to 5 hours on a single charge, with an additional 20 hours stored in the tiny charging case. They are Fit for Any Situation. It has 3 sizes of ear-tips to choose from for a better fit. It has IPX5 water resistance to withstand perspiration during intense exercises and in any weather.
HOW TO PAIR
- Remove the earbuds from the casing.
- Using Left and Right Earbuds Remove only the left/right earbud.
- On the device, you want to pair with the earbud, turn on the pairing function.
- Find and choose “BC-MASTER” from the list of available devices.
Frequently Asked Questions
-
When will my true wireless earphones be fully charged?
Connect the charging cable (included) to the charging connection on the back of the charging case and the other end of the charging cable to a usable USB power source with the earbuds inside. When the power indication light on each earbud turns off, the earbuds are fully charged. -
Why does one of my wireless earphones work but not the other?
Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal. -
Why aren’t my earbuds working?
It’s unlikely that your Bluetooth headphones are defective. It only needs to be reset. In fact, a quick factory reset can cure a variety of problems with a Bluetooth headset, including: If your Bluetooth headset won’t connect to your smartphone or laptop. -
Why aren’t my earbuds communicating with one another?
Step 1: To reset the headphones, double-press the power keys on both sides while the headphones are charging (the white LED indication on the earphones is on). Remove both headphones from the charging case, and they will automatically turn on and connect within 60 seconds. -
Why won’t my earbuds charge?
The most likely cause is a problem with your cable or USB port. Your Bluetooth headphones are not charging because the USB cable is damaged or the USB is put incorrectly. Make sure your USB is fully inserted in both the power supply and the headphones. -
When not in use, can I store wireless earbuds in a charging case?
The battery will gradually decline over time, which is OK; however, charging it every time it drops below 20% charge will greatly extend the battery life of your wireless earbuds. Leaving your wireless earphones in their case while not in use is actually better for the battery life of your headphones. -
Is it possible to charge my earbuds without using the case?
Unfortunately, because the earbuds cannot be charged without a case, there is no other choice in these situations than to purchase a replacement case. -
Do earbuds charge if they aren’t plugged in?
Wireless earbuds can be charged with a USB cable, by placing them into the carrying case, or by wireless charging. When you place the earbuds in the case, they are immediately charged. However, you must additionally charge the case. -
What’s wrong with one of my Bluetooth earbuds?
To repair Bluetooth earbuds, you must first restart the headset. If it doesn’t work, you might try resetting Bluetooth and pairing. If it doesn’t work, check the audio settings on your phone or computer. Otherwise, we believe your sound is the source of the problem. -
What’s the best way to pair left and right earbuds?
Remove the left and right earphones from the case and push and hold the touch control area for 3 seconds or until a white LED light flashes on both earbuds. Long pressing both the left and right earbuds at the same time is critical.