LUXPRO PACK740 Compact Waterproof LED Headlamp User Manual
- June 5, 2024
- LUXPRO
Table of Contents
LUXPRO PACK740 Compact Waterproof LED Headlamp Features
- Durable ABS and rubberized
- compact design LPE Optics
- Dual button intuitive mode selection
- Non-slip adjustable headband
- IPX7 Waterproof
- Soft, reflective headband
Operation Instructions
- Right Button: Spot LED On/Off
- Quick Press = Spot High On/Off
- 2 second press from any mode = High+ mode
- Left Button: Cycle all modes / last mode recall
- Quick Press from Off position = Last mode recall
- Quick Press from any mode = Cycle through modes
- 2 second Press = Strobe On/Off any mode
Usage and Maintenance
Battery Replacement: In a dry environment, locate the two clear plastic tabs along the side of the headlamp housing. Gently, push tabs outward using both thumbs. The battery cover will pop up and seperate from the main headlamp housing. Remove old batteries. Insert new batteries into the designated battery slots, follow-ing the symbols for proper arrangement. To reinstall the battery cover, take note to match the clear tabs on the main housing to the proper orientation on the battery cover, then carefully reinstall the battery cover to the headlamp housing by gently pressing the two together. Check that a proper seal has been made by firmly hold-ing the housing in one hand and gently pulling against the headband hinge with the other hand.Care Instructions: If you know it’s going to be a while between uses, we suggest removing batteries from your light and storing your gear in a dry, protected place.
Product Warranty
Limited 1 year Warranty against manufacturer’s defects from time of purchase. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleproducts.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>