DST ORI Pro Indoor Air Quality Monitoring Device Instruction Manual

DST ORI Pro Indoor Air Quality Monitoring Device

Important Information

Note: To prevent any accidents or damage to the product, please follow the instruction below.

•  Do not operate the device or touch the product if your hand is wet as you may get an electric shock. IS) To prevent the product from short circuits or electric shocks, do not damp the product.
•  During the installation process, the equipment needs to be kept off the power.
•  Do not clean this product with alcohol or other solvents and keep away from excess odor or alcohol. IS) Keep the product away from flammable substances and fire sources, do not be exposed to high temperature, high humidity, flammable gas and liquid environment.
•  The product shall be installed away from vents, cooking equipment and humidifiers and other locations.
•  In order to prevent equipment failure, burning or other danger caused by private disassembly, repair or modification, this product shall not be disassembled, repaired or modified without authorization.
• If any parts of this product (including power plug or product body) are damaged, do not continue to use. IS> Damaged parts can only be replaced by the manufacturer or authorized service center to avoid danger.
• Please operate this product under the supervision of the person in charge of safety.

Compliance statement

Shanghai DST Technology Co.,Ltd .(DST Technology) hereby announces that our products have passed the following certification, marked as follows:

• Product Name: IAQ
• Monitor – ORI Type:ORI PRO
• Model: 1-002

Overview

ORI PRO air quality monitoring device is used to monitor particulate matter (PM2_5), carbon dioxide (CO2), total volatile organic compounds (TVOC), humidity (Humidity), temperature (Temperature) inthe air. The product is suitable for indoor air quality monitoring and it can also be used for evaluation and analysis of fresh air system and air purifier efficiency.

Packing list

• ORI PRO
• Backplane for installation
• Power adapter
• Expansion Screws 3
• Expansion Bolts 3
• User Manual 1
• Calibration Certificate 1

Rear

1. 12 voe 124voc
2. Wi-fl configuration buttion & light

Wi-Fi connection

• Wi-Fi configuration APP download Search WIFI-LINK in Google Play or Apple Store .
• Ensure your phone is linked to Wi-Fi
•  Only 2.4gHZ Wi-Fi can be used .
• Can’t use multi-factor authentication Wi-Fi.
• Open APP WIFI-LINK, add a device in APP
• Select device by code scaning or select device manually in APP.

Power on the device
When device powered on, the Wi-Fi light will keep on, which means the device is not Wi-Fi connected.

Press the Wi-Fi configurator button
Please press the Wi-Fi configurator button for over 5 seconds, the Wi-Fi light will blink and buzzer ring shortly, which means the device is ready for connection.

Enter your local Wi-Fi password in APP

•  Only 2.4gHZ Wi-Fi can be used.
•  Can’t use multi-factor authentication Wi-Fi.

Wait for the Wi-Fi light to turn off
Once the device is Wi-Fi connected successfully, the Wi-Fi light will change from blinking to off .

Installation

Fix backplate
Use the expansion screw to fix the backplate in suitable position in the wall. Please contact after sales technician for the position selection. (Be caution of the wire setting If the power supply wire is inside the wall)

ORI installation
Align the device slot and backplate lock, insert the device into the lock and rotate clockwise until the machine is fixed firmly.

Connect the power
Connect the power adapter with the equipment power charge jack 12V DC/24V DC.

Product specifications

• Material PC (polycarbonate) Color White
• Size q>120*32.5mm Weight 210g
• Working voltage 12VDC / 24VDC Working current 200mA
• Communication Wireless: Wi-Fi (2.4 Ghz ,802.11/b/g/n/)
• Working environment Temperature :0-45°C I Humidity:20-85%(non-condensed

Product parameters

• Parameters Range Monitoring principles
• PM2_5
• 0-500μ9 /m3 Laser scattering
• CO2 400-5000 ppm Disperse infrared
• TVOC 0-20000ppb MEMS
• Temperature (T) 0-40°( Semiconductor
• Humidity (RH) 20-85%RH Semiconductor

Environment

Content of hazardous substances in products Formulated in accordance with SJ/T11364 provisionsThe O indicates that the content of the hazardous substance in all homogeneous materials of the component is below the GB/T26572 limit requirement.The X indicates that the content of the hazardous substance is in at least one homogeneous material of the component exceeds the GB/T26572 limit. Please contribute to environmental protection. \/\/hen the life of indoor air quality monitoring equipment is exhausted, it shall not be treated as ordinary garbage. Please send it to the garbage collection point.

Frequently Asked Questions and Answers

Description
Network connection failure No data uploaded to cloud for a long time
The guarantees Warranty Regulations Check if the network is connected properly If the network is connected normal, please restart the device power, reconfigure the network Power off, reconfigure the network

The guarantees

Warranty Regulations
Within 7 days (based on invoice time), the product may be returned or replaced due to quality failure. Within 1 year (based on invoice time), the product can be replaced for maintenance due to quality failure.

Non-warranty Ordinance
Product failure or damage results from improperly usaqe, maintainace and storage, which is not in accordance with the instructions Exceed the validity period of quality guarantee. Product damage results from accident or human factors.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>