Brookstone BKSPS Slim Smart Plug User Manual

**Brookstone BKSPS Slim Smart Plug User Manual

**

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is  subject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  against harmful interference in a residential installation. Thisequipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular  installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measur

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body

For more products please visit www.brookstone.com

SPECIFICATIONS

• Model: BKSPS
• Main Material: PC V0 Fire Retardant
• Input Voltage: AC 100-240V 50/60Hz
• Max Load: 10A
• Max Power: 1100W (110V)
• Working temperature: -4° – 140°
• Size: 49x31mm
• Wi-Fi Standard: 2.4GHz 802.11b/g/n
• System Support: Android™/iOS

WARRANTY INFORMATION

One Year Limited Warranty.

Customer Service: help@smartpointco.com

The BROOKSTONE trademark. names and logos are owned by BKST Brand Holdings LLC ©2019. All rights reserved. Manufactured, marketed and distributed by Smartpoint LLC, under license. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Google, Android and Google Play are trademarks of Google LLC. App Store® is a registered trademark of Apple, Inc. All trademarks and registered trademarks are property of their respective owners.

Made in China ©Smartpoint LLC, 250 Liberty Street, Suite 1A Metuchen  NJ 08840

FEATURES

• Wi-Fi remote controlled
• Programmable with Schedule
• Slim form factor
• App and Voice Control
• Works with Hey Google or Amazon Alexa
  

PRODUCT CONFIGURATION

Items included in package:

2 Slim Smart Plugs and User Manual

DOWNLOAD APP

1. Android™: download “Brookstone Smart” app on Google Play.

2. iPhone: download “Brookstone Smart” app from the App Store.

REGISTRATION AND LOGIN

1. Run the “Brookstone Smart” app from your smart phone.
2. Register and login.
   

*Screenshots may slightly differ from actual app

ADD DEVICE

1. Plug in Smart Plug into electrical socket and hold down on/off button until the light blinks rapidly.

2. Make sure phone is connected to your Wi-Fi network and that it is a 2.4GHz network.

3. Press the (+) symbol in the top right corner of the app and select the Smart Plug from the list of devices to add.

4. Confirm indicator light is blinking and press the “confirm indicator rapidly blinks” button.

5. Make sure phone is connected to the Wi-Fi network that the device will be connected to. Enter your password for the Wi-Fi network.

6. Connecting process will begin. Do not turn off Smart Plug or phone while connecting. Wait for connection process to complete.

7. Once device has been successfully added, name the device what you would like it to be called in the app. The Smart Plug is ready for use
   

PUSH NOTIFICATIONS

1. You can turn on/off notifications for all devices connected to app by clicking on the “Me” button at the bottom right of the screen.
2. Then click on ”Settings” button. From there you can turn on/off all notifications.
   

REMOVE A DEVICE

1. From the home screen, click on the device you would like to remove.
2. Then click on the edit symbol on the top right of the screen.
3. From there you would then click the “Remove Device” button at the bottom of the screen.
   

How to control the Smart Plug with Amazon Alexa

Please make sure that your Alexa app is connected to your Amazon Echo and both work together successfully on your Wi-Fi home network.

Step A. Log into your Alexa app, tap top left corner, and tap “Skills”

Step B. Type “Brookstone Smart”, find “Brookstone Smart” app in the search results and tap “enable” button.

Step C. Enter your account info for the “Brookstone Smart” app, tap “Link Now”, then tap “Authorize” on the next page to link Brookstone Smart account to Alexa.

Step D. Once your Brookstone Smart account is successfully linked to Alexa, the next page will pop up. Tap ”Done” on the top left corner, then tap “Discover Devices” on the next page.

Step E. Wait a few seconds for Alexa to detect the Smart Plug from the Brookstone Smart app and you will find the device named “Smart Plug” has been paired to Alexa app from “Brookstone Smart” app

When you click on a device you can then name them what you choose.

After Step E is done, you can now control the Smart Plug with Alexa app from the devices page.

Step F. Now you are able to control the Smart Plug via Amazon Alexa. Any device plugged into the plug will turn on and off with Alexa.

Try these commands and see what happens by asking Alexa:

• Alexa, turn on “device name”
• Alexa, turn off “device name”

Note: The device name is the one you give to the smart plug on “Brookstone Smart” app. Let’s name it “Living Room”. For example, now you can say:

• “Alexa, turn on Living Room”,
• “Alexa, turn off Living Room”, etc.

If you also want to control the Smart Plug with Google Home, you can continue to read next page.

How to control the Smart Plug with Google Assistant

1. Pair Smart Plug with Brookstone Smart App and name it with an easily recognizable name.
2. Download the Google Home App and register and log in with your Google Account info.

Step A. Once you are logged into your Google Home App, you should see buttons at the top to connect your Brookstone Smart account to the Google Home App.

Step B. Tap the Brookstone Smart button to link your account with Google Assistan

Step C. Enter your account info for the “Brookstone Smart” app, tap “Link now”, then tap “Authorize” on the next page to link your Brookstone Smart Account with Google Assistant.

Step D. You will find that Google Assistant has found the device named ”Smart Plug” on this page.

Scroll down on the home page to see the devices linked to you. You can now control the device through the Google Home App.

Step E. Now you are able to control the Smart Plug with Google Assistant. Any device plugged into the Smart Plug will turn on and off with Google.

Just start with “Hey Google”.

“Turn on device name”
“Turn off device name”

Note: The device name is the one you give to the switch on “Brookstone Smart” App . Let’s name it “Living Room”.

For example:

“Turn on Living Room”
“Turn off Living Room

References

• Amazon.com
• Massage, Personal Care & Home Essentials | Brookstone

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>