novolink CSL-12-5-BLE Holiday Smart RGBw Cafe String Lights User Guide
- June 5, 2024
- NOVOLINK
Table of Contents
novolink CSL-12-5-BLE Holiday Smart RGBw Cafe String Lights
Setup
- Download the Novolink Lightscape Holiday App from Google Play (Android) or the App Store (iOS).
- Connect the string lights to the controller. Twist the threaded locking ring until tightly secured.
- Plug the controller into a wall outlet. The controller’s light will flash rapidly. It’s now ready to pair with the app.
- Open the Novolink Lightscape Holiday App and log in. Select “Add Device” at the bottom of the screen.
- Select “Cafe Light” and choose in the next screen, select your newly-added Device. You’ll then be connected, and able to customize color, pattern, theme, etc.
Troubleshooting
Controller Light Meaning
- Rapid Flashing Ready to pair
- Slow Pulse Already paired, but App not detected
- Steady On Actively paired with App
Pair with Another Device
To pair string lights with another smartphone or tablet, sever its current
pairing by pressing and holding the controller button until the light blinks,
stops flashing, and then flashes rapidly. It will then be ready to pair with a
new device.
WARNINGS
PLEASE READ BEFORE PROCEEDING
This string light set is not a toy. Keep out of reach of children. The light
set should not be plugged in while still in the packaging. For indoor and
outdoor use. Do not attempt to splice this light set to another light set. The
electric cord cannot be replaced. Only use the included hardware and adapter.
If the string light is damaged or does not work properly, the whole unit
should be replaced if under warranty, or disposed of in accordance with local,
state and federal regulations.
WARNING – RISK OF ELECTRIC SHOCK. IF BULBS ARE BROKEN OR MISSING, DO NOT USE.
- The total connected sets may not exceed the maximum allowed number of 2 extensions to an original set. If this limit is exceeded, it may result in a risk of electric shock or malfunction.
- Ensure that the supply cord and inner wiring are not subject to mechanical load or stress.
- Never hang or mount any object to the lightning chain.
- Always disconnect the supply cord from the electrical outlet when the light set is not in use, or when the area where in use will be unattended for long periods of time.
- For outdoor use, ensure the electrical outlet or any extension cord is in compliance with the protection class IP44 (splash and water proof). If there is any doubt, consult a professional electrician.
- Each section of a connected light set must be mounted individually.
- Dispose of an entire light set if any portion of it is mechanically or electrically damaged.
FCC COMPLIANCE
Contains FCC ID: 2APYD-850008271083
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
TWO YEAR LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this product to be free of defects in material and
workmanship for a period of two (2) years from the date of purchase. This
warranty only applies to the original consumer purchaser and only to products
used in normal use and service. The manufacturer’s only obligation and your
exclusive remedy, is the repair
or replacement of the product at the manufacturer’s discretion, provided that
the product has not been damaged through misuse, abuse, accident,
modification, alteration, neglect, or mishandling. Proof of purchase must
accompany all warranty claims.
WHAT IS NOT COVERED
This warranty does not apply to products that are found to have been
improperly installed, set-up, or used in any way not in accordance with the
instructions supplied
with the product. This warranty does not apply to a failure of the product as
a result of an accident, misuse, abuse, negligence, alteration, or faulty
installation. Batteries supplied with this product are not included in this
warranty. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear.
The manufacturer does not warrant and specially disclaims any warranty,
whether express or implied, of fitness for a particular purpose, other than
the warranty contained herein. This warranty does not cover consequential or
incidental loss or damage, including but not limited to any labor/expense
costs involved in the replacement or repair
of the product.
Contact the Customer Service Team at
1-800-933-7188 or visit
NOVOLINKINC.com.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Novolink, Inc. is under
license. Other trademarks and trade names are those of their respective
owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>