JUZIHAO TYD-FX-001 Star Projector Galaxy Light User Manual
- June 5, 2024
- JUZIHAO
Table of Contents
TYD-FX-001 Star Projector Galaxy Light
User Manual
PRODUCT PARAMETERS
NOTICE
- Do not look directly into the light source. may cause damage to eyes:
- Please shut off the power immediately When danger occurs:
- Please refer to the respective manual for the projection lamp used;
- The products are commonly limited to use in the indoor environment, especially suitable for use indoors at night;
- The brightness of the stars de the brightness of the laser), which is affected by the temperature of the use environment and the use time. When the ambient temperature is hot or the boot time is longer, the laser brightness will decrease due to heat. At this time. it can be shut down for heat dissipation (the heat dissipation time usually takes more than 15 minutes). The brightness of the stars can be restored by turning it on again;
- A lot of heat is generated when the circuit is working. It will cause the shell to heat up, which is normal;
Host Key Operation Instructions
BLUETOOTH FUNCTION
- Bluetooth is not turned on by default after booting. Short press the “play/pause” button to turn on Bluetooth, and the Bluetooth name is “SKY-lamp’:
- Insert the TF card when the Bluetooth is turned on, the product will directly play TF card music:
- In the state of playing TF card music. if you need to switch to Bluetooth playback mode, please short press the “Play/Pause” button, and then long-press the ‘Flay/Pause’ button to switch to Bluetooth mode and turn on Bluetooth.
PRODUCT PARAMETER
| Material | ABS/PC |
|---|---|
| Laser Wavelength | 532nm |
| LED Power | < 5W |
| Control Mode | Remote control |
| Remote Control Range | < 5meters(Best distance) |
| Power Supply | 100-240V-50/60Hz 0.4A |
| Work Input | 5V=1A |
| Product Size | 150″152*102mm |
| Applicable Environment | Indoor (Best in a dark environment) |
| Working Temperature | -10°-45°C |
| Power cord length | 1.2M |
HOST Key Operation Instructions
Audio input interface: You can access external audio sources to play
music. For example: play music on your phone.
Switch: Short press the switch to turn on the projection lamp. Nebulae
and stars will appear when the lights are turned on. Short press the button
again to shut down.
Nebula switch: Each time you press the button after powering on, the
Nebula will switch a color(A total of 8 modes). The nebula changes back to its
default color after a cycle. Long press the button to close the Nebula, and
short press the button after closing the Nebula to reopen the Nebula.
Stars switch : The stars have three display modes: The first is the
star’s always bright mode. The second is the breathing rate 1 mode of the
stars (the default mode at power-on), and The third is the breathing rate 2
modes of the stars (slightly faster). Each time you press, the star display
will switch to a mode. Long press to turn off the stars. Short press after
closing to turn on the stars again (default mode).
Previous song volume -: Short press the function to enter the previous
song to play the song. Long press the button to decrease the volume.
Play/Pause : Short press the button to play/pause.
Next songNolume+: Short press the function to play the song and enter the
next song. Long press the button to increase the volume.
TF card socket: automatically start playing music after inserting the TF
card.
Remote Control Instructions
Switch: Short press the switch to turn on the projection lamp. Nebulae
and stars will appear when the lights are turned on. Short press the button
again to shut down.
Stars switch : The stars have three display modes: The first is the stars
always bright mode, The second is the breathing rate 1 mode of the stars (the
default mode at power-on), The third is the breathing rate 2 modes of the
stars (slightly faster). Each time you press, the star display will switch to
a mode. Long press to turn off the stars. Short press after closing to turn on
the stars again (default mode).
Nebula Brightness+: There are 5 levels of nebula brightness. The default
brightness is the middle level. Each time you press it, the brightness will
increase by one level. Nebula change speed: The nebula change speed is
divided into five gears 0-1-2-3-4. Level 0 means that the nebula is
stationary. The 4th gear is the fastest-changing speed of Nebula. The default
gear is 2 gears. Each time you press it, the speed of the nebula will decrease
by one level until it reaches level 0.
Nebula color-switching: Each time you press the button, the nebula
switches a color(A total of 8 modes). Return to the default color after one
cycle. Long press the button to turn off Nebula. After closing Nebula, short
press the button to re-open Nebula.
Nebula change speed+: The speed of Nebula changes every time you press it
by one level, up to level 4.
Nebula Brightness-: There are 5 levels of nebula brightness. The default
brightness is the middle level. Each time you press it, the brightness will
decrease by one level.
Timing function: The timing function is divided into two levels, namely
45 minutes and 90 minutes. Press the timing button “45”, the timing indicator
light will light up in blue and accompanied by a beep to enter the 45-minute
timing; press the timing button “90”, the timing indicator will light up in
red, and accompanied by two beeps, enter the 90-minute timing; In the timing
state, the timing indicator light is on; long press to cancel the timing, and
the timing indicator light is off after cancellation
Play/Pause: Short press the button to play/pause.
Previous song volume -: Short press the function to enter the previous
song to play the song. Long press the button to decrease the volume.
Next song/Volume+: Short press the function to play the song and enter
the next song. Long press the button to increase the volume.
Guarantee and support
Thank you for your order and great support for us. We sincerely hope that you
would be satisfied with our product(s) and service.
Of course, if you have any better suggestions or advice for our product. We
are open to hearing any suggestions.
If you have any concerns about our product(s), it would be appreciated if you
would give us a chance to contact us via Email
(support@canpeikit.com), we will get back to you
within 24 hours.
FCC Caution.
This device complies with pan 15 of the FCC Rules. Operation is subject to the
following two conditions: (I ) This device may not cause harmful interference.
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
My (lunge or modifications not expressly approved by the many responsible for
complimwe could void the awes authority to operate the equipment.
:Sole: This equipment has been lased and found to comply with the limits for a
Class Li digital device. pursuant to pan 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does come harmful interference to radio or
television reception. which can he determined by turning the equipment off and
on, the user IS encouraged to try to arced the intaterowe by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on tinnitus different from that to which the receiver is connected.
-Consult the dealer or an experienced radieCTV technician for help.
RF wants for Mobile device. This equipment complies with FCC radiation
exposure lanais set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20cm between the
radiator & your body.
Made in PRC
Do not look directly into the laser
Not a toy.