pengo 8RGRA-H01C01S0PE HDMI to USB-C 4K Grabber User Manual

: June 5, 2024
: pengo

Table of Contents

Introduction
Specifications
System requirements
Installation
Operating Instructions (Windows with OBS)
Operating Instructions (Mac OS with OBS)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HDMI to USB-C 4K GRABBER

User manual
(v.9)

Introduction

Pengo HDMI to USB-C 4K Grabber is designed to capture 4K UHD video, allowing the user to plug-in various 4K HDMI output devices (such as PS4, XBOX, Switch, camera, etc.) and uplink 4K UHD 30Hz data to the computer through the USB terminal. Streaming media made easy, capture every sound and movement. It will not affect your computer’s performance, while maintaining a resolution up to 4K at 30 fps.

Features

Supports HDMI 2.0 Standard up to 3840 x 2160p @ 60fps
Supports video capture at 3840 x 2160p @ 30fps
Supports deep color (36-bit color)
Supports HDR input
Supports USB 3.0
Supports UVC 1.0
Supports USB C connector
Supports USB port power supply, no need for an external power supply
Compatible with third-party applications, such as QuickTime, OBS, XSplit, vMix, etc.

Inside the box

Pengo HDMI to USB-C 4K Grabber x
USB-C (female) to USB-A (male) adapter x 1

Specifications

MODEL NAME	HDMI to USB-C 4K Grabber
INPUT INTERFACE	1 x HDMI 2.0 Type A
OUTPUT INTERFACE	1 x USB Type C (SuperSpeed) UVC
INPUT RESOLUTION	3840x2160p 60/50/30/25/24Hz 16:9

System requirements

CPU: i5 Dual Core 2.8GHz or higher
RAM: 4GB or higher
OS: Microsoft Windows 8.1/10 MacOS (10.13 and above)

Installation

Connect Pengo HDMI to USB-C 4K Grabber into the computer via USB 3.0 Port.
Plug in your devices (ie: PS4 Pro, Xbox One X, Camcorder) with an HDMI Cable into the HDMI input port.

Operating Instructions (Windows with OBS)

After plugging in your device, go to [Windows Settings] and then go under [BT and Other Devices] and make sure Pengo 4K Grabber is detected
Download OBS Studio: https://obsproject.com/ (OBS-Studio-25.0.8-Full-Installer-x64.exe)
Open OBS Studio. (version 25.0.8)
Video Setting
1.1 Add and select “Video Capture Device”, rename the source and click OK
1.2 Select “Pengo 4K Grabber” as your device
1.3 Parameter Setting references are displayed as below
Resolution/FPS Type: Custom
Resolution: 3840×2160
FPS: Match Output FPS (autoselect: 30)
Video Format: NV12
*Audio Device: HDMI (Pengo 4K Grabber)
Audio Setting
1.1 Click on the audio setting icon as displayed below
1.2 Select “Properties”
1.3 Under Properties: Select “HDMI (Pengo 4K Grabber)” as your device
1.4 Under the Audio Setting Icon: Select “Advanced Audio properties”
1.5 Under Advanced Audio Properties: Adjust your audio source to suggested preferences ( Microphone and speaker need to change the setting into Monitor and Output)
1.6 OBS Setting completed

Operating Instructions (Mac OS with OBS)

Video Setting
1.1 Under Sources, click on the “+” icon and select “Video Capture Device”
1.2 Rename the Input Source and click OK
1.3 Under Properties: Select “Pengo 4K Grabber” in Device
Do not click “Use Preset” and customize the configuration.
Resolution: select the best resolution possible 3840 x 2160
FPS: Simple FPS Values 30
*Input Format: NV12
Audio Setting
1.1 Click on the Audio Setting Icon as indicated below
1.2 Select “Properties”
1.3 Select “Pengo 4K Grabber” in Device
1.4 Click on the Audio Setting Icon and select “Advanced Audio Properties”
1.5 Under Advanced Audio Properties: Select “Monitor and Output”
1.6 Setting Completed