Govee H6154 Smart RGB LED Strip Lights User Guide

Govee H6154 Smart RGB LED Strip LightsSafety Instructions

Read and follow all the safety instructions:

• The product is not water-resistant, be cautious when installing and using.
• Use the product with the provided power adapter only.
• Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
• When bending the strip lights during installation, avoid folding the LED components as it may affect the product’s life span.
• Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
• Do not install the strip lights near any heat sources.
• Do not allow children to install the strip lights alone.
• Avoid installing the strip lights near potentially dangerous sources (e.g., candles, liquid-filled objects).

Introduction

Thanks for choosing the Govee RGB LED Strip Lights. This product is equipped with two 7.5m RGB strip light and supports app, voice (Alexa/Google Assistant), and IR remote control.

What You Get

At a Glance

Using Your Remote Controller

When using the remote controller, ensure it is aligned with the control box receiving port.

modes.

Auto| Switch the Scene mode among 7 options

at random.

Every mode lasts for 30s.

MODE+/-| Press to cycle forward or backward

through 7 Scene modes.

Music Mode| Press to enter Music mode.
Button| Function
---|---
SPEED+/-| In Scene mode, press to speed up or slow down the changing of lights; In Music mode, press to increase or decrease the

micr ophone’s sensitivity.

Adjust Brightness| Dim or brighten the strip light.
COLOR+/-| Press to cycle forward or backward

through 32 colors.

Color Select| Press to change the color.
(RGBW)| R: Red, G: Green, B: Blue, W: White

Installing Your Device

Before You Install

1. Unpack the box and check all items listed in the packing list.
2. Power on the strip lights and check whether they lights up.

Installing Steps

1. Wipe the surface to make sure it’s clean and dry.
2. Peel off the protective film
3. Reinforce via clips around on the tape, stick the strip corners. on and press over it firmly.
4. Peel off the protective film
5. Power on the strip lights on the control box and stick and start using. it on.

Pairing Your Device with the Govee Home App

What You Need

• Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
• smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).
• Pairing Instructions
• Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
• Turn on Bluetooth on your smartphone.
• 0pen the app, tap the “+” icon in the top right corner, and search for “H6154”.
• Tap the device icon and follow the on-screen instructions to complete the pairing.

Pairing Instructions

• Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
• Turn on Bluetooth on your smartphone.
• 0pen the app, tap the “+” icon in the top right corner and search for “H6154”.
• Tap the device icon and follow the on-screen instructions to control the device using your voice.

Specifications

Length| 49.2ft (24.6ft-2 Rolls)/

15m (7.Sm-2 Rolls)

---|---
Light Color| RGB
Water Resistance| NO
Control Method| App, Control Box, IR Remote

Controller, Voice Control

Power Supply| Adapter 12V

Troubleshooting

1. The adhesive tape is not strong enough.
2. Make sure the installation surface is clean and dry.
3. Firmly press over the strip after sticking.
4. Reinforce the installation via more clips and tape.
5. Cannot connect to Bluetooth.
6. Do not skip the Bluetooth connection in the app.
7. ensure Bluetooth on your smartphone has been turned on.
8. Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
9. Power the strip lights and your smartphone Bluetooth off then on, then try again.
10. Ensure that your smartphone is within 1 m/3.28ft of the strip lights when connecting.
11. Clear any obstructions that are between the strip lights and your smartphone.
12. The strip lights do not display the full selected color/Some LED beads do not light up.
13. Please contact the Govee support team for rapid product replacement.
14. Cannot sync the strip lights to the beat of my music.
15. Move the control box closer to the music source.
16. Clean the mic on the control box then try again.
17. Cannot connect to Wi-Fi.
18. Do not skip the Wi-Fi connecting steps in the app.
19. 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
20. Connect your phone to Wi-Fi and check whether the network works well.
21. Make sure you have entered the correct Wi-Fi name and password.
22. Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
23. Connect your smartphone hotspot to the strip lights and check whether the router works with the strip lights
24. Cannot connect to Alexa.
25. Unplug every connective part of the strip lights then firmly reconnect them.
26. Reset your smartphone Wi-Fi.
27. Unplug the adapter port then replug it.

Customer Service

• Warranty: 12-Month Limited Warranty
• Support: Lifetime Technical Support e Email: support@govee.com
• Official Website: www.govee.com

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,. and
2. This device must accept any 1nterference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could find the user s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply the limits for a Class B digital device, pursuant to Part 15 of the Ftc Rules.
These limits are designed to provide .reasonable protection. against harmful interference In a res1dent1al installation. This equipment generates uses and can radiate radio freq.uency energy and, if not installed and u.sed in accordance with the instructions, may cause harmful 1r: interference to radio communications. However, there 1s no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interferen_ce to radio  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.Non-replaceable light source.
Not intended for illumination. Only used for creating ambiance.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The Bluetootli@ word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license.
Govee is a trademark of Shenzhen lntellirocks Tech Co.Ltd.
Copyright ©2021 Shenzhen lntellirocks Tech Co.Ltd. All Rights Reserved.

Govee Home App For FAQs and more information,
please visit: www.govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>