XPOtool 62441 Outdoor Power Socket User Manual
- June 5, 2024
- XPOtool
Table of Contents
XPOtool 62441 Outdoor Power Socket
The information contained in this document may alter at any time without
previous notice. It is prohibited to copy or spread any parts of this document
in any way without prior written allowance. All rights re-served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible
mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible
efforts to ensure that the operating manual is complete, faultless, and up to
date, mistakes cannot be entirely avoided. If you should find a mistake or
wish to make a suggestion for improvement, we look forward to hearing from
you.
Contact US
Send an e-mail to: service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in
our online shop via: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Germany
To return orders for exchange, repair, or other purposes, please use the
following address. Attention! To allow for a smooth execution of your
complaint or return, it is important to contact our customer service team
before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury
we urge that our clients take some basic safety precautions when using this
device. Please read the operation instruc-tions carefully and make sure you
have understood its content.
Keep these operation instructions safe.
General description
This socket is designed for the household. It fulfills the splash water protection requirements (protection class IP44). This product is not suitable for use on construction sites or other environments with harsh operating conditions.
Safety precautions and instructions
- Upon receipt of the product, ensure that no part is damaged or missing. Read the instructions and especially the safety instructions carefully before using the device.
- This product can only be connected to a protective contact socket that is earthed.
- The socket must be placed in a stable place and horizontally or vertically.
- Make sure that the socket-outlet is not inserted into a recess; rain can cause the socket to stand in, which must be avoided at all means.
- The socket-outlet must be installed at least 0.5 m from each water point.
- This socket is designed in such a way that it is protected against splashing water.
- If you want to relocate the socket, you must first disconnect it from the power supply before branching it off.
- If the housing of the product is damaged (e.g., by impacts) and the product can no longer meet the requirements of IP44, it must no longer be used.
- The socket may only be used in an upright position. If it is not upright any longer, you must check whether water has already penetrated the product before use. If water has got into the socket, it must not be used.
Technical specifications
Voltage (V)| Frequency (㎐)| Max. amperage per socket (A)|
Protection class
---|---|---|---
220–240| 50| 16| IP44
Commissioning
- Connect the cable of the product to the power connector.
- Turn on the corresponding switches for the sockets and select the desired function. If the switch of a socket is on “I,” the socket is switched on (live). If the switch of a socket is on “O,” the socket is switched off.
Figures concerning structure and mounting
Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE,
2012/19/EU) were implemented in the law related to electrical and electronic
equipment and appliances.
All WilTec electric devices that fall under the WEEE regulations are labeled
with the crossed-out wheeled waste bin logo. This logo indicates that this
electric equipment must not be disposed of with domestic waste.
The company WilTec Technik GmbH has been registered in the German registry EAR
under the WEEE-registration number DE45283704.
Disposal of used electrical and electronic appliances (intended for use in the
countries of the European Union and other European countries with a separate
collection system for these appliances).
The logo on the article or on its packaging points out that this article must
not be treated as normal household waste but must be disposed to a recycling
collection point for electronic and electrical waste equipment. By
contributing to the correct disposal of this article you protect the
environment and the health of your fellow men. Environment and health are
threatened by inappropriate disposal.
Material recycling helps reduce the consumption of raw materials.
Additional information on recycling this article can be provided by your local
community, municipal waste disposal facilities, or the store where you
purchased the article.
Address:
WilTec Wildanger Technik GmbH Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in
part, of this instruction manual require the written permission of WilTec
Wildanger Technik GmbH.
https://www.XPOtool.com The Tool Experts
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>