Cylinda K3385NVE 380 Liters Volume Refrigerator User Manual

User manual

K3385NVE
K3385NHE

BEFORE USING YOUR FRIDGE

General warnings

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: In order to avoid any hazards resulting from the instability of the appliance, it must be fixed in accordance with the following instructions:
WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.

SYMBOL ISO 7010 W021
Warning: Risk of fire / flammable materials

• If your appliance uses R600a as a refrigerant (this information will be provided on the label of the cooler) you should take care during transportation and installation to prevent the cooler elements from being damaged. R600a is an environmentally friendly and natural gas, but it is explosive. In the event of a leak due to damage to the cooler elements, move your fridge away from open flames or heat sources and ventilate the room where the appliance is located for a few minutes.

• While carrying and positioning the fridge, do not damage the cooler gas circuit.

• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

• This appliance is intended to be used in household and domestic applications such as:
  – staff kitchen areas in shops, offices, and other working environment.
  – farmhouses and by clients in hotels, motels, and other residential type environments.
  – bed and breakfast type environments;
  – catering and similar non-retail applications.

• If the socket does not match the refrigerator plug, it must be replaced by the manufacturer, a service agent, or similarly qualified persons in order to avoid a hazard.

• A specially grounded plug has been connected to the power cable of your refrigerator. This plug should be used with a specially grounded socket of 10 amperes. If there is no such socket in your house, please have one installed by an authorised electrician.

• Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. Children are not expected to perform cleaning or user maintenance of the appliance, very young children (0-3 years old) are not expected to use appliances, and young children (3-8 years old) are not expected to use appliances safely unless continuous supervision is given, older children (8-14 years old) and vulnerable people can use appliances safely after they have been given appropriate supervision or instruction concerning use of the appliance. Very vulnerable people are not expected to use appliances safely unless continuous supervision is given.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• If the supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or similarly qualified persons, in order to avoid a hazard.

• This appliance is not intended for use at altitudes exceeding 2000 m.
  To avoid contamination of food, please respect the following instructions:

• Opening the door for long periods can cause a significant increase in the temperature in the compartments of the appliance.

• Clean regular surfaces that can come in contact with food and accessible drainage systems.

• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.

• Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream, and making ice cubes.

• One-, two- and three-star compartments are not suitable for the freezing of fresh food.

• If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mold from developing within the appliance.

The water dispenser is available

• Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days.

Old and out-of-order fridges

• **** If your old fridge has a lock, break or remove the lock before discarding it, because children may get trapped inside it and may cause an accident.
• Old fridges and freezers contain isolation material and refrigerant with CFC. Therefore, take care not to harm the environment when you are discarding your old fridges.

Please ask your municipal authority about the disposal of the WEEE for reuse, recycling, and recovery purposes.

Notes:

• Please read the instruction manual carefully before installing and using your appliance.
  We are not responsible for the damage that occurred due to misuse.

• Follow all instructions on your appliance and instruction manual, and keep this manual in a safe place to resolve the problems that may occur in the future.

• This appliance is produced to be used in homes and it can only be used in domestic environments and for specified purposes. It is not suitable for commercial or common use. Such use will cause the guarantee of the appliance to be canceled and our company will not be responsible for the losses to have occurred.

• This appliance is produced to be used in houses and it is only suitable for cooling / storing foods. It is not suitable for commercial or common use and/or for storing substances except for food. Our company is not responsible for the losses to occur in the contrary case.

Safety warnings

• Do not use multiple receptacles or extension cords.

• Do not plug in damaged, torn, or old plugs.

• Do not pull, bend or damage the cord.

• This appliance is designed for use by adults, do not allow children to play with the appliance or let them hang off the door.

• Do not plug in or out the plug from the receptacle with wet hands to prevent electrocution!

• Do not place explosive or flammable material in your fridge for your safety. Place drinks with higher alcohol amounts vertically and by closing their necks tightly in the fridge.

• Do not cover the body or top of the fridge with lace. This affects the performance of your fridge.

• Fix the accessories in the fridge during transportation to prevent damage to accessories.

• Do not use a plug adapter.

• When the door of the cooler is closed, a vacuum seal will form. Wait for about 1 minute before reopening it.

• This application is optional for easy opening of the door. With this application, a little condensation may occur around this area and you may remove it.

Installing and Operating your Fridge
Before starting to use your fridge, you should pay attention to the following points:

• The operating voltage for your fridge is 220-240 V at 50Hz.

