GTRACING GT-LYNCK2 USB Bluetooth Transmitter User Manual

GTRACING GT-LYNCK2 USB Bluetooth Transmitter User Manual

Dear Customers:

Thank you for choosing GTRACING. To further understand the product, please read this instruction carefully before use. Providing you with quality products and services is our constant pursuit!

Product specification

Device Name: GTRACING Bluetooth Transmitter Input Interface: USF3

Connection Distance: 15m (without occlusion)

Working Frequency Range: 21102G1-2-2.480G1-1Z

Support Protocol: A2DP, AVRCP, HFP, SPP, BR HID, HOST, BR, HIDDEVICE, BLE, HID

Compatibility: PS4/PS5, Switch rBase Modei ,PC,MAC, Xbox IN Modei , Multi—point function, Connect To 2 Devices Simultaneously.

Product Overview

• Connect To 2 Devices Simultaneously
• Free Driver
• Plug and Play
• Bluetooth 5.1

Operation steps

Bluetooth Pairing Operation:

1. The GTRACING Bluetooth transmitter (hereinafter referred as(the product)) is inserted into USB port of audio output device (PC,TV,PS4/5,etc.), the product indicator flashes red and blue light( ), and enter the pairing mode to auto—matically search for a nearby Bluetooth receiving device.(The product is plug and play, drive—free installation)

2. Tum on Bluetooth receiving device and set to pairing mode (sot according to Bluetooth receiving device instructions). When automatically paired and connected, the Bluetooth receiving device and the distance between this product needs to be ≤1m, and the connection needs to wait for approximately 30s, the closer the distance, the faster it is connected.

3. The product is automatically paired with the Bluetooth receiving device. After the successful connection, the product indicator light is blue ( ) Flash mob 3 times; The indicator light is blue in normal connection use( ) Flash once every 5 seconds;

Reconnection Function:

When the product is once again inserted into the audio output device, it will be automatically connected to the last 2 connected Bluetooth devices. with the reconnection waiting time being about 30s:

Connect To 2 Devices Simultaneously:

This product supports simultaneous connection to 2 Bluetooth receiving devices here in after called device A)/(Device B). and can output sound at the same time.

1. Please pair the product with the Device A according to the 3.1 Bluetooth pairing operation. and turn off the Device A after the setting is completed.

2. Tum on the Device B to enter the pairing state, repeat the Device A pairing operation steps, and keep the product connected with the Device B after completed pairing.

3. Turn on Device A again, the product will automatically connect Device A. When the Device A/B are both successfully connected. turn on the audio source to play, check whether the Device A/B are normally sound. both sound means that the pairing operation of connecting 2 Bluetooth devices simultaneously function is completed.

4. If neither 1 or 2 of the Device A/B speaks out, unplug the product from the audio output device and reconnect the Device A/B by following the above operation steps.

5. When the function of connecting 2 devices simultaneously is connected again, first plug the product into the USB port of the audio source device, then turn on any Bluetooth receiving Device A/B. After successfully connected with the product, the other Bluetooth receiving Device A/B is turned on for connection operation, which can be used again after successful connection.

Care and maintenance

1. When the product is being used during setting up the function of connecting 2 devices simultaneously, be sure to turn off the paired Device A Bluetooth function before repairing to connect to Device B;
2. When the product uses the function of connecting 2 devices simultaneously, the distance between the product and Device A/B should be kept within 5m, otherwise, the one farthest from the product in Device A or Device B will be disconnected. When pairing a single device only, the maximum distance from the product without obstruction is 15m;
3. Bluetooth receiving device beyond the valid connection range, damage or shutdown, will cause disconnection from the product;
4. This product is not allowed to be used near magnets or products with strong magnetic fields, which will affect the normal function of the product or damage the product;
5. This product is radio signal transmission, please confirm whether other device in the use environment is subject to this restriction.
6. If you do not use this product for a long time, please store it in a dry,dust—free, and small temperature change environment.
7. Please avoid using this product in extreme high or low temperatures and humid conditions.
8. Do not drop or throw the product, rough use may damage the product.

FAQs

When you encounter the following problems, you can try the following methods, if there are still problems after processing, please contact GTRACING after—sales service, do not dismantle and repair, so as not to cause unnecessary trouble!

The product cannot be normally used
Please check that the product is plugged in place? Is there any poor contact? Please try plugging this product again.

Can’t search for Bluetooth device connection (such as a Bluetooth headset or speaker)
Check if your Bluetooth device is paired up. You can also restart the product or Bluetooth device to try.

The connection status of the Bluetooth device can be judged according to the product status indicator light.

Sound intermittent, lag phenomenon appears in use
You can reduce the distance between the Bluetooth receiving device and the product or try to restart the product and reconnect. (Note: Please do not put the product on metal objects with shielding. It may also cause intermittent sound or lag if the product signal is disturbed or blocked. )

WARNING

1. To remove this product, please apply for an GTRACING after sales service or an authorized manufacturer to do so;
2. To ensure the service life of this product and your physical
   and mental health, please do not listen to music for a long time.

Producers: GTracing
Web: www.gtracing.com

Version 222.1

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>