iEBELONG K1 Series Push Button Style Kinetic Energy Switch Instructions
- June 5, 2024
- iEBELONG
Table of Contents
iEBELONG K1 Series Push Button Style Kinetic Energy Switch Product
Description
The K1 series switch is a push button style kinetic energy switch that uses
micro-energy acquisition technology without battery. It can be paired with
controllers lo work. If it is paired
with a dimmable controller, you can turn on/off /dim the lights.
Product Parameters
- Product Series: K1 Series
- Work Type: Push Button Type
- Number of keys: 1 keys
- Power Supply: Self-powered(No battery)
- Working Frequency: 433MHz
- Communication Protocol: Ebelong1 .1
- Working Temperature: -20° C~+55° C
- Control Distance: 80m (outdoor) 25m (indoor)
- Executive Standard: Q/EBL01-2018
- How to use: Pairing with Wireless Receiving Controller Precautions
- The K1 switch is an electronic product. Please prevent liquid intrusion during use, the K1 switch is washed with waler.
Pair with Controller
The K1 series switches need to be paired with a wireless controller. The
ordinary pairing method is to press and hold the controller
“pairing key” for about 3 seconds, release the pairing key” button when the
indicator light flashes, and then press a button of the K1 switch once. The
indicator light goes off, which means that the pairing is successful. Then you
can control the wireless controller by this button.(more detailed steps,please
refer lo the receiving controller instruction)
If the controller is a dimmable model and the dimming mode is
on, long press on the paired button to dim the brightness circularly and
remember the brightness when you turn on the light again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>