OREI DA34 Digital to Analog Audio Decoder User Manual
- June 5, 2024
- OREI
Table of Contents
Digital to Analog Audio Decoder
USER Manual
Introduction
The Digital to Analog Audio Decoder features an integrated 24-bit audio DSP.
This unit can decode a variety of digital audio formats, including Dolby
Digital (AC3), DTS and PCM. It can simply connect an Optical (Toslink) or
Digital Coaxial Cable to the input, then the decoded audio can be transmitted
as 2-channel analog audio via the Stereo RCA output or the 3.5mm output
(suitable for headphones) simultaneously.
1.1 Features
- Decode Dolby Digital (AC3), DTS, or PCM digital audio to stereo audio output.
- Support PCM 32KHz.44.1KHz,48KHz,96KHz sample frequency audio decode.
- Support Dolby Digital 5.1 samples, DTS-ES6.1 samples audio decode.
- No need to install drivers. Portable, flexible, plug and play.
SPECIFICATIONS
Input Ports: ……………………………….1 x Optical (Toslink), 1 x Digital Coaxial.
Output Ports: ………………………………..1 x RCA (L/R), 1 x 3.5mm (Headphone).
Signal to Noise Ratio:………………… 120db.
Degree of Separation:……………………… 85db.
Frequency Response: (……………….20Hz ~ 20KHz) +/- 0.5db.
Dimensions (mm): …………………………..72(D)x55(W)x20(H).
Weight (g):……………………………………. 40.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Audio Decoder —————1PCS
- 5V/1A DC Adaptor———————-1PCS
- User Manual. ——————-1PCS
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal
input(s), output(s) and power requirements.
-
Connect a source such as a Blu-Ray player, game console, A/V Receiver, etc. to the audio Decoder SPDIF
input by fiber cable or Coaxial input by coaxial cable -
Connect a headphone or analog audio amplifier to the audio output on the Decoder.
Power on the Decoder and select the switch to your needed audio input port.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>