XROUND ‎XRD-XV02-NCB Forge NC Noise Cancelling Wireless Earbuds User Manual

XROUND ‎XRD-XV02-NCB Forge NC Noise Cancelling Wireless Earbuds

Safety Reminders

• FORGE NC earbuds were developed to be safe, durable and effective. Please follow these guidelines to prolong the lifespan and ensure safety during use:
• Do not strike, throw, or subject the edrbuds to severe physical shock. Store under dry and non-dusty conditions. Keep away from heat sources (Temperature « 51°C).
• Listening at a high volume may affect your hearing. Please adjust the volume to the lowest acceptable volume.
• For rodd safety, do not use earbuds while driving or ridinga bike.
• Do not use earbuds on railway level crossings, station platforms, crosswalks, and in construction sites.
• Clean the surface with a soft microfiber cloth.
• When the charging case is fully charged, disconnect the charging cable to prolong the battery life.
• Third-party accessories may not be compatible with your device.
• Use only trusted and certified chargers and accessories,
• The earbuds come with small accessories and parts. Keep out of reach of small children.
• Bluetooth signals may suffer from interference in the following environments:
• Multiple Wi-Fi signals or Bluetooth connection in the same area Airports, Express Railway, Metro, and similar areas with high electromagnetic interference

Battery Safety

• Use a charger that meets CE regulations for charging
• Do not modify or disassemble the battery, insert foreign objects, immerse in water or other liquids to prevent battery leakages, overheating. fires or explosions.
• This device has a non-removable, built-in battery, do not disassemble the product or modify the battery.
• Some circuit failures may cause fire or electric shock.
• Dispose used batteries in accordance with local requirements and instructions.

Other Important Information

• The warranty period is within one year from the date of purchase or the date of product shipment. Proof of purchase or warranty may be required for confirmatioon by customer service.
• lf you purchase this product through a distribution channel platform other than the XROUND online official website, and there are product warranty/repair issues, please contact the distributor you purchased from for assistance. For distributor information, please refer to the official website.

User Manual

The following instructions are for the default settings and touch commands can be configured in the “XROUND MyTune” app.

LEFT earbud

Training Timer:

Tap and hold the LEFT touch panel for 1.5 seconds, and release it after you hear the earbuds beep. The timer will start counting down and beep again when the timer runs out. By default,
timer counts down from 30 seconds; you can set the duration of time in the “XROUND MyTune” app.

• Volume Up:
  • Double-tap the LEFT touch panel.
• Volume Down:
  • Triple-tap the LEFT touch panel.

RIGHT earbud

Switch to Active Noise Cancellation/Transparency Mode:
Tap and hold the RIGHT touch panel for 1.5 seconds to switch between Active Noise Cancellation and Transparency Mode. When you switch between two modes, you hear a chime and followed by a voice prompt noise cancelling’ or “ambient sound.

• Play/Pause:
  • Double-tap the right earbud’s touch panel to play or pause.
• Voice Commands:
  • Triple-Tap the right earbud’s touch panel to activate the Voice Commands.

Phone Calls

Audio Prompts

• Power on
• Pairing
• Connected
• Pairing successful
• Battery low
• Power off
• Call Rejected
• Noise-canceling
• Ambient Sound

Reset settings to default

Place both earbuds into the charging case and long-press the function button for 10 seconds until the orange and white earbud LEDs flash simultaneously and the indicator of the charging case will flash 6 times, signaling the earbuds are reset.

Charging Instructions

Charge the Earbuds:
Place the earbuds backinto the charging case to charge. Please wipe the sweat or stains on the charging terminal of the earbuds before charging.

Charge the Charging Case:

Connect the Charging Case via Type-C cable to charge. FORGE NC’s charging case supports wireless charging which meet Qi standard

Under the following circumstances, the charging case will display its battery Ievel

• When the charging case is opened
• When the earbuds are put back into the case
• When using a Type-C cable to charge
• The earbuds automatically power off and recharge in the charging case. LEDS of the earbuds become static orange while charging and will turn off when fully charged.
• The charging case can be charged separately. The indicator of the charging case will flash slowly while charging, and be off when fully charged. If the charging case is out of battery, it will not charge the earbuds.

Specification

Limited Warranty

Dear customer, Thank you for purchasing FORGE NC True Wireless Earbuds. We trust this product will fulfill all your needs and expectations. Should there be a problem, please read the warranty condition below: XROUND Inc. warrants this product for a period of one year from the date of original purchase or date of shipment of new, unused equipment. Upon the expiration of the warranty period, XROUND no longer provides any repairs/replacement This warranty does not cover any defects, failures, or malfunctions caused by the following conditions:

• Damages to the device and various parts result from incorrect operation, abuse, and human negligence.
• Damage caused by force majeure or natural disasters.
• Improper repairs by unauthorized repair centers or personnel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>