Soundcore by Anker Life A1 True Wireless Earbuds, Powerful Customized Sound, 35H Playtime, Wireless Charging-Complete Features/User Guide
- June 5, 2024
- Soundcore
Table of Contents
Soundcore by Anker Life A1 True Wireless Earbuds, Powerful Customized
Sound, 35H Playtime, Wireless Charging
Specifications
- BRAND : Soundcore
- COLOR : Black
- CONNECTIVITY TECHNOLOGY : Wireless
- MODEL NAME : A3927011
- FORM FACTOR : In-Ear
- INPUT: 5 V 0.7 A
- RATED OUTPUT POWER: 5 mW @ 1% THD
- BATTERY CAPACITY: 85 mA x 2 (earbuds); 770 mA (charging case)
- CHARGING TIME: 2 hours
- PLAYTIME: (VARIES BY VOLUME LEVEL AND CONTENT ): Up to 9 hours, (Total 35 hours with the charging case)
- DRIVER SIZE: 8 mm x 2
- FREQUENCY RESPONSE: 20 Hz – 20 kHz
- IMPEDANCE: 16 Ω
- WATERPROOF LEVEL: IPX7
- BLUETOOTH VERSION: V 5.0
- BLUETOOTH RANGE: 10 m / 33 ft
Introduction
The Life A1 true wireless earbuds have bigger 8mm drivers with triple-layer composite diaphragms that deliver strong sound with 40% more bass, 100% more treble, and crisp Mids. Signature mode creates a well-balanced sound that works well with many types of music. Switch to Bass Booster for workouts to amp up bass-heavy tracks, or choose Podcast to boost mids for podcasts and audiobooks. The Life A1 true wireless earbuds provide 9 hours of playing on a single charge, with the tiny charging case providing an additional 3 charges. When you’re in a hurry, a simple 10-minute charge provides you 1.5 hours of listening time. You can Charge the case quickly with the provided Anker USB-C connection, or simply place it on a wireless charging pad for speedy recharging.
PRODUCT OVERVIEW
WHAT’S IN THE BOX
- Life A1 True Wireless Earbuds
- Charging Case, USB-C Cable
- XS/S/M/L/XL EarTips, S/M/L EarWings
CHARGING
- Fully dry off the earbuds and the USB port before charging.
- Use a certified USB-C charging cable and charger to prevent any damage. Fully charge both the earbuds and the charging case before the first use.
- Place the earbuds in the charging case and close it.
- Connect the charging case to the power supply by using a USB-C charging cable. Alternatively, position the charging case at the center of your wireless charger for wireless charging. The LED indicators on the charging case indicate the charging status.
WEARING
- Choose the EarTips and EarWings that fit your ears best.
- Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.
Your earbuds come with multiple pairs of eartips and EarWings, among which Medium-sized are pre-installed.
POWERING ON/OFF
The earbuds will automatically power on when taken out of the charging case. The LED indicator on the earbuds will light up white for 1 second.
To power off, place the earbuds in the charging case.
- The earbuds will automatically power off after 2 minutes if no device is connected.
- To manually power on, press and hold the multi-function button on both earbuds for 1 second until the LED indicator turns white for 1 second.
- To manually power off, press and hold the multi-function button on either earbud for 8 seconds until the LED indicator turns red for 1 second.
BLUETOOTH PAIRING
-
Take the earbuds out of the charging case, the earbuds will automatically enter the Bluetooth pairing mode. The LED indicator on one earbud will flash white.
-
Select “Soundcore Life A1” on your device’s Bluetooth list to connect. When successfully connected, the LED indicator on the earbuds will flash white once every 5 seconds
-
When earbuds are out of the charging case and powered off, to manually enter Bluetooth pairing mode, press and hold the multi-function button on both earbuds for 3 seconds.
-
Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
-
Mono mode: When Bluetooth is connected, you can use either one of the earbuds only by placing the other one into the charging case.
