AX2V AX-260 1600P QHD Wireless Dash Cam User Manual

AX2V AX-260 1600P QHD Wireless Dash Cam

Preface

Thank you for choosing this AX2V 2K(1600P) QHD Wi-Fi Car Dash Camera. Please read the user manual carefully before using the device.

• The dash camera combined with functions like WDR, HDR, Loop Recording, 170° Wide Angle, Night Vision, Parking Monitor and Time-lapse video recording （Dedicated ACC hardwire kit required, and G-Sensor. Also provide the Wi-Fi wireless connection via Application to your smartphone for live monitor, review, download, and setting of the Dash Cam device.
• Please read the manual carefully for installation, operation, and specification checking. (Specifications may vary upgrades, updates, and other reasons to change, to prevail in kind.)

Before Use

• Download and install the “Viidure” Application from App Store (iOS) or Google Play (Android) to your Power on the dashcam and test the smartphone connectivity before the Installation. Make sure the function works as normal, then start the dash cam installation into your vehicle
• It is recommended to use a high-speed Calss10 MicroSD card (with C10 marked) for this Dash Cam, Max 128GB supported. A 32G MicroSD card has been pre-installed into the card slot of the device. (The other low-speed MicroSD card may cause the system slow or other malfunction during the use.) Format the MicroSD card monthly by Dash Cam via the application setting menu on the smartphone, or for first use of another MicroSD card. has been pre-installed into the card slot of the device. (The other low-speed MicroSD card may cause the system slow or other malfunction during the use.) Format the MicroSD card monthly by Dash Cam via the application setting menu on the smartphone, or for first use of other MicroSD cards.
•  Remove the lens protective film to avoid affecting the recording effect after installing the product for the first time.
• The Parking Mode functions as the optional functions of this device ( Parking Monitor Collision Detection or Time-lapse Video recording) required a DC12V power kit hardware to work with together. (Sold separate, search ASIN: B09WK14C88 from Amazon.com)
• The default SSID of this dash camera is initial letters with “AX2V_CarDV_xxxx “. The default passcode is: 12345678. You can change the SSID and passcode from the APP setting menu after connecting the device via a smartphone connection.
• The dash camera system time and date will be synced with the smartphone automatically after the device is connected to the phone.

Specification

• Main Chipset: Novatek 96675, 2K Resolution,1600P@30fps

• Image Sensor: 5M Pixels COMS sensor
  Lens: 170° Wide-Angle High Definition Camera, F1.8

• Video resolution: 2K QHD 1600P@30fps; 1080@30fps, 720P@ 30fps

• Video format: .TS format, H.264 Coded

• Photo resolution: 12M Pixels

• SD card capacity: Class10, Max 128GB MicroSD card.
  Wi-Fi: Built-in 2.4G Wi-Fi module

• Gravity Sensor: Built-in three-axis collision acceleration sensor

• Parking Mode (Optional): Parking Monitor Collision Detection or
  Time-lapse Video Recording 2 choose 1 at a time.

• Microphone: Built-in; Can be set On/Off via APP.

• Voice notice: Voice notice of major functions by built-in speaker

• Working temperature: -4℉ ~ +149℉（-20℃~+65℃）

• Working Voltage: DC 5V~12V / 1.5A Max

• Rate Power: 7.5W Max

• LED Indicator:
  

  • Red LED ON—Power On / Stop recording / No card (Card error)
  • Blue LED Blinking per 1s — Video recording
  • Blue LED Blinking per 10s — Parking Mode (Time-lapse Video recording)

SD card files path as follows:
“Novatek” folder at the root of SD card, into the folder:
“Loop”: Normal recorded video files
“Snapshot”: Snapshot image folder (The Android devices will download the images to the Smartphone photo album and delete the files on the SD card automatically after exit APP. )
“Locked”: Locked files that won’t be auto write over ( Actives by Collision during normal recording or Parking Monitor or Time-lapse video recording modes)
“Parking Mode” Time-lapse recorded video files

What In the box

Dash Cam × 1pc;
32G Micro SD Card Pre-installed × 1pc
Mounting Bracket × 1pc;
User Manual × 1pc
Car Cig Charger × 1pc (Cable Length (11.5FT))
Crowbar × 1pc;
Electrostatic Film × 1pc;

Appearance and buttons

• The dash camera is designed as detachable with the mounting bracket for
  easy operation.

• Rotatable mounting bracket pad, for vertical view angle adjustable.

•  Function Button:
  Press to Stop / Start Video recording; Press and hold for 10s, to reset the hardware and load the default settings (included the SSID/ PSW of Wi-Fi), after then the dash camera will be restarted automatically.

APPLICATION Installation

For iOS devices: Please search the “Viidure” from APP Store download for free.
For Android devices: Please search “Viidure” from Google Play download for free.
Or Scan the below QR code for quickly download.

