Govee H617C 32.8ft RGBIC LED Strip Lights User Manual

June 5, 2024
Govee

Govee H617C 32.8ft RGBIC LED Strip Lights User Manual
Govee H617C 32.8ft RGBIC LED Strip Lights

SAFETY INSTRUCTIONS

Read and follow all the safety instructions:

  • The product is not water resistant, be cautious when installing and using.
  • Use the product with the provided power adapter only.
  • Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
  • When bending the strip lights during installation, avoid folding the LED components as it may affect the products life span.
  • Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
  • Do not install the strip light near any heat sources.
  • Do not allow children to install the strip light alone.
  • Avoid installing the strip light near potentially dangerous sources (e.g., candles, liquid-filled objects).
  • Unroll the strip lights before powering them on.

Introduction

Thanks for choosing the Govee RGBIC LED Strip Lights. This product is equipped with a 10rn RGBIC strip light and suppor-ts app. RGBIC is Govee’s latest lighting display technology. With its advanced IC chips (independent control), each strip light segment can be adjusted independently, creating vibrant rainbow effects.

What You Get

LED Strip Lights 1
Adapter 1
User Manual 1
Service Card 1

At a Glance

At a Glance

Before You Install

  1. Unpack the box and check all items listed in the packing list.
  2. Power on the strip light and check whether it lights up.

Installing Steps

  1. Wipe the surface to make sure it’s clean and dry.

  2. Peel off the protective film on the tape, stick the strip on and press over it firmly.
    Installing Steps

  3. Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effect.

  4. Power on the strip lights and start using.
    Installing Steps

Pairing Your Device with the Govee Home App

Pairing Instructions

  1. Download the Govee Home app from the App Store (i0S devices) or Google Play (Android devices).
  2. Turn on Bluetooth on your smartphone.
  3. Open the app, tap the “+” icon in the top right corner and search for “H617C”.
  4. Tap the device icon and follow the on-screen instructions to complete pairing.


Specifications

Length 10m/32.8ft
Light Color RGBIC
Water Resistance NO
Control Method App, Control Box
Power Supply Adapter 24V

Troubleshooting

  1. The adhesive tape is not strong enough.

    • Make sure the installation surface is clean and dry.
    • Firmly press over the strip after sticking.
    • Reinforce the installation via more clips and tape.
  2. Cannot connect to Bluetooth.

    • Do not skip Bluetooth connection in the app.
    • Ensure Bluetooth on your smartphone has been turned on.
    • Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
    • • Power the strip lights and your smartphone Bluetooth off then on, then try again.
      • Ensure that your smartphone is within 1 m/3.28ft of the strip lights when connecting.
      • Clear any obstructions that are between the strip lights and your smartphone.
  3. The strip lights does not display the full selected color/Some LED beads do not light up.

    • Please contact the Govee support team for rapid product replacement.
  4. Cannot sync the strip lights to the beat of my music.

    • Move the control box closer to the music source.
    • Clean the mic on the control box then try again.

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: [email protected]
Official Website: www.govee.com

@Govee
@govee_official
@govee.official
@Goveeofficial
 @Govee.smarthome

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-005.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. la distance entre. This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced. Not intended for illumination. Only used for creating ambiance.

  1. Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
  2. Do not use the rope light when covered or recessed into a surface;
  3. Do not open or cut the rope light;

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.

Responsible party : Name: GOVEE MOMENTS(US) TRADING LIMITED Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448 Email: [email protected]

Contact information: https://www.govee.com/support Govee is a trademark of Shenzhen Intellirocks Tech Co.,Ltd. Copyright ©2021 Shenzhen Intellirocks Tech Co.,Ltd. All Rights Reserved.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

ATTENTION : RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACEE PAR UN TYPE INCORRECT. ELIMINER LES BATTERIES USEES CONFORMEMENT AUX INSTRUCTIONS.

FOR INDOOR

USE ONLY POUR UNE UTILISATION EN INTERIEUR UNIQUEMENT

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Govee User Manuals

Related Manuals