behringer EUROPOWER PMP1680S 1600-Watt 10-Channel Powered Mixer User Guide

Quick Start Guide

EUROPOWER PMP1680S
1600-Watt 10-Channel Powered Mixer with Dual Multi-FX
Processor and FBQ Feedback Detection System

Important Safety Instructions

Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section).No user-serviceable parts inside. Refer servicing to qualified personnel.
Caution
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Use only attachments/accessories specified by the manufacturer.
    

12.  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.

18. Do not install in a confined space, such as a bookcase or similar unit.

19. Do not place naked flame sources, such as lighted candles, on the apparatus.

20.  Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.

21. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas,  Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

EUROPOWER PMP1680S Hook-up

Step 1: Hook-Up

EUROPOWER PMP1680S Hook-up
Step 1: Hook-Up
EUROPOWER PMP1680S Controls
Step 2: Controls
EUROPOWER PMP1680S Controls
Step 2: Controls
EUROPOWER PMP1680S Controls
Step 2: Controls
EUROPOWER PMP1680S Getting started
Step 3: Getting started

1. Make all the appropriate power, audio, and speaker connections to the mixer. Leave the power on all devices off!

2. Select the appropriate operating mode using the POWER AMP switch.

3. Set the controls as shown above (EQ and PAN centered, graphic EQ sliders centered, all others down/off).

4. With the MAIN MASTER knob and MONITOR MASTER knob all the way down, turn your mixer on.

5. Slowly turn the MAIN MASTER knob up 1/3 of the way to start.

6. Adjust the relative level of various microphones and instruments by raising each channel’s LEVEL knob.
   

7. For line-level inputs, press the PAD button to avoid clipping. If a channel’s CLIP LED lights, press the PAD button or turn the LEVEL knob down if the PAD is already engaged.

8. Adjust the left-right position of a channel in the stereo field if necessary by turning the channel’s PAN knob.

9. Use the channel MON knobs to send the channel’s signal to the monitor speaker(s).

10. Adjust the overall output to the main speakers using the MAIN MASTER knob. Adjust the output to the monitor speakers using the MONITOR MASTER knob. If the red CLIP LEDs on either of the METERS light, lower the respective MASTER knob.

11. The PMP series mixers have built-in effects processor(s). Follow these steps to add an effect to one or more channels:

• Turn the FX 1 knob up halfway on each channel that you would like to add an effect to.
• Press the FX 1 IN button to engage the processor.
• Turn the FX RET 1 knob in the MAIN section up halfway to start. You may adjust it later. If you would also like the effect to be heard in the monitor mix, turn the FX RET 1 knob in the MONITOR section up halfway as well.
• Scroll through the effects by turning the PROGRAM knob. Press the PROGRAM knob to select the effect.
• Readjust each channel’s FX 1 knob to make sure the right amount of effect is added.
• If the METER on the multi-FX display reaches the red CLIP LED, turn the channel FX knobs down.
• For the 1680S, repeat the process with the FX 2 and FX RET 2 knobs to add a second effect to various channels. Phantom Power – Move the switch to +48 V when using condenser microphones.

**EUROPOWER PMP1680S Getting started

Stap 3: Aan de slag
Specifications
**

Microphone Inputs

Mic E.I.N. (20 Hz – 20 kHz)

< 10 Hz – > 200 kHz (-3 dB)

Gain| +30 dB, +10 dB with pad
Max. input level| +12 dBu @ +10 dB gain
Impedance| approx. 2.2 kOhm balanced / 1.1 kOhm unbalanced
Signal-to-noise ratio| 110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain)
Noise (THD + N)| 0.001% / 0.0007% A-weighted

Mono Line Inputs

Stereo Line Inputs

Equalizer

CD/TAPE Input

Preamp Outputs MAIN

MONITOR
Type| ¼” TS connectors, unbalanced
Impedance| approx. 150 Ohm, unbalanced
Max. output level| +21 dBu

Stereo Outputs

Loudspeaker Outputs

Load impedance:
MAIN L/R| 4 – 8 Ohm
MONITOR/MAIN MONO| 4 – 8 Ohm
MAIN MONO/MAIN MONO| 4 – 8 Ohm
BRIDGE| 8 – 16 Ohm

DSP

Display

Output Power
RMS @ 1% THD, both channels driven:

RMS @ 1% THD, bridged mode:

Peak Power, both channels driven:
8 Ohm per channel| 400 W
4 Ohm per channel| 800 W
Peak Power, bridged mode:
8 Ohm| 1600 W

Power Supply

Mains voltage

USA/Canada| 120 V~, 60 Hz
China/Korea| 220 V~, 50/60 Hz
Europe/Australia| 230 V~, 50 Hz
Japan| 100 V~, 50 – 60 Hz
Fuse 100 – 120 V~| T 10 A H 250 V
Fuse 220 – 240 V~| T 6.3 A H 250 V

Power Consumption

Dimensions/Weight

Other important information

Important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Behringer
EUROPOWER PMP1680S

EUROPOWER PMP1680S
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC. Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark We Hear You

References

• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>