Husky K40365 1200 LUMEN LED CORDED HANDHELD WORK LIGHT User Guide
- June 5, 2024
- Husky
Table of Contents
Item #XXXX XXX XXX
Model #K40365
USE AND CARE GUIDE
1200 LUMEN LED CORDED HANDHELD WORK LIGHT
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday
9 a.m. – 6 p.m., EST, Saturday
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the
purchase of this handheld work light. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your Home Improvement needs. Thank you for choosing
Husky!
Safety Information
Read and understand all Safety and Operating instructions in this manual before using this product.
DANGER: BE EXTREMELY CAREFUL WHEN USING THIS DEVICE. Improper use of this work light can result In injury or death.
WARNING: Failure to observe the following safety rules may result in FIRE, ELECTRICAL SHOCK, OR INJURY.
- Please consult a qualified electrician for installation.
- Voltage: 120V AC: Frequency: 60Hz; Current: 0.13A
SAVE THESE INSTRUCTIONS.
FCC STATEMENT
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment
NOTICE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there Is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user Is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment Into an outlet on a circuit different from that to
which the receiver Is connected.
– Consult the dealer or an experienced radio/iV technician for help.
Warranty
The manufacturer warrants the products to be free from defects In materials
and workmanship for a period of three (3) years from the date of purchase. We
take pride in the design and construction of each of our products and work to
maintain the quality of our materials and craftsmanship to assure your
satisfaction.
If any problems appear, the purchaser may return the item, freight prepaid,
together with a copy of your original purchase receipt to the place of
purchase and it will be replaced with the same or comparable model free of
charge. This warranty does not cover fixtures that have been altered in any
way; It is void if damage or defect has resulted from accident, abuse, misuse,
or faulty repair.
In no event will the manufacturer be liable for any incidental or
consequential damages. No charge will be acceptable for unauthorized repairs,
parts, or services. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above exclusion or limitation of
incidental or consequential damages may not apply to you. Legal warranty
rights will vary from state to state and you may have other rights.
Contact the Customer Service Team at 1-888-43-HUSKY or visit
www.HUSKYTOOLS.com.
Pre-Installation
PACKAGE CONTENTS 
| Part | Description |
|---|---|
| A | LED light |
| B | Auxiliary receptacle |
| C | Power cord |
| D | ON/OFF button |
| E | Hook |
| F | Magnets |
Operation
Using the work light
- Insert the 3-prong plug into a grounded receptacle.
- Press the On/Off button (D) in the ( ) position to turn the work light on for 100% brightness (1200 lm).
- Press the On/Off button (D) in the ( ) position to turn the work light on for 50% brightness (600 lm).
- Press the On/Off button (D) in the ( )position to turn the work light off.
- (Optional) Use the hook (E) to hang the work light from a hook or structural support. Use the magnets to attach the work light to a metal surface.
Care and Cleaning
WARNING: Always make sure that the work light is unplugged and cooled down before attempting to clean it.
- Clean the work light with a non-abrasive cleaner.
- Allow the work light to cool down completely before storing.
- Store in a safe place, out of the reach of children.
Troubleshooting
If the work light does not work, check the following:
- Verify that the light is properly plugged into the power source.
- Verify that the switch is in the ON position.
Questions, problems, missing parts? Before returning to the
store,
call Husky Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday
9 a.m. – 6 p.m., EST, Saturday
1200 LUMEN LED CORDED
HANDHELD WORK LIGHT
Model # K40365
THE HOME DEPOT
2455 PACES FERRY ROAD
ATLANTA, GA 30339
1-888-HD-HUSKY
HUSKYTOOLS.COM
Retain this manual for future use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>