Dongguan Yangxin Technology S006 8W Bluetooth Sky Light User Manual
- June 5, 2024
- Dongguan Yangxin Technology
Table of Contents
**Dongguan Yangxin Technology S006 8W Bluetooth Sky Light User Manual
**
Unboxing Check
Thank you for purchasing our product, You can expect premium quality innovation and durability from our product. Please read the instruction manual carefully before use. Instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.
Package list
- Starry Sky Lamp x 1
- Remote controller x 1
- USB cable x 1
- User manual x 1
Warnings
The power requirement of this product is USB DC 5V/2A. Optional Please use the regulator device, otherwise it’ll shorten the product’s life span.
Notice
- Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
- This product is suitable for indoor use.
- The product is produced by LED and laser combinations, please do not use laser shone directly in eyes and keep away from children.
How to use
- Indoor use,projection to the ceiling.
- how to use the light projector, as shown below sound
- Connect Bluetooth “5006” of the smart phone to play music.
- Use correct method of the remote control to ensure that the transparent insulating sheet at the bottom of the remote control is pulled out
Host buttons function description
instruction:
When the star projector light connects the power, the LED red light and green laser light enter gradation mode and Bluetooth is turned on.When you use voice control mode 2 playing, the lights will stay always on at full brightness. Otherwise they will always Keep gradation mode.
- short press for previous song; long press increase volume
- short press for next song ; long press reduce volume
- Play mode: Click to switch music play by TF memory card or Bluetooth device
- Laser LED mode: Click to choice
- MIC mode :Click to choice
- Power input: DC 5V/2A C/
- IF memory card slot
- Power ON/OFF/Automatic mode
- Music Stop/play
- Audio input
Statement
This product has been comprehensive and rigorous tested at the factory, the user should strictly follow the warning and instructions. Improper use resulting in product damage is no covered by the company’s warranty.
Remote control function instruction
(Note: the lamp has music memory function. If you use the remote control to turn off music, your previously played music will be saved. When you turn on the light with the remote control, it will continue to play. After turning off the lights, restart all lights and enter the automatic mode)
-
Main power switch All lights auto mode:
-
All modes return to initial state
-
Voice control mode 1:Connect with Bluetooth or TF memory playing music, press “Mic 1” icon, ocean wave and star light will fast-changing following music sound
-
Voice control mode 2:Connect with Bluetooth or TF memory playing music, press “Mic 2” icon, the color of waves will change following music sound (Note: When Bluetooth is not connected and TF card is not inserted, press “Mic 2” icon, the ocean wave light will be always on at the brightest brightness)
-
LED/laser mode selection
-
Laser color selection
-
LED, monochrome/multicolor selection
(Note: There’re 9 options of LED color mode that can be match with 2 Laser mode, you can easily find out your favorite match from various options) -
LED/laser flashing
-
Control ocean wave moving speed down (Fast–Medium–Pause)
-
13Control ocean wave moving speed up (Pause—Medium–Fast)
-
1 H Timer: Shut off automatically after device work for 1 hour. LED light and laser light flash 2 times as prompting for set 1H timer successfully
-
3H Timer: Shut off automatically after device work for 3 hours. LED light and times as prompting for set 3H timer successfully
-
Music on/off: Speaker on/off. When the speaker is turned off, there will be a “power off” prompt sound. At this time, the smartphone cannot search for Bluetooth information, and the built-in music cannot be played. Turn it on again, there will be a “Bluetooth mode” prompt sound.
-
Music stop/play
-
Tone quality regulation:4 built-in tones to choose
-
Play mode: Press this icon achieve Bluetooth, TF mode and built-in music (water sounds and bird calls) swith when connect Bluetooth and TF at same time
-
Previous song
-
Next song
-
Single/sequence: When you use TF mode, this function will be realized, and there will be a beep sound after the setting is successful
-
Control device Volume up (Note: The speaker will beep when the volume is turned to the highest level)
-
Control device Volume down
How to play music
- Play music from smartphone: Turn on Bluetooth and search “5006” on smartphone or pad, touch “5006” to enter the password: 7777 for pairing, switch play mode to\ Bluetooth. (Note: When the projector is powered on, the Bluetooth mode is turned on with a “Bluetooth Mode” tone. When the Bluetooth connection is successful, the player will sound ” the Bluetooth device is connected successfully”. When the Bluetooth is disconnected, the player has a “the Bluetooth device is ready to pale” tone.)
- Play music from mini TF card: Inset your TF memory card and switch to play mode
Specification
Power: 8w
LED light source: 2*4in 1
Green Laser: 532nm
Red Laser: 650nm
Power Input: USB DC 5V
Operating temperature: 14°F —104°F (-10°C —40°C)
Projection Coverage: 161 — 538 f(15-50 )
Product Dimensions: 200x165x135mm
F CC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or medications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the F CC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.