-
When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
-
When you are on a call, place either one of the earbuds into the charging case, the microphone in the other earbud will be activated.
-
The right earbud is the primary earbud by default. If you want to change this, remove the right earbud from your ear and place in the charging case, the microphone in the other earbud will be activated and become the primary earbud.
-
Play/Pause Press twice (R)
-
Next track Press twice (L)
-
Adjust volumePress once (L/R)
-
Adjust EQ settings
(Soundcore Signature/Bass Booster/Acoustic) -
Press three times (L/R)
Answer/End a call
Answer a second incoming call and put the current call on hold Press once
(L/R)
Reject a call
- Transfer a call between earbuds and mobile phone Press and hold for 1 second (L/R)
- Switch between a call on hold and an active call
- Activate Siri or other voice assistant software Press and hold for 1 second (L/R)
Mono mode
- Play/Pause Press twice
- Answer/End a call
- Reject a call
- Activate Siri or other voice assistant software Press and hold for 1 second
RESET
You might need to reset your earbuds if you experience any connectivity problems or function issues.
- Place the earbuds in the charging case and make sure they are being charged.
- Press and hold the button on both earbuds for 8 seconds until the earbud LED indicators flash red for 3 times
- Take the earbuds out of the charging case and wait until the LED indicator on one of the earbuds flashes fast while the other breaths slowly. This confirms that the reset was successful and your earbuds can be connected normally.
Frequently Asked Questiosn
-
What is the best way to control the volume on my Soundcore earbuds?
You can control double tap and long press with the Soundcore app. I have mine set up so that a long push (2 seconds) controls the volume. Volume down is achieved by using the left long press button. Long right press = volume up. -
What is the best way to attach Soundcore life A1 earbuds?
Pairing Bluetooth Devices
When you remove the earphones from the charging case, they will instantly go into Bluetooth pairing mode. One earbud’s LED indicator will glow white.
To connect, go to your device’s Bluetooth list and select “Soundcore Life A1.”\ -
When my Soundcore earphones are fully charged, how do I know?
While the case is charging, there will be one steady white light on the case and one steady white light on each earbud to indicate that the earphones are charging in the case. When they are fully charged, the light will turn off. -
How can I increase the volume of my Soundcore earbuds?
The only option to increase the volume is to select custom and raise all of the bars to the top. Are you certain your earbuds are properly seated in your ears? The ear-tips should be able to close the ear canal. Aside from that, the sound quality is awful. -
Is there a volume control on the Soundcore earbuds?
You may now customize the controls on the earphones to increase or decrease the volume on your device using the soundcore app. -
What is the procedure for resetting Soundcore Life A1 earbuds?
Follow the instructions below to reset the earbuds: – Make sure the earphones are charged by placing them in the charging case. – For 3 seconds, press and hold the button on both earbuds. After three red flashes, the LED indicators will become white. -
What is the procedure for turning on Anker wireless earbuds?
To switch the earbuds on manually, press and hold the multi-function button on each for 1 second, or until the LED indication becomes white. Press and hold the multi-function button on either earbud for 8 seconds, or until the LED indicator goes red for 1 second, to switch it off manually. -
How long does it take to charge Soundcore earbuds?
The earbuds themselves take roughly 1.5 hours to fully charge. The case, on the other hand, will take two hours to completely charge and will supply enough power for three charging cycles. -
What is the procedure for turning off Anker Soundcore earbuds?
When you put the earbuds back into the charging case and close it, the earbuds will turn off automatically. To turn the earphones on manually, press and hold the multi-function button on one of them for 1 second. To turn off the earbuds manually, press and hold the multi-function button on either earbud for 5 seconds. -
What is the procedure for enabling SoundCore?
By pushing the ‘Power’ button for one second, you can turn the speaker on or off. When SoundCore is turned on, it will attempt to connect to the most recently connected device if one is available. By tapping the ‘Volume up/dow buttons while listening to music, you can modify the volume level
https://manuals.plus/soundcore/life-a1-manual.pdfv