LUXPRO LP1036 High-Output Small Handheld Flashlight User Manual
- June 5, 2024
- LUXPRO
Table of Contents
LUXPRO LP1036 High-Output Small Handheld Flashlight
Features
- Durable aluminum construction
- Long range LPE Optics
- TackGrip molded rubber grip
- Heavy duty flashlight
- Ergonomic side button
- O-ring sealed, IPX6
- 4 Modes: High/Medium/Ultra Low/Hidden Strobe Runs on 6 or 3 AAA alkaline batteries
Operation Instructions
- On/Off: Press and release the button
- Cycle modes: From High mode, press the button to cycle through modes within 2 seconds (High/Medium/Ultra Low).
- Hidden strobe On/Off: Hold button for 3 seconds to activate, and deactivate hidden strobe.
- Automatically resets ‘next click’ to Off when on for lon-ger than 3-5 seconds.
- Automatically resets to High mode when turned off.
Usage and Maintenance
Battery Replacement: In a dry environment, unscrew the tailcap by turning
counterclockwise. Remove batteries. Insert the new batteries into the tubes
according to the symbols (+-/) marked on the light. Carefully reinstall the
tailcap by pressing lightly while turning clockwise.
Care Instructions: If you know it’s going to be a while between uses, we
suggest removing batteries from your light and storing your gear in a dry,
protected place.
ANSI/PLATO FL1 STANDARD
Product Warranty
Limited Lifetime Warranty against manufacturer’s defects. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleprod-ucts.com.
866.553.8886
14725 S Porter Rockwell Blvd Ste C Bluffdale, UT 84065
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>