LUCKRACER LR001A Gaming Chair Instruction Manual
- June 5, 2024
- LUCKRACER
Table of Contents
LUCKRACER LR001A Gaming Chair
Dear Customer,
Thank you for choosing us.
We appreciate your trust in us and value your business.
Please feel free to email us directly if you have immediate feedback or
concerns about your purchase. We’ll reply within 24 hours.
At LUCKRACER, we’re always working hard to provide higher quality products and
service for our customers by listening to buyers’ comments and concerns Our
customers also rely on reviews from insightful people such as yourself to
decide which of our products is right for them.
If you have a moment to spare, please leave us feedback or review.
It’s a very quick and easy way for you to make a difference in how we prov
services for customers around the world.
We would really appreciate the help if you have the time, but totally
understand if not.
Either way, we look forward to serving you again in the future.
If you have any further questions, please do not hesitate to contact our
customer service for help.
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Frequently Asked Questions:
Q: Why do l hear a creaking sound after using it for a period of time?
A: The mechanism may not fit these Copyfish reassemble again. Please ensure
NOTE: Assembly in dad tn ha arrived and hu banana- In order to prevent
Assembly Instructions
- 1. Insert the legs into the base center and fix them with M6*20 screws.
- Place the base upside down and insert the casters into the bottom of the base.
- Install the base cover and gas lift. Then insert the gas lift cover.
- install the footrest and tighten the screw.
- Install the mechanism.
- Install the connector on the chair back.
- Place the seat on the gas lift.
- Install the chair back on the rear end of the seat.
- Align screw holes and install the armrests.
- Attach the headrest and lumbar pillow.
FUNCTIONS
- Plug-in USB to enable the massage function of a lumbar cushion.
- Pull upward on a lever to achieve height adjustment.
- Pull upward to recline and push down to lock at your desired angle.