IEBELONG Google Home App User Guide
- June 5, 2024
- iEBELONG
Table of Contents
IEBELONG
Google Home App User Guide
Note: We would recommend naming the devices in your Kinect Switch app something that is easy for Google to understand.
In order to integrate the Kinect Switch app with Google Home you need:
- Google Home APP
- Google Home account (users need to register their own account)
- Google Home, Google Home Mini, or other Google voice-operated devices.
**Link Kinec Switch account to Google Home and add Smart Life skills to
Google Home**
Tap the “+” in the top left corner of the Google Home app to set up the new
device.
Tap “Setup Device” and from the list choose “Works with Google”.
This will open the Skills window where we will search for Smart Life skills.
Find “Smart Life” in the list. In the new window, select your country from the
drop-down. Then input the user name and password that you had previously used
to register on the Kinect Switch App and tap “Link Now”.
Google Home account will be now linked with your Kinect Switch account.
After you assign rooms for devices, your devices will be listed on the Home
Control page.
Control your WiFi Controller / Socket Adaptor through Google Home
After the Smart Life action registration is successful you can start to control your devices via Google Home.
Control devices by Voice:
Voice control can be used now to control the Wifi device. The supported voice
commands are as below:
“Ok Google, turn on/off [bedroom light].”
“Ok Google, set [bedroom light] to 50 percent.”
“Ok Google, brighten/dim [kitchen light].”
“Ok Google, turn on [phone charger].”
“Ok Google, turn off [heater].”
Please note: The name of the device you use for Voice Control must be the same name as the device on the Kinetic Switch app. If necessary, we would recommend renaming your devices so they are easy for Google to understand.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>