Signature DESIGN BY ASHLEY U1280713 Contemporary Leather Power Recliner Instruction Manual
- June 15, 2024
- Signature DESIGN BY ASHLEY
Table of Contents
Signature DESIGN BY ASHLEY U1280713 Contemporary Leather Power Recliner
IMPORTANT SAFETY
IMPORTANT SAFETY NOTICE: READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Be sure to check all packing materials carefully for small parts may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT IJSE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
- When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves—use a step ladder.
- Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
- Where assembly instructions state that the assembly requires two or more people, attempt by yourself as there is a risk of injury.
NOTE
- ASHLEY FURNITURE INDUSTRIES, LLC. DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES THAT MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT OR PROPERLY USE THE PRODUCT.
- YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
Parts
NOTE
- UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE.
- DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!
Installation Instructions
ICP multifunction cup holder
Common problems
Operating instruction
- Connect the 29V2A power supply to power ups the product
- This product has 8 touch buttons and 1 mechanical button. The operation all button is as follows
- This mechanical button is the power button After pressing this button, all functions are turned off (including wireless charging and USB charging) and all button lights are off. Pressing it again to turn on the power, all functions are restored and all touch button lights are blue.
- Long press this button to open the seat actuator.
- Long press this button for the head actuator, waist actuator and seat actuator are all recovered
- Long press this button to extend the waist actuator.
- Long press this button for waist actuator retraction
- Long press this button to extend the head actuator
- Long press this button for head actuator retraction
- Short press this button to open the flip cover, short press again to close the flip cover
- Long press this button for 3 seconds to lock other touch buttons. After the lock, the other touch button lights are off and the touch control is invalid
- The lock button lights turn red, Long press it for 3 seconds again to unlock, all touch button functions are restored and the button light turns blue
- After the flip cover is opened, there is a slot for wireless charging. Put the phone in the slot to start wireless charging. When placing the phone, the back of the phone should face the inclined plane, otherwise, it cannot be charged, When charging, there will be a prompt tone and the power button will change from blue light to green light. If there is no prompt tone and light indication, please check whether the mobile phone is correctly placed
- After the flip cover is opened, the middle round hole is the cup holder placement area
- There is a USB quick charging port in the middle of the touch button, and there is a sliding dust cover, please close the slide cover when you don’t charging to avoid dust.
Specification
- Input: 29V2A
- USB output: 18W
- Wireless charging output: 5W
- Rated power: 58W
Notes
- The flip cover of the product may pop slightly during transportation due to shock and other factors, which is normal. This phenomenon does not occur after power on and the flip cover is opened and closed once
- When the product is powered on, do not operate the flip cover opening and closing button frequently when it is running, so as to avoid frequent and rapid steering that may lead to overheating and damage of the internal motor, thus reducing the service life of the product.
- If the flip cover is in the half-open or half-closed state due to manual press, idling or incomplete closure will occur when operating the flip cover opening and closing button, which is a normal phenomenon. It can be restored by pressing the flip cover button once more to make it open and close fully.
- The appearance of this product adopts wire drawing process, do not scratch the surface with sharp objects
- To ensure the service life of the flip cover, do not manually flip or press the flip cover.
- Tear off the protective film on the inside of the cover when you use it
- Please be careful of small items (such as steel needles) or liquid entering the wireless charging tank. If liquid enters the wireless charging tank accidentally, please immediately turn off the power and power off, remove the extractable inner box, and restart it after the liquid dries. Check whether small items fall into the inner box. If they fall into the bottom, contact the manufacturer
- Please close the electric flip cover and USB dust cover when the product is not in use
- If buttons fail or the flip cover is stuck, power off the device for 2 minutes and restart it.
- Children should be used under the supervision of parents.
SIGNATURE DESIGN BY ASHLEY®
All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>