FULAIM WM200 Wireless Microphone Instruction Manual

FULAIM WM200 Wireless Microphone

TFT display of the transmitter

1. Mic icon: shows the working status of the microphone: when muted. the light will turn red.
2. Battery level indicator
3. Connection status indicator: a green light indicates that the receiver was successfully connected; a white light indicates there’s not yet any done connection
4. Audio level: displays the microphone audio signal; a green light indicates the connection is done and working; a white light indicates there’s not yet any done connection
5. Current volume level

User interface of the receiver (RX)

1. Audio output: this socket is for connecting the receiver to any recording device such as cell phones, cameras etc.
2. Headphone output
3. Charging socket: SV=S00mA
4. Power button/MIS: to turn on and off, press and hold for 1 second; click to switch the output mode
5. “A” volume button: adjusts the volume level of the channel A
6. “B” volume button: adjusts the volume level of the channel B
7. Reset button: use a needle, or similar tool, to insert and click the button in the hole to restore the device to its factory settings.

product description

We would like to thank you for choosing our Wireless Microphones. This device adapts 2.4G innovative SMULL technology (Synchronized Multi-node Ultra Low- Latency). that provides high quality audio and stable and reliable signal transmission. It can be widely used in interviews, short video recordings, program hosting, and live streaming. teaching and training, and other wireless applications.

This product line includes the following content:

• Transmitter x 2
• Receiver x 1
• OCamera audio cable x 1
• Storage box x 1
• Type-C recharging cable x
• LUser interface of a transmitter (TX)

User interface of a transmitter (TX)

1.  Charging socket: SV= 500mA
2. Built-in Ml’.:: Omni-directional pickup. put on the microphone windscreen for reducing wind noise
3. Power/Mute button: to turn on and off, press and hold it down for 1 second; give a short press to mute and unmute the microphone.
4. Volume buttons +: turns volume up
5. Volume button -: turns the volume down
6. Reset button: use a needle. or similar tool. to insert and click the button in the hole to restore the device to its factory settings.

TFT display of the receiver

1. Output mode: When the output is set to MONO mix, the channels A and B are all mixed on  both the left and right channel; when set to STEREO Mode, channel A is the left channel output, while channel B is the right channel output.
2. Battery level indicator
3. Connection status indicator: a green light indicates that the transmitter is connected; an orange light indicates that the connected transmitter battery is low; a white light indicates there’s not yet any done connection.
4. Audio level
5. Current volume level

Storage box a

1. Charging socket: 5V =1 A
2. Status indicator: indicates battery level and charging status
3. Function button: a single click forces turning on the device; a double click will force the device
   to shutdown; no matter whether it is turned on or off, when the TX or RX will start charging automatically once is inserted in its charging base, and it will automatically turn off when the battery is fuly charged.

Matching

If it happens that TX and RX cannot be reconnected, please follow the steps below for re-matching:

1. IX: turn on the transmitter, press and hold down the volume buttons and at this very time, the display panel of the transmitter should flash and enter in matching mode (if there are two TXS, just operate in the same way as above): then proceed to step 2.
2. RX: turn on the receiver and press and hold the volume button “A” and “B” at the same time. The display panel of the receiver will flash and enter in matching mode; after 5-10 seconds, the display panel of both TX and RX should stop flashing, this indicates that re-matching has been done successfully.

First use steps

RX- How to use with other devices:

1. Connect the “OUT” socket of the RX with the Type-C/USB socket of the laptop using a ype-C audio cable
2. Connect the “OUT” socket of the RX to the “MIC IN” or “LINE IN” of the audio interface using a 3.5 mm camera audio cable
   If the type-C/Lightning audio cable is not provided, please consult with the dealer or manufacturer for details.

Precautions

1. This product is a precise electronic device, which should avoid watering or heavy tall; if it gets wet, please dry it ASAP, and hand it over to professional technicians for further checking if necessary.
2. If it’s not going to be in use for a long period of time, the built-in rechargeable Li-battery should be fully charged every three months to keep the battery’s high-rate performance
3. Ihe built-in battery must not be exposed to sunlight, fire, or similar overheating environment conditions.
4. Please always use the cable included or recommended by the dealer/manufacturer, since cable sourcing from a market with inconsistent technical standards which will affect product performance or cannot be used at all.
5. To avoid intermittent signals, try keeping the transmitter facing the receiver while using it.

As shown below

Specifications

• Frequency range: 2400-2480 MHz
• Modulation: GFSK
• Frequency response: 30 Hz-20 kHz
• Audio latency: 20 ms
• Transmit power: 50 mW
• S/N ratio: B0 dB
• Power supply: DC3.7V/300mAh (built-in Li-battery)
• Recharging input: 5V= 500mA
• Recharging period: s1.5 hrs
• Operating time: 12 h. approx.
• Power management: TX and RX will shut down automatically after 10 minutes without connection Reference operating range: 50 meters outdoors in open areas
• Optimal operating temperature: 0’C to 55 “C
• Optimal storage temperature: -20 °C to +55C
• Dimensions: s6 x 35 x 14.5 mm (TX/RX)
• Net weight: TX 28 g approx.; RX 28 g approx

Storage box

• Recharging input: 5V 1A
• Power supply: DC 3.7V/300 mAh (built-in Li-battery) The images shown here are for reference only. If there’s any inconsistency between the images and the received product, the real received product shall prevail as standard, We reserve the rights to improve our products and any product copyright information and material without prior notice
• Version: V1.0-2021-10

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>