Brookstone BSBTH253 Studio HD Wireless Headphones Instruction Manual
- June 5, 2024
- Brookstone
Table of Contents
Brookstone BSBTH253 Studio HD Wireless Headphones
LITHIUM POLYMER BATTERY WARNINGS
This device contains a non-removable Lithium-Polymer battery. The battery must
be recycled or disposed of properly. Contact your local waste management
office for information on battery recycling or disposal.
Rating Label Definitions
- This symbol signifies the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.
- This symbol signifies and declares that this equipment has battery charging which complies with California CEC and energy efficiency.
- This symbol signifies that this is a wireless device powered by Bluetooth® technology. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., used under license.
- This symbol represents FCC Declaration of Conformity and compliance.
Before You Begin
READ THIS MANUAL CAREFULLY AND SAVE FOR FUTURE REFERENCE
To ensure safe and proper use, read all safety information before using the
device. Only use with manufacturer-approved batteries, chargers, accessories,
and supplies.
- THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play with this device.
- Do not disassemble, modify, or repair the device.
- Do not expose the device to extreme temperatures (heat or cold). open flames, humid, or wet conditions.
- Do not submerge in water.
- Low power may cause poor Bluetooth connection or sound distortion.
- Do not overcharge battery.
- If using with a USB adapter, make sure the adapter is not damaged.
- Do not allow the USB port or the connectors of the supplied USB cable to be exposed to dust, or water, or come into contact with any conductive materials such as liquids, metallic powders, etc.
- This device contains a built-in battery and should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of this device.
- Always be aware of your surroundings when using the headphones
- Never use headphones while driving a vehicle, riding a bicycle, or operating anything that requires your undivided attention
In the Box
- BSBTH253 – Wireless Headphones (x1)
- Micro-USB Charging Cable (x1)
- 3.5 mm Auxiliary Cable (x1)
- Instruction Manual (x1)
Location of Controls
Charging the Headphones
Insert the small connector of the supplied USB charging cable into the charging port on the earcup. Insert the large connector into the USB port on a computer, a USB charging device, or a 5V/1A USB adapter (not included) and plug into an electrical outlet. The LED indicator will tum solid RED while charging and turn BLUE when fully charged. On low power a tone will be heard, indicating that the headphones should be recharged.
Powering On/Off
- Press and hold the [ (!)] button for 2 seconds to power the headphones ON or OFF. A voice will be heard indicating that the headphones have powered ON or OFF.
- When powered on, the headphones will enter Bluetooth pairing mode, and may automatically re-pair to any nearby previously-paired device with Bluetooth enabled.
Listening to Music
To listen to music on the headphones, they must be charged and connected to
wirelessly to a Bluetooth-enabled device, or manually through the 3.5 mm AUX
input port. See the Bluetooth Pairing and the Using the 3.5 mm AUX Port
sections of this manual for detailed instruction. In Bluetooth mode, playback
can be adjusted using the controls on the headphones or your connected device.
In AUX mode, all playback will be controlled by your connected device.
Bluetooth Pairing
- Power the headphones ON. The LED indicator will flash RED and BLUE.
- Open your device’s Bluetooth menu and select BSBTH253 when it appears.
- Another voice will be heard, indicating that the headphones are successfully connected to your device. The LED indicator on the headphones will tum solid BLUE.
In Bluetooth mode, you can control audio playback using your paired device, or with the controls on the headphones listed below.
- Press the button to pause/resume audio playback.
- Press the and buttons to skip tracks.
- Press and hold the buttons to adjust volume.
Phone Calls
When paired to a device via Bluetooth, you can use the device’s phone
functions with the headphone on-ear controls listed below.
- Press the button to answer or end an incoming phone call.
- Double press the button to redial the last outgoing phone number called.
Using the 3.5 mm AUX Port
Plug one end of the included 3.5 mm auxiliary cable into the 3.5 mm AUX input
port on the earcup. Plug the other end into the audio output port on your
media-playing device.
In AUX mode, all playback and volume adjustment will be controlled by your
connected device.
Warranty Information
90-day Limited Warranty Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product (including any accessories included in the original packaging) as
supplied and distributed new by an authorized retailer is warranted by
Southern Telecom, Inc. to the original consumer purchaser against defects in
materials and workmanship (“Warranty”) as follows: To obtain warranty service:
- Visit our website at www.southerntelecom.com
- Click on Product Support
- Select the Brand of your device
- Select Service Request and fill out the form to begin your inquiry
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier. Warranty service not provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification including software modifications such as the installation of custom firmware. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged. All product names, trademarks, and registered trademarks are property of their respective owners. All company, product, and service names used in this document are for identification purposes only. Use of these names, trademarks, and brands does not imply endorsement. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., used under license. Brookstone© trademark, name and logos are trademarks of BKST Brand Holdings LLC and used under license. Manufactured and Marked by Southern Telecom, Inc. under license.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>