• We do not take responsibility for the damages that occur due to ungrounded usage.

• Place your fridge in a place where it would not be exposed to direct sunlight.

• Your appliance should be at least 50 cm away from stoves, ovens, and heater cores, and should be at least 5 cm away from electrical ovens.

• It should never be used outdoors or left in the rain.

• When your fridge is placed next to a deep freezer, there should be at least 2 cm between them to prevent humidity on the outer surface.

• Do not place anything on your fridge, and install your fridge in a suitable place so that at least 5 cm is available on the upper side.

• If you will place your fridge next to your kitchen cabinets, leave a space of 2 cm between them.

• Fit the plastic wall spacers to the condenser at the back of the refrigerator in order to prevent leaning to the wall for good performance.

• Install the distance adjustment plastic (the part with black vanes at the rear) by turning it 90° to prevent the condenser from touching the wall.

• The refrigerator should be placed against a wall with a free distance not exceeding 75 mm.

• The adjustable front legs should be stabilized at an appropriate height to allow your fridge to operate in a stable and proper way. You can adjust the legs by turning them clockwise (or in the opposite direction). This should be done before placing food in the fridge.

• Before using your fridge, wipe all parts with warm water added with a teaspoonful of sodium bicarbonate, and then rinse with clean water and dry. Place all parts after cleaning.

Before Using your Fridge

• When it is operated for the first time or after transportation, keep your fridge in the upright position for 3 hours and plug it on to allow efficient operation. Otherwise, you may damage the compressor.
• Your fridge may have a smell when it is operated for the first time; the smell will fade away when your fridge starts to cool.

Information on No-Frost Technology

No-frost refrigerators differ from other static refrigerators in their operating principle.
In normal refrigerators, the humidity entering the refrigerators due to opening the door and the humidity inherent in the food causes freezing in the backside of the air duct. To defrost the frost and ice in the backside of the air duct, you are periodically required to turn off the refrigerator and place the food that needs to be kept cool in a separately cooled. The situation is completely different in no-frost refrigerators.
Dry and cold air is blown into the refrigerator compartment homogeneously and evenly from several points via a blower fan. Cold air dispersed homogeneously and evenly between the shelves cools all of your food equally and uniformly, thus preventing humidity and freezing. Therefore your no-frost refrigerators allow you ease of use, in
addition to its huge capacity and stylish appearance.

USAGE INFORMATION

Display control panel

1. Fridge compartment temperature setting indicator.
2. Supercooling indicator.
3. Economy mode symbol.
4. Alarm / Service calling symbol.
5. Child lock symbol.
6. It allows you to change the temperature values of the fridge compartment. The temperature value of the fridge compartment can be set to 2, 4, 5, 6, or 8°C.
7. Supercooling mode set button.
8. Mode button that activates economy mode.

Lighting (If available)
When the product is plugged in for the first time, the interior lights may turn on 1 minute late due to opening tests.

Operating the Fridge Super Cooling Mode

How to use

• Press the “super” button to activate the supercooling symbol.
• When set to super cooling mode, the buzzer emits a “beep” sound.
• When this mode is selected, the temperature value that was set before mode selection will be displayed on the fridge temperature indicator.

In the mode:

• An economy mode cannot be selected.
• You can press the fridge temperature setting button again or press the “super” button to deactivate the super cooling mode.

NOTE: Depending on the ambient temperature, the supercooling mode will automatically be canceled after 5 hours or when the fridge has reached the required temperature.

Economy Mode

How to use

• Press and hold the mode button until the economy mod symbol appears.
• If you do not press any other button within 1 second, the economy mode will be selected, the economy mode symbol will blink 3 times and a beep will be heard.
• While the economy mode is selected, “E” will be displayed on the fridge compartment temperature indicator.

In the mode:

• The supercooling mode can be selected. In this case, the economy mode will be canceled automatically and the selected mode will be activated.
• If you do not press any other button within 1 second after pressing the mode button, this mode will be canceled.

Screen Saving Mode

How to use

• If you press and hold the mode button for 3 seconds, screen saving mode will be activated.
• If you do not press any other button within 5 seconds after activating the screen saving mode, the lights of the control panel will go off.
• If you press any key while the lighting of the control panel is off, current settings will appear on the display to let you make any change you wish. If you do not cancel the screen saving mode or press any key for 5 seconds, the control panel will go off again.
• To cancel the screen saving mode, first of all, you need to press any key to activate the keys and then press and hold the Mode button again for 3 seconds.
• When the screen saving mode is activated, you can activate the child lock function.
• If you do not press any other button within 5 seconds after activating the child lock, the lights of the control panel will go off. After that, the preset values will be displayed and if you press any button, the child lock symbol will appear. You can press and hold the “super” and Fridge setting buttons for 5 seconds to cancel the child lock.

