Jabra Evolve 75e In-Ear Wireless Headphones User Manual

: June 5, 2024
: Jabra

Questions? Click to Live Chat
Evolve 75e
User manual

Making Life Sound Better

© 2017 GN Audio A/S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.

Made in China
MODEL: HSC070W/END040W

Declaration of Conformity can be found on www.jabra.com/CP/US/doc

Welcome

Thank you for using the Jabra Evolve 75e. We hope you will enjoy it!

Jabra Evolve 75e features

UC certified microphone technology
Active Noise Cancellation (ANC) to eliminate disturbances
Integrated Busylight to prevent interruptions
Power battery to fuel all-day use (up to 12 hours on a 2 hour charge)
Dual-connectivity to two Bluetooth devices, enabling you to take calls and listen to music from the same earbuds
Up to 30 meters / 100 feet of wireless range for true mobility
Vibrating call alert to ensure you never miss a call
Listen-in feature: Hear the conversations around you, at the touch of a button

Jabra Evolve 75e overview

Included accessories

*Requires Microsoft Teams headset variant

How to wear

Jabra Evolve 75e is designed to be worn around the neck.
For the optimal call experience, position the microphone as close to your mouth as possible.

Getting the correct fit

The earbuds are supplied with three EarGel and EarWing sizes: large, medium and small.

It is highly recommended to mix and match the different EarGel and EarWing sizes to find the best combination for your ear. The correct fit will feel tight and will seal out background noises.

Attaching the EarWings

To properly attach the EarWing, align the indent on the EarWing (as illustrated) with the ridge on the earbud, and stretch the EarWing over the earbud. It will fit perfectly in the groove when properly attached.

Using the magnetic earbuds

The earbuds are magnetic, and connect together for convenient cable and power management. When the earbuds are connected, your music will be paused or your call will be ended. Go to section 6.1. for more information.

How to charge

To charge the earbuds, connect a USB charging cable to the USB charging port on the neckband. It is recommended to charge the earbuds using the supplied Jabra charging cable, however it is possible to charge the earbuds using your smartphone charger.
It takes approx. 2 hours to fully charge the earbuds.

Note: Always clean and dry the USB charging port before charging the earbuds. It is recommended to recharge the earbuds at least once a month.

What the LEDs mean

How to connect

Power on/off

On: Hold the Multi-function button for 1 second. The LED will flash green, and the neckband will vibrate.
Off: Hold the Multi-function button for 3 seconds. The LED will flash red, and the neckband will vibrate.

Connecting to a computer (Bluetooth adapter)

Insert the Bluetooth adapter (Jabra Link 370) into your computer.
Hold (1 sec) the Multi-function button on the earbuds to power them on. The earbuds and the Bluetooth adapter are pre-paired and will automatically connect.

Connecting to a computer (USB cable)

Ensure the earbuds are powered on.
Plug the earbuds into a USB port on your computer using the supplied USB cable.

Pairing with a smartphone

Ensure the earbuds are powered off, and then hold (3 secs) the Multi-function button until the LED flashes blue and you hear an announcement in the earbuds.
Wear the earbuds and follow the voice-guided pairing instructions.

How to use

Calls & music

Calls & music

| Power on| Hold (1 sec) the Multi-function button
---|---|---
Power off| Hold (3 sec) the Multi-function button
Play/pause music| Hold (1 sec) the Multi-function button
Answer/end call| Press the Multi-function button when
not on a call
Reject call| Double-tap the Multi-function button
Open Microsoft Teams notification*| Press the Multi-function button

*Requires Microsoft Teams headset variant

| Answer/end call or play/pause music| Detach/attach the magnetic earbuds
---|---|---
| Adjust volume| Press the Volume up or Volume down button, when listening to music or on a call
Next track| Hold (1 sec) the Volume up button
Previous track| Hold (1 sec) the Volume down button
Battery status| Press the Volume up or Volume down button, when not listening to music or on a call
Busylight on/off| Press both the Volume up and Volume down buttons simultaneously
| Siri or Google Now| Press the Mute/Voice button, when not on a call
Mute/un-mute microphone| Press the Mute/Voice button, when on a call
| Cycle between ANC and HearThrough modes| Press the Audio mode button
Listen-in on/off| Hold (2 secs) the Audio mode button

Active Noise Cancellation (ANC)

The earbuds use Active Noise Cancellation (ANC) to eliminate outside disturbance, allowing you to fully focus. Press the Audio mode button to cycle through the available options.

HearThrough

HearThrough enables you to hear your surroundings without needing to remove the earbuds. Your music will not be muted.
Press the Audio mode button to cycle through the available options.

Listen-in

Listen-in enables you to engage in conversations without needing to remove the earbuds. Your music will be muted.
Hold (2 secs) the Audio mode button to activate Listen-in.

Voice guidance

Voice guidance are announcements intended to guide you or give earbud status updates (e.g. connection and battery status).

How to turn voice guidance On/Off
Voice guidance is enabled by default.
Voice Guidance On: Ensure the earbuds are powered on, and then hold the Mute/Voice button for 5 seconds.

Voice Guidance Off: Ensure the earbuds are powered on, and then hold the Mute/Voice button for 5 seconds.

Siri or Google Now

Phone voice commands enable you to speak to Siri or Google Now on your smartphone using your earbuds. For more information on using Siri or Google Now, please refer to your smartphone’s user manual.

Phone voice commands

| Activate Siri or Google Now (phone dependent)| Press the Mute/Voice button, when not on a call
---|---|---

Multiple call handling

The earbuds can answer or reject calls when you are already on a call.

Multiple call handling

| End current call and answer incoming call| Press the Multi-function button
---|---|---
Put current call on hold and answer
incoming call| Hold (1 secs) the Multi-function button
Switch between held call and active call| Hold (1 secs) the Multi-function button
Reject incoming call, when on a call| Double-tap the Multi-function button

Busylight

The Busylight lets others know when you are busy or on a call.

Busylight

| Busylight on/off| Press both the Volume down up and Volume down
buttons simultaneously to turn the Busylight on/off
---|---|---

To disable (or re-enable) the Busylight function, hold both the Volume up and Volume down buttons simultaneously for 3 seconds.

Vibrate alert

The earbuds will vibrate whenever they are powered on/off, connected to your smartphone or computer, or whenever there is an incoming call.

How to reset

Resetting the earbuds clears the list of paired devices and all earbud settings.
After resetting, it is necessary to re-pair the earbuds to your smartphone or to your Bluetooth adapter (Jabra Link 370). Please note that Jabra Direct is required to re-pair the earbuds to the Bluetooth adapter.

Reset

| Reset the pairing list| Ensure the earbuds are powered on and you are not on a call. Then simultaneously hold the Volume up and the Multi-function button for 5 seconds. You will then need to re-pair the earbuds.
---|---|---

Firmware update

Firmware updates improve performance, or add new functionality to Jabra devices.

Connect the Jabra Evolve 75e to a computer using the USB cable or Jabra Link 370.
Install Jabra Direct on your computer, or Suite for Mac on your Mac.
Use Jabra Direct or Suite for Mac to check for the latest firmware updates.

Support

FAQ

View the FAQs on Jabra.com/Evolve75e

How to care for your earbuds

Always store the earbuds with the power off and safely protected.
Avoid storage at extreme temperatures (above 50°C/122°F or below -10°C/14°F). This can shorten battery life and may affect the earbuds.
Regularly clean the metal mesh on each earbud to avoid them becoming blocked.

jabra.com/evolve75e