Actiontec ECB7250A 2.5 GbE MoCA 2.5 Extender User Guide

: June 5, 2024
: Actiontec

Table of Contents

Actiontec ECB7250A 2.5 GbE MoCA 2.5 Extender
Quick Start Guide
Tech Support
Package Contents:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Actiontec ECB7250A 2.5 GbE MoCA 2.5 Extender

Quick Start Guide

Congratulations! You’ve successfully connected your device to the Internet. Additional MoCA Extender may be purchased and connected to other devices needing an Ethernet connection and that are near a coaxial port.

Tech Support

For registration or access to user manuals, wall-mount templates, software updates, etc. visit our webpage: https://[support.actiontec.com](http://support.actiontec.com)/![Actiontec -ECB7250A -2.5- GbE- MoCA -2.5 -Extender -product](https://manuals.plus/wp- content/uploads/2022/05/Actiontec-ECB7250A-2.5-GbE-MoCA-2.5-Extender- product.png)

This Quick Start Guide will walk you through the easy steps to connect your MoCA Extender.

Package Contents:

(2)MoCA Extender
Power Adapters (External, 5V DC, 2A (2) made by APD, Model #WB-10E05FU)
Coaxial Cables
(2)Ethernet Cables
Coaxial Splitters

Step 1: Connect to your Device

Get one MoCA 2.5 Extender.
Locate the device or access point (laptop, etc.) that needs to connect to the Internet. Connect one Ethernet Cable from the Extender to the Device.
Connect one Splitter to the Coax Cable coming from the Coax Outlet on the wall.
Connect one Coax Cable from the Splitter to the Coax In port on the Extender. Connect one Power Adapter to the Extender and to a Power Outlet.
Wait until the Power light on the front of the adapter is GREEN.
IMPORTANT! If the Coax LED on the Extender is already GREEN, you may have MoCA built in to your modem/router. Check the device you just connected. If it is connected to the Internet, you’re done*. If the device does not connect to the Internet, continue to Step 2.
- You may use the 2nd adapter with another device or access point.

Step 2 : Connect to your Modem/Router

Get one MoCA 2.5 Extender.
Connect one Ethernet Cable from the Extender to the Modem/Router.
Connect one Splitter to the Coax Cable coming from the Coax Outlet on the wall.
Connect one Coax Cable from the Splitter to the Coax In port on the Extender.
Note: If you have a TV or set top box near your modem/router, connect a coax cable from the splitter to the TV or set top box.
Connect the second Power Adapter to the Extender and to a Power Outlet.
Wait until the Power light on the front of the adapter is GREEN.
When the Coax LED is GREEN on both adapters, your adapters are working.