HARBINGER EX7 Expedition Full Bodied Tool Watch User Manual
- June 5, 2024
- HARBINGER
Table of Contents
HARBINGER EX7 Expedition Full Bodied Tool Watch
Congratulations on the acquisition of your new HARBINGER watch. The following instructions have been provided to prepare your watch for everyday use and to help you familiarize yourself with the proper operation and care of your new watch. To ensure your watch ticks for years to come, please read and follow the instructions carefully.
- Crown [A] position (Normal position)
- Crown [B] position
- Crown [B] position
SETTING THE TIME
- Normal position
- Crown out to the position
- Push back to position
- Turn the crown to set hour and minute hands
SETTING THE DATE
- 1. Normal position
- Crown out to the position
- Turn the crown counter-clockwise to set the date
- Push back to position
Do not set the date between 9:00PM and 4:00AM as this may cause a malfunction.
WIND UP THE MAINSPRING
- Normal position
- Turn the crown clockwise to wind up the mainspring Wind by turning the crown clockwise 8 times. It will start to move naturally after shaking slightly.
- To wind up with winding machine. Full wind up conditions:
- Rotary speed: 30rpm
- Operating time: 60rpm
FITTING THE HARBINGER
The HARBINGER MARAUDER model comes with a 316L surgical grade stainless steel bracelet in brushed finish. The length of this bracelet can be adjusted by either removing or adding links to it. To take out a link, push the pressure pin out in the direction of the arrow on the link.
PRECAUTIONS AND PREVENTIVE MEASURES
-
Temperature
Do not expose your watch to sudden temperature changes (exposure to sunlight followed by immersion in cold water) or extreme temperatures [over 60°C (140°F) or below 0°C (32°F)]. -
Magnetic Fields
Do not expose your watch to intense magnetic fields such as loudspeakers, portable telephones, computers or refrigerators and other electromagnetic appliances. -
Shocks
Avoid thermal or other shocks as it may harm your watch. In the event of a violent shock please have your watch checked by an authorized HARBINGER Service Center. -
Care and Checks
Clean the case and bracelet regularly using a soft cloth to prevent any corrosion caused by perspiration. All water resistant watches can be cleaned with a toothbrush and soapy water, and then dried with a soft cloth. -
Water Resistance
Water resistance of watches is rated based on laboratory pressure tests comparable to a swimmer or diver sitting still at that pressure level. However many water-based activities involve a lot of movement and other environmental changes. These exceptions to how the watch was rated may challenge or defeat the water protection features of a water resistant watch. The water resistance of a watch cannot be guaranteed permanently. It may be affected by the aging of gaskets or by accidental shock to the crown.
Never activate the time-setting crown while the watch is under the water and make sure that the crown has been pushed/screwed down tightly after every operation. Do not under any circumstances open the watch yourself.This watch is rated to 20ATM / 200M / 660 FT”.We do not recommend wearing this watch in water (Shower, swimming pool, ocean, hot tub etc.)
International Warranty
Your HARBINGER watch is warrantied for a period of 12 months from the original
date of purchase under the terms and conditions of this warranty. The warranty
covers materials and manufacturing defects.
During the warranty period the watch movement, hands and dial are the only
components covered under this warranty. A covered component will be repaired
or the watch will be replaced free of repair charges, if it proves to be
defective.
The warranty does not cover normal wear of components, or damage caused by
accident or mishandling, or the loss or theft of your watch. Any modification
of your watch by the addition of non-original parts, or the substitution of
parts with non-original parts will void your guarantee.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>