Activating the Child Lock

When to use
The appliance is equipped with a child lock function to prevent children from playing with the buttons and changing the settings you have made.

Activating the Child Lock

• Press and hold Super and Fridge temperature setting buttons simultaneously for 5 seconds.
• After the mode has been selected, the lock symbol will appear on the display.

Deactivating the Child Lock
Press and hold Super and Fridge temperature setting buttons simultaneously for 5 seconds.

Door open alarm function
If the cooler door is opened for more than 2 minutes, the appliance sounds ‘beep beep’.

Fridge Temperature Settings

• The initial temperature value of the fridge compartment temperature indicator is 5°C.
• Press the fridge temperature setting button once.
• When you press this button for the first time, the most recent value on the fridge compartment temperature indicator will flash.
• Each press on this button will set the value to a lower degree: (2, 4, 5, 6, 8°C)
• If you keep pressing, it will restart from 2°C.
• The temperature value selected before activating the fast cooling mode or eco mode will remain the same once this mode has been completed or canceled. The appliance will go on operating at these set temperature values.

Recommended Temperature Settings for Fridge

Warnings About Temperature Settings

• Do not switch to another adjustment before completing a set.

• The temperature setting should be done by taking into consideration how often the fridge door is opened and closed, how much food is stored in it, and the ambient temperature at which the fridge is located.

• Depending on the ambient temperature, your fridge must operate nonstop for up to 24 hours in order to cool down completely after it is plugged in for the first time. During this period, do not open the doors of your fridge frequently and do not overfill.

• To prevent any damage to the compressor of your fridge when you want to restart your fridge after unplugging it or after a power failure is restored, there is a function
  that makes your fridge operate after a 5-minute delay. Your fridge will start operating normally after 5 minutes.

• Fridge has been designed to operate in the ambient temperature ranges specified in the standards according to the class of climate mentioned in the information label. The
  operation of the fridge in environments with temperature values not complying with the ones specified is not recommended for cooling efficiency.

• Your appliance is designed to operate at ambient temperatures between 10°C – 43°C.

Climate class and meaning:
T (tropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C.
SN (extended temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C.

If turbofan is available on your product ;

Do not block air inlet and outlet openings when storing food, otherwise, air circulation provided by turbofan will be impaired.

Accessories
Chiller shelf (In some models)

Keeping food in the Chiller compartment instead of the freezer or refrigerator compartment allows food to retain freshness and flavor longer while preserving its fresh appearance. When the chiller tray becomes dirty, remove it and wash it with water. (Water freezes at 0°C, but foods containing salt or sugar freeze at a temperature lower than that)

Normally people use the chiller compartment for raw fish, lightly pickled, rice, etc…

! Do not put foods you want to freeze or ice trays in order to make ice.

Removing the Chiller shelf

• Pull the chiller shelf out toward you by sliding on rails.
• Pull the chiller shelf up from the rail to remove it.

When the humidity controller is in the closed position, it allows fresh fruit and vegetables to be stored longer.
In case of the crisper is totally full, the fresh dial is located in front of the crisper, and should be opened. By means of this, the air in the crisper and humidity rate will be controlled and endurance life will be increased.

If you see any condensation on the glass shelf, humidity control should be taken into the open positions.

Visual and text descriptions on the accessories section may vary according to the model of your appliance.

ARRANGING FOOD IN THE APPLIANCE

• For normal operating conditions, adjusting the temperature value of the cooler partition of the fridge to 4°C will be enough.

• To reduce humidity and consequent increase of frost never place liquids in unsealed containers in the refrigerator. Frost tends to concentrate in the coldest parts of the
  evaporator and in time will require more frequent defrosting.

• Never place warm food in the refrigerator. Warm food should be allowed to cool at room temperature and should be arranged to ensure adequate air circulation in the
  refrigerator compartment.

•  Nothing should touch on the back wall as it will cause frost and the packages can stick on the back wall. Do not open the refrigerator door too frequently.

• Arrange the meat and cleaned fish(wrapped in packages or sheets of plastic) which you will use in 1-2 days, in the bottom section of the refrigerator compartment(that is above the crisper) as this is the coldest section and will ensure the best-storing conditions.