APPLICATION QUICK GUIDE

Main page of APP

Real-Time Display Interface of APP File Browse Interface of APP

Click icon from rear-time display page into files browse

“Loop”: Normal recorded video files
“Snapshot”: Snapshot image folder (The Android devices will be downloading the images to the Smartphone photo album and deleting the files on the SD card automatically after exit APP.)
“Locked”: Locked files that won’t be auto overwrite (Actives by Collision during normal recording or Parking Monitor or Time-lapse video recording modes)
“Parking Mode” Time-lapse recorded video files

Video Playback Interface of APP
Click any video file from preview folder, into the playback interface.

Dash Camera Setting Options Interface of APP

Sound Recording: On/Off
Photo Resolution: 12M/10M/8M/Cancel
Video Resolution: 1600P@30FPS/1080P@30FPS/720P@30FPS
Loop Recording Options: Off/1Minute/2Minutes/Cancel
Exposure Compensation: -2~0~+2
Video Watermark: On/Off
Collision Sensing: Off/Low/Middle/High/Cancel Parking Mode (Optional functions, Power hardware kit required)
Parking Monitor Collision Detection: Off/Low/Middle/High/Cancel (Note: ACC Power hardwire kit is required, not included in the package)
Time-lapse Video Duration: 12hour/24hour/48hour/72hour/96hour/Cancel (Note: ACC hardwire kit is required, not included in the package)
Time-lapse Video FPS: Off/1FPS/3FPS/5FPS/Cancel
WI-FI Name: Wi-Fi SSID can be modified
Wi-Fi Password: Wi-Fi passcode can be modified (Press and hold the power button for 10s to rest the passcode to default “12345678”)
Firmware Version: Device Firmware version
Format SD Card: Card format. All contents on the card will be Delete, save the needed files before formatting.
Reset: Load the default settings of all parameters (except Wi-Fi SSID and passcode settings)

Installation Demo

Notice: The dash camera recommends to be mounted at the top-middle of the windshield, behind the rear-view mirror. Which not block the driver’s vision or impede the operation.
There have two options of the wiring diagram to get the power.
Option A: Use the car cig charger that comes with the box. The dash camera will be powered on after the ignition on, and auto power-off once the engine is off.
Option B: Use the ACC power hardware kit to get power from car fuse box.
If there has any question about the installation, please contact us by email: service@ax2v.com

Wiring Diagram

Note: ACC+ power hardwire kit as an optional accessory for Parking Mode functions (both Parking Monitor Collision Detection or Time-lapse Video recording) , not included in the package and sold separate. (Search ASIN: B09WK14C88 from Amazon.com)

Common Troubleshooting

1. A camera can’t Power On:
   Use the original car cig charger that comes with the box, check the car cig charger LED indicator is on; Check the Power USB connector has been plugged into the dash cam USB port. Or if use the power hardware kit, check the B+ and ACC wiring are correct and make sure that the car is in an ignition state.

2. The dashcam recorder cannot record, or the video has dropped frames or freezes：

3. Before use, format the SD card via the setting menu from APP.

4. Check the SD card status, a high-speed SD card or above C10 is required for this device. The low-speed card might cause the system to slow or malfunction of the dash camera.

5. After connecting the recorder to Wi-Fi, there is no display from the APP：

6. The permission requirements when opening the app for the first time must be agreed upon, otherwise, the app cannot be used normally, and it needs to be uninstalled and reinstalled to obtain the permission again.

7.  Check the SSID name of the Wi-Fi that is connected, should be initiated with the letters “AX2V_CarDV_xxxx”, otherwise, disconnect the WIFI and reconnect to the correct
   WIFI SSID.

8.  Ensure that the smartphone does not automatically cut off the WIFI of the recorder.

9. Forget the Wi-Fi passcode
   Press and hold the Power Button for 10s, to reset the hardware and load the default settings, including the passcode of Wi-Fi to “12345678”. If there has any questions or suggestions during the use of the product, please feel free to let us know, we are a 7x24h stand-by and will try to find out the best solution for you ASAP.
   Before you return the product, please contact us first, there might have a better and prompt solution to solve the issue for you. Making every user satisfied is our final goal.
   For Products information: amz-us@ax2v.com
   For Tech Support or After service: service@ax2v.com

Notice:
Do not operate the phone or dashcam while driving. The wireless control of the dashcam via Smartphone only after the vehicle is safely parked.
Apple, iPhone, iPod, iPad, and APP Store are trademarks of Apple Inc., registered in the U.S. and other countries.
Android, Google Play, and Google are trademarks of Google Inc.
Other trademarks and trade names are those of their respective owners.
iPhones, Android smartphones or any other accessories shown or listed are not supplied and must be purchased separately.
Design and specifications are subject to change without notice.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:?(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator and your body: Use only the supplied antenna.
  FCC ID:2A6DA-AX-260

References

• . Spend less. Smile more.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>