FlipStore i12 True Wireless Stereo Earphones User Manual

FlipStore i12 True Wireless Stereo Earphones

Specifications

True wireless stereo (TWS), real no wires design, individual left and right channels, HIFI sound

Headphone use steps and special instructions

1. Tum on the charging box switch (blue or red light is on)
2. Open the top cover of the charging box and take out the earphones.
3. Important note: Tum on the charging box switch before opening the charging box, which is the premise of the headset automatically turning on)
4. The headset is placed in the charging box to enter the charging mode, and the headset is automatically turned off.
5. i12 Tws wireless headphones can be connected separately
6. .i12 Tws wireless headset will automatically shut down if is not connected to the device for 5 minutes.

Headphone touch function description

1. Touch position of left ear and right ear and touch 1 to answer the phone; long press volume of the left earphone to decrease; long press volume of the right earphone to increase; connect the left ear to the next tune; continuously press 3 on the right ear, long-press the last tune for 3 seconds; double click the SIRI function to wake up the voice assistant. Play, pause the music and press the button once. Answer the call, press the button once under the call status; Hang up the phone and press the button once for call status; Reject, call status long-press the button for 2 seconds.
2. After turning off the phone, the headset will automatically connect back to the phone
3. The whole machine has voice prompts;
4. The earphones have sounds for the left and right ears of the two-channel conversation;
5. Headphone music playback time is about 2-3 hours, talk time is about 4 hours, and standby time is about 6 hours;
6. The charging battery capacity is 300AH, and the headphone battery capacity is 35mAh;
7. Charging time is 70 minutes;
8. Charging box charging voltage 5V;
9. The charging box lakes 1hour, the charging box has a capacity of 300 mAh, and the charging red light flashes constantly;
10. The charging box can charge the earphone about 4 times
11. When the earphone is charging, the red light is always on, and the full light is off;
12. When the charging box is charging the earphone, the blue light is always on.

Warnings

1. Please do not overuse this earphone or put it under heavy pressure, keep away from wet and heat.
2. Keep away from WIFI, router, or other high-frequency transmitting equipment to prevent interruption of signal receiving.
3. Please use this earphone under its working range ( 10-15m), and the effect would be better if there is no obstacle between the connected devices.

Summary

1. Headphone dust screen
2. Multi-function touch button
3. MIC
4. Charging port Charging box charging port

RF warning statement:
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>