• You can put the fruits and vegetables into a crisper without packing them.

• For normal working conditions, it will be sufficient to adjust the temperature setting of your refrigerator to +4 °C.

• The temperature of the fridge compartment should be in the range of 0-8 °C, fresh foods below 0 °C are iced and rotted, bacterial load increases above 8 °C, and spoils.

• Do not put hot food in the refrigerator immediately, wait for the temperature to pass outside. Hot foods increase the degree of your refrigerator and cause food poisoning
  and unnecessary spoiling of the food.

• Meat, fish, etc. should be stored in the chiller compartment of the food, and the vegetable compartment is preferred for vegetables. (if available)

• To prevent cross-contamination, meat products, and fruit vegetables are not stored together.

• Foods should be placed in the refrigerator in closed containers or covered to prevent moisture and odors.
  NOTE: Potatoes, onions, and garlic should not be stored in the refrigerator.

Food| Maximum Storing time| Where to place in the fridge department
---|---|---
Vegetables and fruits| 1 week| Vegetable bin
Meat and fish| 2 – 3 Days| Wrapped in plastic foil or bags or in a meat container (on the glass shelf)
Fresh cheese| 3 – 4 Days| On a special door shelf
Butter and margarine| 1 week| On a special door shelf
Bottled products milk and yogurt| Until the expiry date recommended by the producer| On a special door shelf
Eggs| 1 month| On the egg shelf
Cooked food| | All shelves

CLEANING AND MAINTENANCE

| | | | |
---|---|---|---|---|---

• Disconnect the unit from the power supply before cleaning.
• Do not clean the appliance by pouring water.
• The refrigerator should be cleaned periodically using a solution of bicarbonate of soda and lukewarm water
• Clean the accessories separately with soap and water. Do not clean them in the washing machine.
• Do not use abrasive products, detergents, or soaps. After washing, rinse with clean water and dry carefully. When the cleaning operations have been completed reconnect the plug of the unit with dry hands.
• You should clean the condenser (back of the appliance) with a broom once a year in order to provide energy-saving and increase productivity.

THE POWER SUPPLY MUST BE DISCONNECTED.

Replacing LED Lighting

If your fridge has LED lighting contact the help desk as this should be changed by authorized personnel only.

SHIPMENT AND REPOSITIONING

• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with the thick package, bands, or strong cords and follow the instructions for transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories, vegetable bins, etc.) or fix them into the fridge against shocks using bands during re-positioning and transportation.

! Carry your fridge in the upright position.

Repositioning the door

• It is not possible to change the opening direction of your fridge door if the door handles on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your fridge may be changed, you should contact the nearest Authorized Service to have the opening direction changed.

BEFORE CALLING SERVICE

Control warnings:
If the temperatures of the fridge are not at the suitable levels or if there is a problem with the appliance, your fridge will warn you. Warnings are indicated by warning codes on the fridge compartment indicators on the indicator panel.

fail or there is a problem in the cooling system.
The product is plugged in for the first time or a longtime power interruption for 1 hour.| Check if the door is open or not and check if the product working for 1 hour. If the door is not open and the product had worked 1 hour, call service for assistance as soon as possible.
[Sr] blinks on the fridge set value display| The fridge is not cold enough.| This warning appears if there has been a power failure for a long period and when the fridge is operated for the first time.| Temporarily increase the cooling temperature setting to the desired level or switch the appliance to fast cooling mode.

Do not open/close the doors of the product frequently until the problem is eliminated.

[Sr] blinks on the fridge set value display| The fridge Compartment is very cold| It means that the fridge compartment cools excessively and the food in the compartment starts freezing.| – Make sure that the appliance is not in the fast cooling mode
– Decrease the fridge compartment temperature value (set it to a warmer value)
[–] is displayed on the fridge set value.| Low voltage warning| Fridge switches to the standby mode when the voltage supply falls below 170 Volts.| This feature prevents the compressor from getting damaged due to low voltage. The fridge will start operating automatically when the voltage restores to the required level.

If your fridge is not working properly, it may be a minor problem, therefore check the following, before calling an electrician to save time and money.

What to do if your appliance does not operate;
Check that;

• There is no power,
• The general switch in your home is disconnected,
• The socket is not sufficient. To check this, plug in another appliance that you know is working into the same socket.

What to do if your appliance performs poorly;
Check that;

• You have not overloaded the appliance,
• The fridge temperature is set to 2.
• The door is closed perfectly,
• There is no dust on the condenser,
• There is enough place at the rear and sidewalls.

