LUXPRO BROADBEAM323 Multi-color LED Headlamp User Manual
- June 5, 2024
- LUXPRO
Table of Contents
LUXPRO BROADBEAM323 Multi-color LED Headlamp
ANSI/PLATO FL1 STANDARD
Features
- Durable ABS and rubberized compact design
- LPE Optics, Multi-color COB LED area light
- Dual button intuitive mode selection
- Non-slip adjustable headband
- IPX4 Waterproof
- Battery: 3 AAA
Operation Instructions
Right Button: Spot LED Modes
Quick Press = On/Cycle Modes/Off
2-second press from any mode = High+ Mode
Left Button: Flood Modes / Strobe
Quick Press = On/Cycle Modes/Off
2 second Press = Strobe On/Off any Mode
Usage and Maintenance
Battery Replacement: In a dry environment, locate the two plastic tabs along
the side of the headlamp hous-ing. Gently, push tabs outward using both
thumbs. The battery cover will pop up and seperate from the main headlamp
housing. Remove old batteries. Insert new batteries into the designated
battery slots, following the symbols for proper arrangement. To reinstall the
battery cover, take note to match the two tabs on the main housing to the
proper orientation on the battery cover, then carefully reinstall the battery
cover to the headlamp housing by gently pressing the two together. Check that
a proper seal has been made by firmly hold-ing the housing in one hand and
gently pulling against the headband hinge with the other hand.
Care Instructions: If you know it’s going to be a while between uses, we
suggest removing batteries from your light and storing your gear in a dry,
protected place.
Product Warranty
Limited 1-year Warranty against manufacturer’s defects from time of purchase. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleproducts.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>