If your fridge is operating too loudly;
Normal Noises
Short cracking: Heard when the thermostat switches the compressor on/off.
Compressor noise: Normal motor noise. This noise means that the compressor operates normally Compressor may cause more noise for a short time when it is activated.
Bubbling noise and splash: This noise is caused by the flow of the refrigerant in the tubes of the system.
Water flow noise: Normal flow noise of water flowing to the evaporation container during defrosting. This noise can be heard during defrosting.
Air Blow Noise: Normal fan noise. This noise can be heard in fridges during normal operation of the system due to the circulation of air.

If the edges of the fridge cabinet that the door joint contact are warm;
Especially in summer (hot weather), the surfaces that the joint contact may get warmer during the operation of the compressor, this is normal.

If humidity builds up inside the fridge;

• Is all food packed properly? Are the containers dried before placing them in the fridge?
• Is the fridge door opened frequently? Humidity of the room gets in the fridge when the door is opened. Humidity build-up will be faster when you open the door more frequently, especially if the humidity of the room is high.

If the door is not opened and closed properly;

• Do the food packages prevent the closing of the door?
• Are the door compartments, shelves, and drawers placed properly?
• Are door joints broken or torn?
• Is your fridge on a level surface?

IMPORTANT NOTES:

• The compressor protection function will be activated after sudden power breakdowns or after unplugging the appliance because the gas in the cooling system is not stabilized yet. Your appliance will start after 5 minutes, there is nothing to worry about.
• If you will not use your fridge for a long time (e.g. in the summer holidays) unplug it. Clean your fridge according to chapter “CLEANING AND MAINTENANCE” and leave the door open to prevent humidity and smell.
• To stop the appliance completely, unplug from the main socket (for cleaning and when the door is left open)
• If the problem persists after you have followed all the instructions above, please consult the nearest Authorized service.
• The lifetime of your appliance stated and declared by the Department of the Industry is 10 years (the period for retaining parts required for the proper functioning of the appliance).

Tips for saving energy

1. Install the appliance in a cool, well-ventilated room, but not in direct sunlight and not near a heat source (radiator, cooker.. etc). Otherwise use an insulating plate.
2. Allow ward food and drinks to cool down outside the appliance.
3. When placing, drinks and slops they must be covered. Otherwise, humidity increases at the appliance. Therefore the working time gets longer. Also covering drinks and slops helps to save smell and taste.
4. When placing food and drinks, open the appliance door as briefly as possible.
5. Keep close the covers of any different temperature compartment in the appliance (crisper, chiller …etc ).
6. The door gasket must be clean and pliable. Replace gaskets if worn.

THE PARTS OF THE APPLIANCE AND THE COMPARTMENTS

This presentation is only for information about the parts of the appliance.
Parts may vary according to the appliance model.

1. Turbofan *
2. Wine rack/bottle shelf *
3. Refrigerator shelves
4. Top crisper / Chiller shelves *
5. Bottom crisper cover
6. Bottom crisper
7. Leveling feet
8.  Bottle shelf
9.  Door shelves
10. Egg holder

• In some models

General notes:
Fresh Food Compartment (Fridge): Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance, and shelves evenly
distributed, the position of door bins does not affect energy consumption.

TECHNICAL DATA

The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of
the appliance.
See the link www. the energy label. eu for detailed information about the energy label.

 INFORMATION FOR TEST INSTITUTES

Appliance for any EcoDesign verification shall be compliant with EN 62552.
Ventilation requirements, recess dimensions, and minimum rear clearances shall be as stated in this User Manual at Chapter 2. Please contact the manufacturer for any other
further information, including loading plans.

CUSTOMER CARE AND SERVICE

Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, Serial Number, and Service Index.
The information can be found on the rating plate. Subject to change without notice.
The original spare parts for some specific components are available for a minimum of 7 or 10 years, based on the type of component, from the placing on the market of the last unit of the model.

Visit our website to:

|
---|---
|
|
|
|
|
|
|
|
|
|

Service: Nationwide service In
Sweden
Vst www.cylnda.se
Call 0771-25 25 00
Declare: Model code, Seral number, Purchase date, Problem description, Name, and address, Phone number
Contact us: www.cylnda.se

52319065
Elektroskanda Sverge AB, Cylnda, 191 83 Sollentua

References

• Prisvärda svenska vitvaror- Cylinda - En enklare vardag

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>